OMRON TIMER H3DE-M2 AC/DC24-230, US $40.00 – Picture 0

OMRON TIMER H3DE-M2 AC/DC24-230, US $40.00 – Picture 1

OMRON TIMER H3DE-M2 AC/DC24-230, US $40.00 – Picture 2

OMRON TIMER H3DE-M2 AC/DC24-230, US $40.00 – Picture 3

Omron Timer H3de-m2 Ac/dc24-230

US $40.00

Fairmount, Illinois, United States
Jun 9th

Open on mobile:
QR code

THESE TIMERS WERE TAKEN OFF A MACHINE NO LONGER IN SERVICE AND ARE KNOWN TO BE IN GOOD WORKING CONDITION.THIS AUCTION IS FOR A LOT OF 2.Timer, Multifunction Type, DPDT, Analog, 0.1 Second to 120 Hours, 24-230 VAC/VDCMfr. Part#: H3DE-M2 AC/DC24-230 Analog Timer, DC24 to 240V, AC24 to 240V Rated supply voltage 24 to 240VAC 50/60 Hz 24 to 240VDC ripple: 20% max. Input signals Start Input method Voltage input Control output (Type) Relay output (DPDT) Rated supply voltage 24 to 240VAC 50/60 Hz 24 to 240VDC ripple: 20% max. Operating voltage range 85% to 110% of rated supply voltage Input signals Start Input method Voltage input Voltage input High (logic) level: 20.4 to 264 VAC/DC Low (logic) level: 0 to 2.4 VAC/DC Minimum input signal width 50 ms min. (Start input) Power consumption ( Relay ON ) 6.6VA(at 240 VAC) 1.2W(at 24 VDC) Power consumption ( Relay OFF ) (at 240 VAC) (at 24 VDC) Reset voltage 10% max. of rated supply voltage Number of time ranges 8 Time ranges 0.1s~1.2s / 1s~12s / 10s~120s / 1min~12min / 10min~120min / 1h~12h / 10h~120h / 100h~1200h Operating mode ON delay, Flicker OFF start, Flicker ON start, Signal ON/OFF delay, Signal OFF delay, Interval, Signal ON/OFF delay, One shot output Control output (Type) Relay output (DPDT) Control output (Contact output) Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 30VDC 5A Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 125VDC 0.15A Switching capacities (resistive load (cos (phi) = 1)): 250VAC 5A / 125VDC 0.1A Minimum applicable load: 10 mA at 5 VDC (failure level: P) Ambient temperature Operating: -20 to 55°C Storage: -40 to 70°C Ambient humidity ???: 25~85% Accuracy of operating time +/- 1% max.(FS) (+/- 1% +/- 10 ms max. in a range of 1.2 s) Setting error -10 to 10% +/- 0.05 s max. (FS) Influence of voltage +/- 0.5% FS max. (+/- 0.5% +/- 10 ms max. in a range of 1.2 s) Influence of temperature +/- 2% FS max. (+/- 2% +/- 10 ms max. in a range of 1.2 s) Insulation resistance 100 M? (at 500 VDC) Dielectric strength between current carrying metal parts and non-current carrying metal parts: 2000 VAC, 50/60 Hz for 1 min between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min Impulse withstand voltage between power terminals: 5 kV between exposed non-current-carrying metal parts: 5 kV Noise immunity +/- 1.5 kV (between power terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 us, 1-ns rise) Static immunity Mulfunction: 4 kV Destruction: 8 kV Vibration resistance (Destruction) 10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 2 hours Vibration resistance (Malfunction) 10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10 min Shock resistance (Destruction) 1000 m/s**2, 3 times each 6 directions Shock resistance (Malfunction) 100 m/s**2, 3 times each 6 directions Mechanical life expectancy (relayoutput) 10000000 operations min. (under no load at 1800 operations/h) Electrical life expectancy (relay output) 100000 operations min. (5 A at 250 VAC, resistive load at 360 operations/h) Degree of protection IP30(Terminal Block: IP20) Weight (Main) Approx. 120 g

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	OMRON
Model	H3DE-M2 AC/DC24-230