Openvox A400p04 - Asterisk / Elastix / Trixbox / Freepbx - 4 Fxo

US $450

Footscray, VIC, Australia
Jan 30th

Open on mobile:
QR code

Up for auction is a as new OpenVox A400P01 4-port analog modular PCI card. This unit has come out of a working TrixBox PBX system and comes with: 4 FXO OpenVox modules for connectivity to the PSTN lines from an asterisk PBX // Product Overview Using standard Personal Computer (PC) hardware along with OpenVox A400P PCI cards allows home users and business customers alike to build inexpensive Internet Protocol Private Branch Exchange (IP PBX) platforms. The A400P is a half-length, 4-port Peripheral Component Interconnect (PCI) card and is fully compatible with Digium® TDM400P/TDM410P cards and modules. The A400P is compatible with leading open source IP PBX software such as Asterisk®, Trixbox®, and Elastix® (OpenVox are an Elastix® Strategic partner), which support all the sophisticated features of expensive high-end PBX/Voicemail platforms. OpenVox are a Fonality® Authorized / Certified Ecosystem (FACE) partner and the OpenVox A400P is officially certified for use with Trixbox®. // Feature Summary Support for 1 to 4 RJ-11 ports: Modular design with support for any combination of FXO and FXS interfaces as required Scalable: IP PBX systems can be upgraded with additional OpenVox PCI cards and FXO/FXS modules as required to support incremental growth Half length PCI card compatible with all commercially available PC motherboards Full hardware and software compatibility: Compatible with most well known brands of open source computer telephony equipment FXO/FXS modules pin-to-pin compatible with Digium® TDM400P/TDM410P/TDM800P/AEX800: OpenVox FXO/FXS modules can be used in Digium® cards and vice versa (Comes with 4 x FXO modules ready to go) Global telephony system support: Configurable line interface to meet international telephone line interface requirements // Technical Summary Fully PCI 2.2 compliant: Auto-sense compatibility for both 5v and 3.3v PCI busses 32bit / 33 Mhz PCI bus mastering: Direct Memory Access (DMA) for FXO/FXS serial module data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention Industrial Grade Surface Mounted Electronic Components: Minimal Signal Interference, Reduced Heat Transference and Increased Reliability Solid tantalum capacitors: High volumetric efficiency/reliability, low Equivalent Series Resistance (ESR) and temperature stability over the range -55°C to +85°C Integrated air vent holes: Increases convective air flow to improve cooling and increase the lifetime of the card components Programmable digital hybrid for near-end echo reduction Support for Digital Gain Control (Transmit and Receive) Dimensions excluding PCI bracket (H x L x W): 101mm x 136mm x 13mm / 4 ” x 5.4” x 0.5" Peak power: 5W with 4 FXO modules / 10W with 4 FXS modules ROHS compliant: No lead in the Printed Circuit Board (PCB) or parts