Original Kingston L-3 Early Case L Tractor Brass Carburetor Hit Miss Steam Nice!

US $325.95

  • Belgium, Wisconsin, United States
  • Mar 2nd
This is a real nice original and rather hard to find Kingston L3 brass carburetor for an early Case L or other tractor or car or truck.  It is in excellent used condition with no cracks, breaks, or repairs of any kind except for one small rust hole in the bowl near the drain.  This should be a pretty easy repair and very hard to notice as it'd on the very bottom of the bowl.   It has some very mild wear on the throttle and choke shaft and will likely work just fine the way it is.  It mounts with two holes 2 15/16 inches apart on center.   It has a 1 13/16 inch opening where it mounts to the manifold and a 2 inch air intake.  It stands about 7 3/8 inches tall overall.  The body is brass and will polish up very nicely if you so choose.  It has "A4919" stamped into the neck of it.  The fuel needle moves as it should and I can hear the float inside it.  The bowl nut has some wear on it but these are available from the hobby suppliers quite inexpensively.     Overall this is a very nice carburetor that should only need some minor cleaning and a drain cock needle on the bottom to be ready to be put to use on a tractor or put on the shelf for a spare.  Nice ones like this don't turn up very often so if you need one for any reason don't miss your chance on it.  It is a particularly tough one to find!  The pictures tell the story.  You won't be disappointed in any way.  I can be reached at 262 573 1931 if you'd like to talk about it.  Good Luck.
Please see pictures.
Country/Region of Manufacture United States

Directions

Similar products from Parts

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies