Ortec 556 High Voltage Power Supply Advanced Measurement Technology

US $420.00

  • Vallejo, California, United States
  • Jan 29th
The ORTEC 556 High Voltage Power Supply is a standard double-width NIM module that provides either polarity of output voltage from 50 to 3000 V, 0 to 10 mA. The adjusted output voltage of the selected polarity is vailable simultaneously through two SHV rear-panel connectors. A rearpanel slide switch permits operation on either 115- or 230-V ac input power, furnished through a removable power line cord and connector.   The 556 features a front-panel LCD meter which can be programmed via a front-panel toggle switch to display either output voltage or load current. The output voltage can be programmed by an external control via a rear-panel BNC connector.   The 556 provides the extremely stable, low-noise, high voltage that is required for proper bias of photomultiplier tubes, ionization chambers, and semiconductor detectors.   SPECIFICATIONS: PERFORMANCE: OUTPUT POLARITY - Positive or negative, selected by switch on rear panel. OUTPUT RANGE - 50 to 3000 V; minimum usable voltage 10 V. OUTPUT LOAD CAPACITY - 0 to 10 mA. REGULATION - <0.0025% variation in output voltage for combined line and load variations within operating range at constant ambient temperature. TEMPERATURE INSTABILITY - <±50 ppm/°C after 30 minute warmup; operating range 0 to 50°C. LONG-TERM DRIFT - <0.01%/hour and <0.03%/24-hour variation in output voltage at constant input line voltage, load, and ambient temperature after 30 minute warmup. OUTPUT RIPPLE - <10 mV peak-to-peak, 20 Hz to 20 MHZ. OVERLOAD PROTECTION - Internal circuitry protects against overloads including short circuits. RESETTABILITY - Output voltage can be reset to within 0.1%. FREE! Sellers: Add a FREE map to your listings. FREE! Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Brand ORTEC
Model 556

Directions

Similar products from AC Power Supplies & Adapters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies