+ Post new Ad
OSG - 8662510 - 5.10MM/0.2008" Solid Carbide Thru Coolant Jobber Length Drill, US $150.00 – Picture 0
OSG - 8662510 - 5.10MM/0.2008" Solid Carbide Thru Coolant Jobber Length Drill, US $150.00 – Picture 1
OSG - 8662510 - 5.10MM/0.2008" Solid Carbide Thru Coolant Jobber Length Drill, US $150.00 – Picture 0
OSG - 8662510 - 5.10MM/0.2008" Solid Carbide Thru Coolant Jobber Length Drill, US $150.00 – Picture 1

Osg - 8662510 - 5.10mm/0.2008" Solid Carbide Thru Coolant Jobber Length Drill

US $150.00

  • Fort Myers, Florida, United States
  • Jan 30th
Open on mobile:
QR code
Jobber Length Drill Bits; Series/List: 5610; Drill Bit Size (mm): 5.10; Drill Bit Size (Decimal Inch): 0.2008; Drill Bit Finish/Coating: WD1; Drill Bit Material: Solid Carbide; Flute Length (mm): 45.00 Series/List 5610 Drill Bit Size (mm) 5.10 Drill Bit Size (Decimal Inch) 0.2008 Drill Bit Finish/Coating WD1 Drill Bit Material Solid Carbide Flute Length (mm) 45.00 Flute Type Spiral Spiral Type Regular Spiral Drill Point Angle 140 Number of Flutes 3 Overall Length (mm) 95.00 Through Coolant (Yes/No) Yes Cutting Direction Right Hand Point Type Standard Flute Length x Diameter Ratio 5xD Shank Type Straight Web Thinning R-Thinned
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand OSG

Directions

Similar products from Solid Carbide Drill Bits

Guhring .271" (6.9mm) Long Carbide Drill w/ Thru Coolant 5525 12xD Firex NR!

Guhring .271" (6.9mm) Long Carbide Drill w/ Thru Coolant 5525 12xD Firex NR!

  • Delaware, Ohio, United States
  • Jan 30th
(4) New Garr Solid Carbide Center Drills #1, #2, #3, & #4

(4) New Garr Solid Carbide Center Drills #1, #2, #3, & #4

  • United States
  • Jan 30th
SOLID CARBIDE BORING BAR BORE MICRO 5/16"

SOLID CARBIDE BORING BAR BORE MICRO 5/16"

  • Twin Lakes, Wisconsin, United States
  • Jan 30th
WIDIA HANITA SOLID CARBIDE ENDMILL 3/8 DIA 4 FLUTE R.060 P/N TF4V0510004C

WIDIA HANITA SOLID CARBIDE ENDMILL 3/8 DIA 4 FLUTE R.060 P/N TF4V0510004C

  • Woodinville, Washington, United States
  • Jan 30th
.0118"....0.30mm....50 Micro Carbide Drill Bits....FREE SHIPPING

.0118"....0.30mm....50 Micro Carbide Drill Bits....FREE SHIPPING

  • Fuquay Varina, North Carolina, United States
  • Jan 30th
.0098"....0.25mm....50 Micro Carbide Drill Bits....FREE SHIPPING

.0098"....0.25mm....50 Micro Carbide Drill Bits....FREE SHIPPING

  • Fuquay Varina, North Carolina, United States
  • Jan 30th
.0138"....0.35mm....50 Micro Carbide Drill Bits....FREE SHIPPING

.0138"....0.35mm....50 Micro Carbide Drill Bits....FREE SHIPPING

  • Fuquay Varina, North Carolina, United States
  • Jan 30th
.0240 (.024)....#73....50 Micro Carbide Drill Bits....FREE SHIPPING

.0240 (.024)....#73....50 Micro Carbide Drill Bits....FREE SHIPPING

  • Fuquay Varina, North Carolina, United States
  • Jan 30th
.0225"....#74....50 Micro Carbide Drill Bits....FREE SHIPPING

.0225"....#74....50 Micro Carbide Drill Bits....FREE SHIPPING

  • Fuquay Varina, North Carolina, United States
  • Jan 30th
#3 SOLID CARBIDE DRILL 118 DEGREE SPLIT POINT 3" OAL (B-2-2-1-57)

#3 SOLID CARBIDE DRILL 118 DEGREE SPLIT POINT 3" OAL (B-2-2-1-57)

  • Mitchell, Indiana, United States
  • Jan 30th
OSG - 52631211 - 5/16" Solid Carbide TiAIN Coated Thru Coolant Jobber Drill

OSG - 52631211 - 5/16" Solid Carbide TiAIN Coated Thru Coolant Jobber Drill

  • Fort Myers, Florida, United States
  • Jan 30th
OSG HY-PRO 9.4mm Solid Carbide Coolant Fed Drill 8xD TiALN (HP258-3701)

OSG HY-PRO 9.4mm Solid Carbide Coolant Fed Drill 8xD TiALN (HP258-3701)

  • Round Lake, Illinois, United States
  • Jan 30th
Set 0.3—1.2mm PCB Print Circuit Board Drill Bits 10pcs

Set 0.3—1.2mm PCB Print Circuit Board Drill Bits 10pcs

  • ???, ???, China
  • Jan 30th
1 x 1.5mm (0.059") PCB Print Circuit Board Drill Bits

1 x 1.5mm (0.059") PCB Print Circuit Board Drill Bits

  • ???, ???, China
  • Jan 30th
PROMAX Solid Carbide Chamfer Spot Drills sz 3/8" Overall 2-1/2" 90° [pak 2]

PROMAX Solid Carbide Chamfer Spot Drills sz 3/8" Overall 2-1/2" 90° [pak 2]

  • Flushing, New York, United States
  • Jan 30th
Walter Titex 7.7 mm solid carbide drill with internal cooling (A6485TFT-7.7)

Walter Titex 7.7 mm solid carbide drill with internal cooling (A6485TFT-7.7)

  • Englewood, Colorado, United States
  • Jan 30th
KENNAMETAL SOLID CARBIDE TX-DRILL B411A0465 KF1

KENNAMETAL SOLID CARBIDE TX-DRILL B411A0465 KF1

  • Norwood, Massachusetts, United States
  • Jan 30th
BASSETT MSE 2FL 11/32 SQUARE NOSE CARBIDE ENDMILL

BASSETT MSE 2FL 11/32 SQUARE NOSE CARBIDE ENDMILL

  • Norwood, Massachusetts, United States
  • Jan 30th
GARR TOOL SOLID CARBIDE DRILL 1200 7/32

GARR TOOL SOLID CARBIDE DRILL 1200 7/32

  • Norwood, Massachusetts, United States
  • Jan 30th
YG-1 Tank Power End Mill E9990902

YG-1 Tank Power End Mill E9990902

  • Tacoma, Washington, United States
  • Jan 30th

People who viewed this item also vieved

LOT OF 5 EXTENSION COUNTERBORE 4”, 6" & 8"

LOT OF 5 EXTENSION COUNTERBORE 4”, 6" & 8"

  • La Verne, California, United States
  • Mar 9th
TWO EXTENSION COUNTERBORE 4” & 8"

TWO EXTENSION COUNTERBORE 4” & 8"

  • La Verne, California, United States
  • Mar 9th
ATI AT470A-1 EXTENSION COUNTERBORE 4” Long 1/4” Diameter

ATI AT470A-1 EXTENSION COUNTERBORE 4” Long 1/4” Diameter

  • La Verne, California, United States
  • Mar 9th
27/32" PTD TAPER LENGTH DRILL

27/32" PTD TAPER LENGTH DRILL

  • Mount Clare, West Virginia, United States
  • Mar 11th
13/16" STUB LENGTH TAPERED SHANK DRILL

13/16" STUB LENGTH TAPERED SHANK DRILL

  • Mount Clare, West Virginia, United States
  • Mar 11th
1-15/64" STRAIGHT SHANK TAPER LENGTH H.S. DRILL

1-15/64" STRAIGHT SHANK TAPER LENGTH H.S. DRILL

  • Mount Clare, West Virginia, United States
  • Mar 11th
Taper length & Extended Length Drill Bits. 182 Pcs.

Taper length & Extended Length Drill Bits. 182 Pcs.

  • Myrtle Beach, South Carolina, United States
  • May 3rd
ACME spadet drill extended length

ACME spadet drill extended length

  • Rome, New York, United States
  • May 3rd
3/8" EXTRA LONG DRILL BIT, 12" LENGTH, 8" FLUTE LENGTH, BLACK OXIDE, NEW

3/8" EXTRA LONG DRILL BIT, 12" LENGTH, 8" FLUTE LENGTH, BLACK OXIDE, NEW

  • Woodstock, Illinois, United States
  • May 4th
STERLING 11/16 X 36" GUN DRILL CARBIDE TIPPED #GA068753600 STK 3165

STERLING 11/16 X 36" GUN DRILL CARBIDE TIPPED #GA068753600 STK 3165

  • Wadley, Alabama, United States
  • May 29th
Guhring SL-Ratiobohrer U 5512 Carbide Coolant fed Drill 0..4055" (10.3mm) Dia

Guhring SL-Ratiobohrer U 5512 Carbide Coolant fed Drill 0..4055" (10.3mm) Dia

  • Marks, Mississippi, United States
  • May 30th
Milwaukee 49-32-0081 Hawg Wash Cooling Lubricant 16 oz Bottle

Milwaukee 49-32-0081 Hawg Wash Cooling Lubricant 16 oz Bottle

  • La Porte, Indiana, United States
  • May 30th
QTY:12 Union Made High Speed Twist Drills Size 11/64" Jobber 04560 USA SHIPPING

QTY:12 Union Made High Speed Twist Drills Size 11/64" Jobber 04560 USA SHIPPING

  • Saint Paul, Minnesota, United States
  • Jun 11th
1.5mm 2mm 2.5mm 3mm Tip Round Shank HSS Twist Drill Bit 13 Pcs

1.5mm 2mm 2.5mm 3mm Tip Round Shank HSS Twist Drill Bit 13 Pcs

  • United States
  • Jun 12th
12 new TRIUMPH 1/4" Jobber Length HSS Heavy-Duty Twist Drills USA

12 new TRIUMPH 1/4" Jobber Length HSS Heavy-Duty Twist Drills USA

  • Jacksonville, Florida, United States
  • Jun 12th
29/64 COBALT SCREW MACHINE DRILL, 130 DEG, ALCRN COATED 3XD (B-4-6-4-1-OFG)

29/64 COBALT SCREW MACHINE DRILL, 130 DEG, ALCRN COATED 3XD (B-4-6-4-1-OFG)

  • Mitchell, Indiana, United States
  • May 26th
C-L 23/32" x Screw Machine Length Twist Drill Bit

C-L 23/32" x Screw Machine Length Twist Drill Bit

  • Coventry, Rhode Island, United States
  • May 26th
3/4" COBALT S.M. LENGTH DRILL, 3-1/8" LOF, 5" OAL, PTD M40CO 46048

3/4" COBALT S.M. LENGTH DRILL, 3-1/8" LOF, 5" OAL, PTD M40CO 46048

  • Glendale, Arizona, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies