Osmosis Water Level Automatic On/ Off Controller With 2 Output Made In Israel

US $23.70

  • Bnei Brak , Israel
  • Mar 6th
This is Automatic on / off water Pump control use for control water's level in the tank. It wills automatic stop the pump when water reaches to high level and start the pump again when the water reaches the lower level (The higher and lower are set by the user) There are several applications to connect as shown in Figure    Power supply: 24 Vdc High quality Made in Israel  How it works. Controller has 2 inputs for 2 float switch. one for the upper level and one for the lower level. When water flows down to the lower float the output of the pump turns on. At the same time other output enabled (Immediately) for about 250 seconds. After this time the output is stopped and replaced by a fixed output. When the water reaches an upper level  the fixed output and the output for pump will be stopped.                                        Why is there a delay time of 250 seconds?                               When you need osmosis water the quality of the water in the first minute is poor.                                                                   This controller can connect two Solenoid Valve.                                                        When one Solenoid Valve connected to the immediate output Take out the poor quality of water out of the tank. After this delay Solenoid Valve is closed and the water passed through the Solenoid Valve that is connected to the fixed output into the tank.   Excellnt but I do not use osmosis.  In this case shorten the delay output with the immediately output.                               Connect the short output to horn or lamp for indication that the water has not reached the upper level.   It's great but I want to keep a low water level. When you want the water in the tank or pond will not be surf \ above a certain level. All you have to do is place the float that is connected to the "water level down" at the top of the tank\pool. And the float that is connected to "water level up" at the bottom of the tank \ pool. In this case shorten the delay output with the output immediately.         Connect the short output to horn or lamp for indication that the water has not reached the lower level.   Package includes: water level Automatic on / off controller $$$ The products were tested before shipped to you. $$$                                                  

Directions

Similar products from Distance Measuring, Humidity, Pressure & Other Sensors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies