+ Post new Ad
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 0
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 1
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 2
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 3
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 4
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 5
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 6
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 7
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 8
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 0
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 1
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 2
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 3
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 4
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 5
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 6
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 7
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2", US $480 – Picture 8

Pair Of Brown & Sharpe V-blocks No.750-e 2" X 2" X 2 1/2"

US $480

  • Utica, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Pair of Brown & Sharpe V-Blocks No.750-E 2" x 2" x 2 1/2" Nice pair of Brown & Sharpe No.750-E V-Blocks. Approximate size 2” x 2” x 2 1/2”. Estate purchased tools. Used but not beat up. Minimal staining. One has some grind marks on one end. Possibly ID mark removal. Both have # 138 stamped on side opposite factory ID mark. Probably a mfg batch number. See pic’s for best description. Thanks for looking. USA shipping only. I will combine shipping with multiple purchases. Payment due within 3 days of auction end.  _gsrx_vers_603 (GS 6.9 (603))
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “As found used condition.”

Directions

Similar products from Supporting Blocks & Sets

Machinists 12/3B BUY NOW Goody Bag # 3 -- Pair 1.5 x 2.5 x .875 Set Up Blocks

Machinists 12/3B BUY NOW Goody Bag # 3 -- Pair 1.5 x 2.5 x .875 Set Up Blocks

  • Lutz, Florida, United States
  • Jan 30th
Starrett V Block and Clamp Kit 568C 1 Pair with Original Box. Free USA Shipping

Starrett V Block and Clamp Kit 568C 1 Pair with Original Box. Free USA Shipping

  • Darien Center, New York, United States
  • Jan 30th
Brown / Sharpe 750-2 1 Piece V Block Hardened Steel

Brown / Sharpe 750-2 1 Piece V Block Hardened Steel

  • Englewood, Florida, United States
  • Jan 30th
1-2-3 Blocks,,,,set up

1-2-3 Blocks,,,,set up

  • Nashville, Tennessee, United States
  • Jan 30th
No. 3 BROWN & SHARPE MACHINIST V-BLOCK AND CLAMP 750-A

No. 3 BROWN & SHARPE MACHINIST V-BLOCK AND CLAMP 750-A

  • Chicopee, Massachusetts, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Tools Cutters Parts Etc r

MACHINIST LATHE MILL Lot of Machinist Tools Cutters Parts Etc r

  • Morris Plains, New Jersey, United States
  • Jan 30th
Starrett No. 566 Magnetic V Block Machinist Inspection Grinder QC Grind

Starrett No. 566 Magnetic V Block Machinist Inspection Grinder QC Grind

  • Howell, Michigan, United States
  • Jan 30th
Starrett No 566 Magnetic V Block Made In USA Inspection Grinder Machinist

Starrett No 566 Magnetic V Block Made In USA Inspection Grinder Machinist

  • Howell, Michigan, United States
  • Jan 30th
U.S.A. Made! Pair of ToolMatic & Other 1" x 2" x 3" 1-2-3 Blocks

U.S.A. Made! Pair of ToolMatic & Other 1" x 2" x 3" 1-2-3 Blocks

  • Riverside, California, United States
  • Jan 30th
V blocks set wooden box new 2-3/8"

V blocks set wooden box new 2-3/8"

  • Port Trevorton, Pennsylvania, United States
  • Jan 30th
Brown and Sharpe 750A V-Block and Clamps

Brown and Sharpe 750A V-Block and Clamps

  • Kihei, Hawaii, United States
  • Jan 30th
LUFKIN #905 VEE BLOCKS & HOLD DOWN CLAMPS Made in U.S.A.

LUFKIN #905 VEE BLOCKS & HOLD DOWN CLAMPS Made in U.S.A.

  • Roseville, Michigan, United States
  • Jan 30th
Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holder Sine Bar

Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holder Sine Bar

  • Mount Juliet, Tennessee, United States
  • Jan 30th
Angle plate with v slot

Angle plate with v slot

  • Bronson, Florida, United States
  • Jan 30th
Vintage Starrett No. 567 V-Block with Clamp - Fish Tail Style Workholding

Vintage Starrett No. 567 V-Block with Clamp - Fish Tail Style Workholding

  • Brecksville, Ohio, United States
  • Jan 30th
vtg~L.S. STARRETT CO.~2 V-BLOCKS No. 271, CLAMP, & ALIGNING ROD~MACHINISTS TOOLS

vtg~L.S. STARRETT CO.~2 V-BLOCKS No. 271, CLAMP, & ALIGNING ROD~MACHINISTS TOOLS

  • Denver, Colorado, United States
  • Jan 30th
Machinists 11/28C Buy NOW USA Heirloom Quality Solid 1-2-3 Block Set -Stewart

Machinists 11/28C Buy NOW USA Heirloom Quality Solid 1-2-3 Block Set -Stewart

  • Lutz, Florida, United States
  • Jan 30th
Machinists 11/28C Buy NOW USA Heirloom Quality Solid 1-2-3 Block Set -"B" -Set

Machinists 11/28C Buy NOW USA Heirloom Quality Solid 1-2-3 Block Set -"B" -Set

  • Lutz, Florida, United States
  • Jan 30th
Machinists 11/28C Buy NOW USA Heirloom Quality Solid 1-2-3 Block Set -"C" -Set

Machinists 11/28C Buy NOW USA Heirloom Quality Solid 1-2-3 Block Set -"C" -Set

  • Lutz, Florida, United States
  • Jan 30th
Machinists DS #1 Matched Large Stepped angle Plates --Set of Two MATCHED

Machinists DS #1 Matched Large Stepped angle Plates --Set of Two MATCHED

  • Lutz, Florida, United States
  • Jan 30th

People who viewed this item also vieved

Royal High Speed Precision Tri Bearing Live Center Extended Point MT#4

Royal High Speed Precision Tri Bearing Live Center Extended Point MT#4

  • Johnson City, New York, United States
  • Jun 8th
Royal High Speed Precision Quad Bearing Live Center Extended Point MT#4

Royal High Speed Precision Quad Bearing Live Center Extended Point MT#4

  • Johnson City, New York, United States
  • Jun 8th
Royal #5 Morse Taper Quad Bearing Live Center #10406

Royal #5 Morse Taper Quad Bearing Live Center #10406

  • Johnson City, New York, United States
  • Jun 8th
PHASE II Adjustable Tailstock for 12''

PHASE II Adjustable Tailstock for 12''

  • Duncan, South Carolina, United States
  • Jun 8th
JERGENS 850204 KLP RING HANDLE M5 X 30 SS

JERGENS 850204 KLP RING HANDLE M5 X 30 SS

  • Novi, Michigan, United States
  • Jun 8th
new IRWIN RECORD 1SB, 360° Blue Swivel Base for #1 Vice

new IRWIN RECORD 1SB, 360° Blue Swivel Base for #1 Vice

  • Champlain, New York, United States
  • Jun 9th
HARDINGE 15/16" PRECISION 5C COLLET FOR LATHE MILL MACHINIST METALWORKING

HARDINGE 15/16" PRECISION 5C COLLET FOR LATHE MILL MACHINIST METALWORKING

  • Chino, California, United States
  • Jun 9th
HARDINGE11/16" PRECISION 5C COLLET FOR LATHE MILL MACHINIST METALWORKING

HARDINGE11/16" PRECISION 5C COLLET FOR LATHE MILL MACHINIST METALWORKING

  • Chino, California, United States
  • Jun 9th
HARDINGE 31/32" PRECISION 5C COLLET FOR LATHE MILL MACHINIST METALWORKING

HARDINGE 31/32" PRECISION 5C COLLET FOR LATHE MILL MACHINIST METALWORKING

  • Chino, California, United States
  • Jun 9th
DE STA CO 385-41 650 PULL ACTION TOGGLE CLAMPS QUANTITY 2

DE STA CO 385-41 650 PULL ACTION TOGGLE CLAMPS QUANTITY 2

  • Naperville, Illinois, United States
  • Jun 9th
MHC Step Block and Clamp Set, 52 Pc., 1/2-13 Stud 1" Block, 5/8" T, |PU4|

MHC Step Block and Clamp Set, 52 Pc., 1/2-13 Stud 1" Block, 5/8" T, |PU4|

  • Saint Louis, Missouri, United States
  • Jun 9th
KANT TWIST CLAMP 421 6D 6" DEEP MATERIAL HOLDING VISE T-STYLE NEW MADE IN USA!

KANT TWIST CLAMP 421 6D 6" DEEP MATERIAL HOLDING VISE T-STYLE NEW MADE IN USA!

  • San Diego, California, United States
  • Jun 9th
Vintage 3-3/8" Machinist (lathe??) vice with degree markings on turret

Vintage 3-3/8" Machinist (lathe??) vice with degree markings on turret

  • Pikesville, Maryland, United States
  • Jun 9th
Vintage fine working columbian model 504m 4" jaw vise opens to 6" heavy duty

Vintage fine working columbian model 504m 4" jaw vise opens to 6" heavy duty

  • Paynes Creek, California, United States
  • Jun 9th
RARE #70 AM CO ATHOL MASS USA MACHINIST 2" JAW QUICK ADJUST VISE VULCAN CO

RARE #70 AM CO ATHOL MASS USA MACHINIST 2" JAW QUICK ADJUST VISE VULCAN CO

  • By the Bay, Rhode Island, United States
  • Jun 9th
metal spinning mandrels,metal spinning forms

metal spinning mandrels,metal spinning forms

  • Bennington, New Hampshire, United States
  • Jun 9th
#35 Brown & Sharpe 750D Magnetic V Block In Fitted Wooden Case USA

#35 Brown & Sharpe 750D Magnetic V Block In Fitted Wooden Case USA

  • Baldwin Park, California, United States
  • Jun 9th
metal spinning mandrel,metal spinning form

metal spinning mandrel,metal spinning form

  • Bennington, New Hampshire, United States
  • Jun 9th
Young Bros. Young Bros 07363 36 Piece Heavy Duty Stamp Combination Letter and

Young Bros. Young Bros 07363 36 Piece Heavy Duty Stamp Combination Letter and

  • USA, United States
  • Nov 3rd
Young Bros. Young Bros 08363 36 Piece Heavy Duty Stamp Combination Letter and

Young Bros. Young Bros 08363 36 Piece Heavy Duty Stamp Combination Letter and

  • USA, United States
  • Nov 3rd
BATH 1-8 PLUG TAP MACHINIST TOOLMAKER

BATH 1-8 PLUG TAP MACHINIST TOOLMAKER

  • Los Angeles, California, United States
  • Nov 3rd
CNC Router Rotary Table Axis 4th Axis 3 Jaw Chuck 100mm K11-100 Hollow Shaft

CNC Router Rotary Table Axis 4th Axis 3 Jaw Chuck 100mm K11-100 Hollow Shaft

  • shenzhen,Guangdong, China
  • Nov 17th
CNC Router Rotational Rotary Axis4th axis 3 Jaw 100mm Ratio 4:1 for CNC Machine

CNC Router Rotational Rotary Axis4th axis 3 Jaw 100mm Ratio 4:1 for CNC Machine

  • shenzhen,Guangdong, China
  • Nov 17th
Mini CNC Engraving Rotary Table Axis 5th Axis 3 Jaw Ratio 6:1 CNC Dividing Head

Mini CNC Engraving Rotary Table Axis 5th Axis 3 Jaw Ratio 6:1 CNC Dividing Head

  • shenzhen,Guangdong, China
  • Nov 17th
Replacement Spring Collets 8Pcs ER11 ER11A 5mm Motor Shaft Holder Carbon Steel

Replacement Spring Collets 8Pcs ER11 ER11A 5mm Motor Shaft Holder Carbon Steel

  • suzhou, China
  • Jun 9th
52 Pc. Te-Co 5/8" x 1/2-13 Workholding Machinist Clamp Kit for Bridgeport Mill

52 Pc. Te-Co 5/8" x 1/2-13 Workholding Machinist Clamp Kit for Bridgeport Mill

  • Hamden, Connecticut, United States
  • Jun 10th
1/2-inch Collet Nut Plunge Router Parts Black for Makita 3612

1/2-inch Collet Nut Plunge Router Parts Black for Makita 3612

  • Marina del Rey, California, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies