+ Post new Ad
PAIR VINTAGEWILTON 403 C-CLAMP PLUS ARMSTRONG 404--USA--METALWOORKING--VERY FINE, US $93 – Picture 0
PAIR VINTAGEWILTON 403 C-CLAMP PLUS ARMSTRONG 404--USA--METALWOORKING--VERY FINE, US $93 – Picture 0

Pair Vintagewilton 403 C-clamp Plus Armstrong 404--usa--metalwoorking--very Fine

US $93

  • Staten Island, New York, United States
  • Nov 1st
Open on mobile:
QR code
This pair of three inch clamps are forged with 403 MADE IN U.S.A. DROP FORGED STEEL and stamped WILTON on the other side.  They probably were made between 1957 and the 1970's while Wilton was in Schiller Park, Illinois, outside Chicago. They have a three inch opening and a 2 1/2 inch throat and a 5/8 inch spindle.      The Armstrong four inch C-clamp is forged with ARMSTRONG CHICAGO U.S.A. AND No.404 DROP FORGED CLAMP with the Armstrong logo.  It has a four inch opening and a 2 1/2 inch throat and a 5/8 inch spindle.   These three high quality clamps are ideal for steel fabrication, industrial maintenance, industrial welding and production, although they can be used for light duty work too.   I combine mailing to minimize postage.  See my other Wilton clamps!

Directions

Similar products from Clips & Jaws

E-TING New 4 PCS Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B

E-TING New 4 PCS Hand Tool Toggle Clamp 201B Antislip Red Horizontal Clamp 201-B

  • USA, United States
  • Nov 3rd
NEW Te-co 33816 EXTRA LARGE nuzzler edge clamp

NEW Te-co 33816 EXTRA LARGE nuzzler edge clamp

  • Romeo, Michigan, United States
  • Nov 2nd
CARR LANE CL-8-EXP-2.00

CARR LANE CL-8-EXP-2.00

  • Mukilteo, Washington, United States
  • Nov 2nd
Mathey dearman jack bar excellent condition

Mathey dearman jack bar excellent condition

  • Roebling, New Jersey, United States
  • Nov 2nd
BTM 745100G-R-SC2PDC POWER CLAMP - USED - FREE SHIPPING!!!

BTM 745100G-R-SC2PDC POWER CLAMP - USED - FREE SHIPPING!!!

  • North Olmsted, Ohio, United States
  • Nov 2nd
LONERGAN POINTED PIN 0483000017 5/16-18 THREAD 5/16" OD 2-1/16" LENGTH LOT OF 2

LONERGAN POINTED PIN 0483000017 5/16-18 THREAD 5/16" OD 2-1/16" LENGTH LOT OF 2

  • Clover, South Carolina, United States
  • Nov 2nd
Armstrong Model # 78-081 -- 8-1/4 in. Heavy Duty Long Pattern C-Clamp

Armstrong Model # 78-081 -- 8-1/4 in. Heavy Duty Long Pattern C-Clamp

  • Brooklyn, New York, United States
  • Nov 2nd
Armstrong Model # 78-080 -- 8-1/4 in. Heavy Duty Pattern C-Clamp

Armstrong Model # 78-080 -- 8-1/4 in. Heavy Duty Pattern C-Clamp

  • Brooklyn, New York, United States
  • Nov 2nd
Vintage DE-STA-CO 803 / 603 Pneumatic Straight Line Clamp

Vintage DE-STA-CO 803 / 603 Pneumatic Straight Line Clamp

  • Athens, Georgia, United States
  • Nov 2nd
DE-STA-CO 601-O Straight-Line Action Clamp

DE-STA-CO 601-O Straight-Line Action Clamp

  • US, United States
  • Nov 1st
DE-STA-CO, 82L4G-2030000 Pneumatic Power Clamp, 3360 Lbs Cap Alum /KS3/RL5055

DE-STA-CO, 82L4G-2030000 Pneumatic Power Clamp, 3360 Lbs Cap Alum /KS3/RL5055

  • Saint Louis, Missouri, United States
  • Nov 1st
Lufkin No. 910E Machinist Parallel Clamp

Lufkin No. 910E Machinist Parallel Clamp

  • Greenville, Pennsylvania, United States
  • Nov 1st
New Red 102B 180Kg 397 Lbs Holding Capacity U Shape Bar Vertical Toggle Clamp HP

New Red 102B 180Kg 397 Lbs Holding Capacity U Shape Bar Vertical Toggle Clamp HP

  • Hong Kong, Hong Kong
  • Nov 1st
4" Bridge, Boiler,HD C-Clamp,No.4,Opens 0 to 4-1/4",Unmarked ~NICE #BC110116

4" Bridge, Boiler,HD C-Clamp,No.4,Opens 0 to 4-1/4",Unmarked ~NICE #BC110116

  • Cocoa, Florida, United States
  • Nov 1st
1-lot 0f 18 pcs of Robb Jack Solid Carbide 3/4" x 1/4 " x Various Thickness

1-lot 0f 18 pcs of Robb Jack Solid Carbide 3/4" x 1/4 " x Various Thickness

  • National City, California, United States
  • Oct 31st
Lot of (3) Irwin 11R 11" Regular Tip Vise Grips,Pair,Original,4" Opening,C-Clamp

Lot of (3) Irwin 11R 11" Regular Tip Vise Grips,Pair,Original,4" Opening,C-Clamp

  • Clio, Michigan, United States
  • Oct 31st
4PCS Toggle Clamp GH-201A 201-A Horizontal Hold Hold Quick Hand Tool Release

4PCS Toggle Clamp GH-201A 201-A Horizontal Hold Hold Quick Hand Tool Release

  • Hong Kong, Hong Kong
  • Oct 31st
LOT OF 3 MACHINIST TOOL MAKERS PARRALLEL CLAMPS,STARRETT,BROWNSHARPE ,

LOT OF 3 MACHINIST TOOL MAKERS PARRALLEL CLAMPS,STARRETT,BROWNSHARPE ,

  • Staten Island, New York, United States
  • Oct 31st
3 410 KANT TWIST CLAMPS

3 410 KANT TWIST CLAMPS

  • Hadley, Pennsylvania, United States
  • Oct 31st
2PC KANT-TWIST 4 1/2D T-HANDLE CLAMP MACHINISTS CLAMP 415 MADE IN USA

2PC KANT-TWIST 4 1/2D T-HANDLE CLAMP MACHINISTS CLAMP 415 MADE IN USA

  • Hadley, Pennsylvania, United States
  • Oct 31st

People who viewed this item also vieved

MACHINIST MILL LATHE 6" Micro Machinist Combination Square Level Ruler Mitutoyo

MACHINIST MILL LATHE 6" Micro Machinist Combination Square Level Ruler Mitutoyo

  • Morris Plains, New Jersey, United States
  • Jan 30th
NICE !! PAIR OF V BLOCKS

NICE !! PAIR OF V BLOCKS

  • Norwalk, California, United States
  • Jan 30th
Pair 90Degree 3"x4"x3" U-Grind V-Block Kit

Pair 90Degree 3"x4"x3" U-Grind V-Block Kit

  • Newark, New Jersey, United States
  • Jan 30th
LOT of (5) CONCENTRIC LIVE CENTERS, 4MT, SPRING LOADED, AS-IS

LOT of (5) CONCENTRIC LIVE CENTERS, 4MT, SPRING LOADED, AS-IS

  • Bremen, Indiana, United States
  • Jan 30th
Lot of 6 Brown & Sharpe Taper Dead Centers

Lot of 6 Brown & Sharpe Taper Dead Centers

  • West Warwick, Rhode Island, United States
  • Jan 30th
NICE!! SKODA LIVE CENTER SET MT 4

NICE!! SKODA LIVE CENTER SET MT 4

  • Norwalk, California, United States
  • Jan 30th
6" 3-JAW CHUCK MASTER JAW SET

6" 3-JAW CHUCK MASTER JAW SET

  • Caledonia, Wisconsin, United States
  • Jan 30th
Jacobs Spindle Nose Lathe Chuck L1 Spindle Mount (Inv.31945)

Jacobs Spindle Nose Lathe Chuck L1 Spindle Mount (Inv.31945)

  • Portland, Connecticut, United States
  • Jan 30th
HURON 12" 3-JAW CHUCK SOFT STEEL I.D. JAWS,TONGUE & GROOVE BUCK,CUSHMAN,BISON

HURON 12" 3-JAW CHUCK SOFT STEEL I.D. JAWS,TONGUE & GROOVE BUCK,CUSHMAN,BISON

  • Caledonia, Wisconsin, United States
  • Jan 30th
Hardinge Sjogren No. 2 Speed Chuck for 2J collets, good condition

Hardinge Sjogren No. 2 Speed Chuck for 2J collets, good condition

  • Modesto, California, United States
  • Jan 30th
Microcentric CB-65D Collet Chuck with L250 Collet

Microcentric CB-65D Collet Chuck with L250 Collet

  • Sun Prairie, Wisconsin, United States
  • Jan 30th
CARBOLOY CAT 40 TG100 COLLET CHUCK CV40-CC-5.19-1000

CARBOLOY CAT 40 TG100 COLLET CHUCK CV40-CC-5.19-1000

  • Wadley, Alabama, United States
  • Jan 30th
HARDINGE 3/32" Round 16C Collet, Used

HARDINGE 3/32" Round 16C Collet, Used

  • West Babylon, New York, United States
  • Jan 30th
HARDINGE 1/8" Round 16C Collet, Used

HARDINGE 1/8" Round 16C Collet, Used

  • West Babylon, New York, United States
  • Jan 30th
LYNDEX 13/16" Hexagon 16C Collet, Used

LYNDEX 13/16" Hexagon 16C Collet, Used

  • West Babylon, New York, United States
  • Jan 30th
MACHINIST LATHE FACE PLATE TOOL

MACHINIST LATHE FACE PLATE TOOL

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
ANGLE PLATE W/ “V” Groove’s Cast Steel Hardened & Ground V.G.C.+

ANGLE PLATE W/ “V” Groove’s Cast Steel Hardened & Ground V.G.C.+

  • Rome, New York, United States
  • Jan 30th
WESTWIND HIGH SPEED AIR BEARING SPINDLE D1073

WESTWIND HIGH SPEED AIR BEARING SPINDLE D1073

  • Anoka, Minnesota, United States
  • Jan 30th
VINTAGE TAP WRENCH CARD 1/4 TAPS

VINTAGE TAP WRENCH CARD 1/4 TAPS

  • Saint Paul, Minnesota, United States
  • Jan 30th
STARRETT Adjustable Parallels - Model: 154A

STARRETT Adjustable Parallels - Model: 154A

  • Flushing, New York, United States
  • Jan 30th
Aluminum CNC tombstone large 800 lbs, 41.5" x 30" x 8.5" thick, new

Aluminum CNC tombstone large 800 lbs, 41.5" x 30" x 8.5" thick, new

  • Modesto, California, United States
  • Jan 30th
HAAS SRT-7 SRT7 ROTARY TABLE 4TH AXIS 6" PLATTER 17 PIN BRUSH TYPE FADAL LMSI

HAAS SRT-7 SRT7 ROTARY TABLE 4TH AXIS 6" PLATTER 17 PIN BRUSH TYPE FADAL LMSI

  • Sun Valley, California, United States
  • Jan 30th
HAAS SRT9 4TH AXIS ROTARY TABLE W/ MOUNT 14 PIN BRUSH TYPE FADAL LMSI **VIDEO**

HAAS SRT9 4TH AXIS ROTARY TABLE W/ MOUNT 14 PIN BRUSH TYPE FADAL LMSI **VIDEO**

  • Sun Valley, California, United States
  • Jan 30th
HAAS T5C 4TH & 5TH AXIS ROTARY TABLE 17 PIN BRUSH TYPE OR USE IT AS TRT160 LMSI

HAAS T5C 4TH & 5TH AXIS ROTARY TABLE 17 PIN BRUSH TYPE OR USE IT AS TRT160 LMSI

  • Sun Valley, California, United States
  • Jan 30th
antique Blacksmith forge post leg VISE 41" tall Spring load - straight iron -

antique Blacksmith forge post leg VISE 41" tall Spring load - straight iron -

  • Springfield, Missouri, United States
  • Jan 30th
KURT 8" MACHINIST VISE

KURT 8" MACHINIST VISE

  • Saint Clair Shores, Michigan, United States
  • Jan 30th
VINTAGE NYE TOOL WORKS PIPE VISE, SCREW TYPE, FOR WATER & STEAM PIPE FABRICATION

VINTAGE NYE TOOL WORKS PIPE VISE, SCREW TYPE, FOR WATER & STEAM PIPE FABRICATION

  • Plattsburgh, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies