+ Post new Ad
PanaVise with Vacuum Base and Wide Opening Head, US $45.00 – Picture 0
PanaVise with Vacuum Base and Wide Opening Head, US $45.00 – Picture 1
PanaVise with Vacuum Base and Wide Opening Head, US $45.00 – Picture 2
PanaVise with Vacuum Base and Wide Opening Head, US $45.00 – Picture 0
PanaVise with Vacuum Base and Wide Opening Head, US $45.00 – Picture 1
PanaVise with Vacuum Base and Wide Opening Head, US $45.00 – Picture 2

Panavise With Vacuum Base And Wide Opening Head

US $45.00

  • Auburn, California, United States
  • Mar 7th
Open on mobile:
QR code
Here is a PanaVise Vacuum base #380 with the deluxe wide opening head #376. I'm not absolutely sure of those model numbers but look at the photos. In used clean and lubricated condition. The rubber Vacuum base is worn around the edges but seems to hold tight. The head is adjustable and will adjust from  fully closed to 9 1/4 inches when you turn the angle braces around. You just unscrew them and reattach to get to each extreme. I have them turned both ways in the photos. The rubber jaw covers are reversible to use the two different textures for clamping. 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer PanaVise

Directions

Similar products from Grips & Tongs

Vintage Heavy Duty Wilton 645 Swivel Base w/anvil Machinist Bench Vise 5" jaws

Vintage Heavy Duty Wilton 645 Swivel Base w/anvil Machinist Bench Vise 5" jaws

  • West Chicago, Illinois, United States
  • Mar 7th
COLUMBIAN BENCH VISE SWIVEL BASE #D44 M2 4" USA

COLUMBIAN BENCH VISE SWIVEL BASE #D44 M2 4" USA

  • Orland Park, Illinois, United States
  • Mar 7th
Wilton MACHINIST MILL LATHE Tilting Rotating Vintage Bench Vise 4" Jaw CLEAN!

Wilton MACHINIST MILL LATHE Tilting Rotating Vintage Bench Vise 4" Jaw CLEAN!

  • Westland, Michigan, United States
  • Mar 7th
KURT D60-4 SWIVEL BASE FOR 6" ANGLOCK VISES - D60, D675, D688

KURT D60-4 SWIVEL BASE FOR 6" ANGLOCK VISES - D60, D675, D688

  • Covina, California, United States
  • Mar 7th
Old Used Tools,Littlestown 450 Swivel Anvil Vise,4-5/8" Jaws,4" Cap

Old Used Tools,Littlestown 450 Swivel Anvil Vise,4-5/8" Jaws,4" Cap

  • Thonotosassa, Florida, United States
  • Mar 7th
BROWN & SHARPE 791-3 PIN VISE

BROWN & SHARPE 791-3 PIN VISE

  • Berlin, Connecticut, United States
  • Mar 7th
BL6 Chick Doubke Milling Machine Vise

BL6 Chick Doubke Milling Machine Vise

  • Reading, Pennsylvania, United States
  • Mar 7th
MILLING MACHINE HANDLE USA 1" BORE W/ PINS BRIDGEPORT

MILLING MACHINE HANDLE USA 1" BORE W/ PINS BRIDGEPORT

  • Ellington, New York, United States
  • Mar 7th
PANAVISE 305 BASE WITH 310 SURFACE PLATE AND 304 VISE HEAD COLBERT PANA VISE

PANAVISE 305 BASE WITH 310 SURFACE PLATE AND 304 VISE HEAD COLBERT PANA VISE

  • Denver, Colorado, United States
  • Mar 7th
atlas swivel milling machine vise shaper 7b

atlas swivel milling machine vise shaper 7b

  • Royal Oak, Michigan, United States
  • Mar 7th
ROTATING MACHINE VISE OPENS TO 5.5 x 6 INCHES VERY HEAVY DUTY Our # 1 (014-035)

ROTATING MACHINE VISE OPENS TO 5.5 x 6 INCHES VERY HEAVY DUTY Our # 1 (014-035)

  • North Tonawanda, New York, United States
  • Mar 7th
Machinist Toolmaker Precision Ground Grinding-Inspection Vise Tool

Machinist Toolmaker Precision Ground Grinding-Inspection Vise Tool

  • Los Angeles, California, United States
  • Mar 6th
MACHINIST LATHE MILL Machinist 2" Drilling Milling Vise

MACHINIST LATHE MILL Machinist 2" Drilling Milling Vise

  • Morris Plains, New Jersey, United States
  • Mar 6th
VINTAGE WILTON 3.5" BULLET SWIVEL BASE BENCH JEWELER'S MACHINIST'S VISE

VINTAGE WILTON 3.5" BULLET SWIVEL BASE BENCH JEWELER'S MACHINIST'S VISE

  • Woodland Hills, California, United States
  • Mar 6th
5" HEAVY DUTY DRILL PRESS VISE

5" HEAVY DUTY DRILL PRESS VISE

  • Covina, California, United States
  • Mar 6th
Lot of Assorted Wood Vises & Clamps #255

Lot of Assorted Wood Vises & Clamps #255

  • San Antonio, Texas, United States
  • Mar 6th
Pittsburgh Bench Mount Vises #242

Pittsburgh Bench Mount Vises #242

  • San Antonio, Texas, United States
  • Mar 6th
Kurt D675 Workholding Vise

Kurt D675 Workholding Vise

  • Bangor, Pennsylvania, United States
  • Mar 6th
YANKEE NO. 992 MACHINIST DRILL PRESS VISE TOOL

YANKEE NO. 992 MACHINIST DRILL PRESS VISE TOOL

  • Voorhees, New Jersey, United States
  • Mar 6th
Kurt 3600V Workholding Vise

Kurt 3600V Workholding Vise

  • Bangor, Pennsylvania, United States
  • Mar 6th

People who viewed this item also vieved

13mm Plunger Stroke 50Kg 110 Lbs Push Pull Toggle Clamp

13mm Plunger Stroke 50Kg 110 Lbs Push Pull Toggle Clamp

  • Hong Kong, Hong Kong
  • Jan 30th
Williams No. 104, 0-4 in. heavy duty, fine thread, C-clamp

Williams No. 104, 0-4 in. heavy duty, fine thread, C-clamp

  • Cocoa, Florida, United States
  • Jan 30th
L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA USA

L S Starrett Toolmaker Machinist Parallel Clamp No. 161-AA USA

  • Phoenix, Oregon, United States
  • Jan 30th
COLLET 1/2" MC 10-50 7/8 GRID #7778

COLLET 1/2" MC 10-50 7/8 GRID #7778

  • Resaca, Georgia, United States
  • Jan 30th
rego-fix er 8 flex collet 1.5mm 1108.01500.100

rego-fix er 8 flex collet 1.5mm 1108.01500.100

  • United States
  • Jan 30th
rego-fix er 8 flex collet 2.5mm 1108.02500.102

rego-fix er 8 flex collet 2.5mm 1108.02500.102

  • United States
  • Jan 30th
Machinist Planer Jacks Lot of 6 Jacks Little Giant Type More

Machinist Planer Jacks Lot of 6 Jacks Little Giant Type More

  • Toms River, New Jersey, United States
  • Jan 30th
Brown & Sharpe 6 X 6 Magnetic Sine Plate (Perma-Sine Model 927-50)-Exc Cond(390)

Brown & Sharpe 6 X 6 Magnetic Sine Plate (Perma-Sine Model 927-50)-Exc Cond(390)

  • Marlton, New Jersey, United States
  • Jan 30th
MACHINIST , SETUP BLOCK ,1- 7/16 x 2-1/4 x 2-3/8" TOOL MAKER LATHE MACHINIST

MACHINIST , SETUP BLOCK ,1- 7/16 x 2-1/4 x 2-3/8" TOOL MAKER LATHE MACHINIST

  • Macomb, Michigan, United States
  • Jan 30th
4mt lathe dead center Oversized Carbide Tipped #4 MT Morse Taper tooling R#0151

4mt lathe dead center Oversized Carbide Tipped #4 MT Morse Taper tooling R#0151

  • Dayton, Ohio, United States
  • Feb 13th
4mt lathe dead center #4 MT Morse Taper tooling Kent summit monarch R#0152

4mt lathe dead center #4 MT Morse Taper tooling Kent summit monarch R#0152

  • Dayton, Ohio, United States
  • Feb 13th
RITEN 69102 Large Carbide Point Imperial Carbide Center #2MT

RITEN 69102 Large Carbide Point Imperial Carbide Center #2MT

  • Cincinnati, Ohio, United States
  • Feb 13th
USED JACOBS MULTI-CRAFT CHUCK MODEL DC8K61=3/8-24 THD CAP.5/64-1/2" W/ CHUCK KEY

USED JACOBS MULTI-CRAFT CHUCK MODEL DC8K61=3/8-24 THD CAP.5/64-1/2" W/ CHUCK KEY

  • Fullerton, California, United States
  • Feb 13th
USED HD YAMA 1-13 MM CHUCK JT6 VERY GOOD CONDITION

USED HD YAMA 1-13 MM CHUCK JT6 VERY GOOD CONDITION

  • Fullerton, California, United States
  • Feb 13th
NICE CUSHMAN 3 JAW 5" REVERSING SCROLL LATHE CHUCK & KEY 1 1/2 x 8 TPI

NICE CUSHMAN 3 JAW 5" REVERSING SCROLL LATHE CHUCK & KEY 1 1/2 x 8 TPI

  • United States
  • Feb 13th
HARDINGE HV-4 5C COLLET INDEX FIXTURE

HARDINGE HV-4 5C COLLET INDEX FIXTURE

  • San Diego, California, United States
  • Feb 22nd
HK Porter / Luster Jordan MFG Hand Seamer Sheet Metal Brake Bender

HK Porter / Luster Jordan MFG Hand Seamer Sheet Metal Brake Bender

  • Toms River, New Jersey, United States
  • Feb 22nd
Parallel 4" x 1" Made in USA Matching Pair |LV3|

Parallel 4" x 1" Made in USA Matching Pair |LV3|

  • Saint Louis, Missouri, United States
  • Feb 22nd
Brown & Sharpe #621 Surface Gage with Rare Adjustment

Brown & Sharpe #621 Surface Gage with Rare Adjustment

  • Hollis, New York, United States
  • Apr 26th
1 Lot of Step Blocks And Hold Down Clamps (Inv.33053)

1 Lot of Step Blocks And Hold Down Clamps (Inv.33053)

  • Portland, Connecticut, United States
  • Apr 27th
Tools V blocks clamps

Tools V blocks clamps

  • Fremont, Indiana, United States
  • Apr 27th
36" Pratt & Whitney Precision Tilting Rotary table Motorized Index DeVlieg

36" Pratt & Whitney Precision Tilting Rotary table Motorized Index DeVlieg

  • Grand Rapids, Michigan, United States
  • May 22nd
Small Rotary Table; 3 5/8" Dia; 4 T-Slots (CTAM #7561)

Small Rotary Table; 3 5/8" Dia; 4 T-Slots (CTAM #7561)

  • Sicklerville, New Jersey, United States
  • May 22nd
Milichex Model MOX-3600-5; Optical Polygon (CTAM #7552)

Milichex Model MOX-3600-5; Optical Polygon (CTAM #7552)

  • Sicklerville, New Jersey, United States
  • May 22nd
A2-5 Collet Chuck With S-15 Master Collet

A2-5 Collet Chuck With S-15 Master Collet

  • Mission Viejo, California, United States
  • Jun 24th
Bison 5824-4 Pneumatic Lathe Collet Chuck Head-Closer Indexer Rotary Chuck

Bison 5824-4 Pneumatic Lathe Collet Chuck Head-Closer Indexer Rotary Chuck

  • Plymouth, Indiana, United States
  • Jun 24th
NEW ER-16 COLLET CHUCK CNC MILL LATHE ROUTER

NEW ER-16 COLLET CHUCK CNC MILL LATHE ROUTER

  • Lancaster, Ohio, United States
  • Jun 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies