Parker Digiplan Stepping Motor Drive Pk130m Type Pkh

US $124.99

Goffstown, New Hampshire, United States
May 19th

Open on mobile:
QR code

Parker Digiplan Stepping Motor Drive PK130M Type PKH Description This product is being sold For Parts. Products are in good physical condition. Products bear minimal signs of previous wear and have been pulled from a working environment. What’s Included: 1x Parker Digiplan Stepping Motor Drive PK130M Type PKH Does not include any additional cables, parts or accessories. Product Specifications Parameter Value Type Bipolar recirculating chopper Motor resolution (user selectable) PKH65/130M: 200, 400, 1,000, or 2,000 steps/rev Protection (auto-shutdown if detected): · Short circuit · Brownout · Overtemperature Phase-to-phase and phase-to-ground If AC supply drops below 80VAC If heatsink exceeds 85°C (185°F) Nominal output current (Two-phase-on) PKH65M: 6.5A/phase PKH130M: 13A/phase (DIP switch selectable) Standby current reduction 50% of motor current Boost current 30% for a maximum of 5 seconds (internally limited) Maximum stepping frequency PKH65/130M: 100kHz @ 2,000 steps /rev Command Interface Inputs are fully optically isolated and require a TTL-type signalto operate. >3.5VDC high, <0.8VDC low. User-supplied stepand direction signals must be capable of sinking up to 20mA. Clock (Step) Low going pulse, 5 s min. width. Max. pulse rate is 100kHz Direction Logic high = CW rotation; Logic low = CCW rotation Reset (Shutdown) Logic high = normal operation; Logic low = amplifier disable Output circuits Open-collector NPN transistor Output logic levels +30V max. (off), 15mA max. (on) Input impedance 180 + isolator diode to +5V Input logic level Logic 0: ±1V or short-circuit to 0V Logic 1: +4.7V to +7V or open-circuit Power Supply voltage 100 - 480VAC with external transformer; 120VAC (±10%)without external transformer (USA only & not recommended)Supply into PKH drive is 172V max for motor, 120V for fan/logic PKH130M up to 14A PKH65M up to 7A Frequency 50/60 Hz Fuses (all slow-blow time delay) FS1, FS2, and FS3 (6.3 x 32mm) Motor supply (L1, L2, and L3): 25A (PKH130M), 12.5A(PKH65M) high breaking capacity FS4 (6.3 x 32mm) Logic/fan supply: 1A high breaking capacity FS5 (6.3 x 32mm) Logic/fan supply: 1A high breaking capacity FS6 (6.3 x 32mm) Power dump: 2A Environmental Constraints Drive operating conditions 0° - 40°C (32° - 104°F). Max. heatsink temp. is 85°C (185°F) Storage -40° - 85°C (-40° - 185°F) Humidity 0% - 95% (non-condensing) Motor Compatibility Type 2-Phase hybrid or permanent magnet (normally 1.8°) Number of Leads 4, 6, or 8 (5 lead not suitable)v Minimum inductance 0.75 mH (PKH130M), 1.5 mH (PKH65M) Payment Payment via PayPal is expected within 2-days after the winning bid.We only accept bids from US bidders with confirmed PayPal addresses and only accept PayPal as the form of payment. Returns Returns are not accepted for items listed as For Parts/Not Working Please review all photos carefully as they are part of the description per eBay policy. Shipping ARG-Tech directly only ships to the United States. All international shipments are processed through eBay's Global Shipping Program. We take pride in packing items carefully to ensure safe arrival. We ship promptly, usually same or next day after PayPal confirmation. We offer combined shipping for customers who purchase more than one item from us at a time. If two items cannot be safely packaged together we reserve the right to ship them separately. If you have any special requirements or questions regarding shipping, please contact us before buying. Our business hours are Monday – Friday 7AM-4:30PM EST Thanks for viewing! Please check out our other items!

“This product is being sold For Parts. Products are in good physical condition. Products bear minimal signs of previous wear and have been pulled from a working environment.”

Model

PKH

Brand

Parker

Custom Bundle

Run Method

Bipolar

MPN

PKH130M