US $34.75
| Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
| Seller Notes | “See photos” |
Directions
Similar products from Fast Change Tools
Parlec Numertap 770 Tap Adapter 3" Extension for 9/16" Hand Tap 7716CG-3-056
Parlec Numertap 770 Tap Adapter for 1/2" NPT Hand Tap 7717CG-050
Parlec Numertap 770 Tap Adapter for 13/16" Hand Tap 7716CG-081
Parlec Numertap 770 Tap Adapter for 7/8" Hand Tap 7716CG-087
Lot of 7 ea. Parlec Numertap 770 Extended Tap Adapters
Parlec Numertap 770 Tap Adapter 6" Extension for "1-1/16 & 1-1/8" Hand Tap
Parlec Numertap 770 Tap Adapter 6" Extension for #10 Hand Tap 7716CG-6-#10
Parlec Numertap 770 Tap Adapter 6" Extension for 1-3/16 & 1-1/4" Hand Tap
Parlec Numertap 770 Tap Adapter 6" Extension for 1/2" Hand Tap 7716CG-6-050
Parlec Numertap 770 Tap Adapter 6" Extension for 3/4" Hand Tap 7716CG-6-075
Parlec Numertap 770 Tap Adapter 6" Extension for 5/8" Hand Tap 7716CG-6-062
Parlec Numertap 770 Tap Adapter 6" Extension for 7/8" Hand Tap 7716CG-6-087
Parlec Numertap 770 Tap Adapter 6" Extension for 9/16" Hand Tap 7716CG-6-056
Parlec Numertap 770 Tap Adapter 6" Extension for5/16 " Hand Tap 7716CG-6-031
PISTON TYPE CXA QUICK CHANGE TOOL SET-SWING 13"-18" A976
USED FALCON KWIKLOK 1.00" SHELL MILL ARBOR TISA 6-20
USED FALCON KWIKLOK TIJDA 6-3 With JACOB 14N 0-1/2 Ball Brg Super Chuck
USED FALCON KWIKLOK TISA 6-16 With SANDVIK RA 265.2-075x
USED FALCON KWIKLOK TISA 6-24 With SANDVIK COROMAT RA 265.2-100m
Royal 4-way Tool Post (Inv.15408)
People who viewed this item also vieved
PARLEC CAT 40 TG100 COLLET CHUCK C40-10SC5 STK 1964
X-tra Long Tool Holder Set with CAT 40 Holder 3/8 and 1/2" Tooling
Vintage Williams No. 9 Tool Holder
Sandvik CoroTurn SL, A570-2CD2411-40, A570-2C D24 11-40 Cylandrical Adaptor
MCSNR2020K12 Indexable turning tool holder 45 Degree for CNC Lathe Milling
KENNAMETAL 1.25" SHANK DDJNL 205D TURNING TOOL DNMG-543
Precision Shell End Mill Arbor - Arbor Diameter: 1-1/4'
Morse Taper End Mill Adapter & Set, Hole Diameter: 3/16' to 5/8'
MORSE TAPERLOCK BUSHING SERIES 1610 1-1/4" BORE
TSUBAKI FINISHED BORE SPROCKET 50B18F 1-7/16" BORE
Armstrong No.T- 2-L Lathe Bit Tool-Holder Machinist
ZLIVECENTER BT50 ER25 MILLING COLLET CHUCK HOLDER PROJ. 5.91" BAL 12,000RPM
Kennametal KM 40 23mm Drill .9055" KM40DTF230R2M
Kennametal KM 32 Fine Adjust Boring Head Range .945"-1.221"
MACHINIST TOOLS * JACOBS CHUCK * 33-34 * 1/2 CAP * 33 TAPER
MACHINIST TOOLS * DRILL CHUCK * JACOBS SUPER CHUCK 11N * CAP 3/8
LARGE EXPANDING LATHE OR GRINDING MANDREL No. 9, 2-1/8"- 2-1/2"
HARDINGE 5C EXPANDING MANDREL HOLDER #400 LOC2464
Nema 34 2phase 3.5N.m 496ozf.in stepper Motor 86mm frame 9.5mm shaft 86J1865-828
Nema 23 2phase 2N.m 283ozf.in stepper Motor 57mm frame 8mm shaft 57J1880-830
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies