US $29.95
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “See photos” |
Directions
Similar products from Fast Change Tools
Parlec Numertap 700 6" Extension Tap Adapter 7711-6-031 For 5/16", M7 & M8 Hand
Parlec Numertap 700 6" Extension Tap Adapter 7711-6-037 For 3/8" Hand Tap
Parlec Numertap 700 6" Extension Tap Adapter 7711-6-050 For 1/2" Hand Tap
Parlec Numertap 700 6" Extension Tap Adapter 7714-6-025 For 1/4" NPT Hand Tap
Parlec Numertap 770 Tap Adapter for 1/2" Hand Tap 7716CG-050
Parlec Numertap 770 Tap Adapter for 3/8" Hand Tap 7716CG-037
Parlec Numertap 770 Tap Adapter for 3/8" NPT Hand Tap 7717CG-037
Parlec Numertap 770 Tap Adapter for 5/16" Hand Tap 7716QRCG-031
Parlec Numertap 770 Tap Adapter for 9/16" Hand Tap 7716CG-056
Parlec Numertap 770 Tap Adapter 3" Extension for 1/16" NPT Hand Tap 7717CG-3-006
Parlec Numertap 770 Tap Adapter 3" Extension for 1/4" Hand Tap 7716CG-3-025
Parlec Numertap 770 Tap Adapter 3" Extension for 3/4" Hand Tap 7716CG-3-075
Parlec Numertap 770 Tap Adapter 3" Extension for 3/8" Hand Tap 7716CG-3-037
Parlec Numertap 770 Tap Adapter 3" Extension for 5/16" Hand Tap 7716CG-3-031
Parlec Numertap 770 Tap Adapter 3" Extension for 5/8" Hand Tap 7716CG-3-062
Parlec Numertap 770 Tap Adapter 3" Extension for 7/16" Hand Tap 7716CG-3-043
Parlec Numertap 770 Tap Adapter 3" Extension for 7/8" Hand Tap 7716CG-3-087
Parlec Numertap 770 Tap Adapter 3" Extension for 9/16" Hand Tap 7716CG-3-056
Parlec Numertap 770 Tap Adapter for 1/2" NPT Hand Tap 7717CG-050
Parlec Numertap 770 Tap Adapter for 13/16" Hand Tap 7716CG-081
People who viewed this item also vieved
PARLEC (?) CAT40 1/2" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12390
PARLEC (?) CAT40 1/2" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12388
SANDVIK Coroturn 107 A10R-SVUBR 2-EB1 8" X 5/8" Boring Bar Loc: J 2-3
KENNAMETAL STEEL BORING HEAD FOR CARBIDE BARS #12-CSKNR-4
4 Fine Indexable Inserts Carbide TNMA 323C Grade C2
Valenite TPEW-322-PDJR inserts,30 pcs.
5/8-18 ARBOR SCREW FOR 1-1/4 INCH SHELL END MILL HOLDER (3900-0770)
Jacobs Straight Shank Arbor A4003
SOUTH BEND 9" 10K METAL LATHE IDLER CHANGE GEAR BOLT BUSHING ASSY
BROWNING SPLIT TAPER BUSHING Q1 1-5/8" BORE
Lot of Four NIkken BT40 Tool Holders Lyndex, Others 1/2 Inch (Inv.35587)
Lot of Four NIkken BT40 Tool Holders BT40-WE1/2-65 (Inv.35586)
New EZ-SET BUCA BH-41 Carbide inserts Indexable Valenite Boring HEAD Bar Parts
DORIAN 73310150364 Turning Toolholder, DNMG, MDJNR24-5E, RH
Drill Chucks Lathe Jacobs, Snap-On, Almond
Sunnen Complete Mandrel AK20-806 : S806 Sleeve, AK20-A Adapter, UB-B Shoe, Stone
Sunnen Complete Mandrel AK20-838 : S838 Sleeve, AK20-A Adapter, UB-B Shoe, Stone
Nema 34 2phase 8.5N.m 1204ozf.in stepperMotor 86mm frame 12.7mm 86J18118-842
Nema 34 2phase 6.0N.m 850ozf.in stepperMotor 86mm frame12.7mm shaft 86J18101-450
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies