Pepperl + Fuchs ModBus Gateway KSD2-GW-MOD.485, US $400.00 – Picture 0

Pepperl + Fuchs ModBus Gateway KSD2-GW-MOD.485, US $400.00 – Picture 1

Pepperl + Fuchs Modbus Gateway Ksd2-gw-mod.485

US $400.00

New Plymouth, New Zealand
Jun 9th

Open on mobile:
QR code

MODBUS gateway KSD2-GW-MOD.485 Connects the Remote Process Interface to the control system/PLC/PC via MODBUS Couples the internal CAN bus to the external MODBUS Device installation in Zone 2 Master function for the internal CAN bus External bus: MODBUS profile RTU (Remote Terminal Unit) External baud rate up to 57.6 KBd Standard interface RS 485 Separate service connection independent of the PCS or PLC through RS 485 interface in addition to MODBUS connection 24 V DC supply voltage Redundant gateway possible EMC acc. to NAMUR NE 21 Supply Connection Power Rail Rated voltage 20 ... 30 V DC Ripple < 10 % Power consumption 2.4 W Internal bus Connection Power Rail Interface CAN protocol via Power Rail bus with up to 125 units Cycle time 1 device 25 ms 125 devices with discrete input 60 ms 125 devices with discrete output 90 ms 125 devices with analog input 75 ms 125 devices with analog output 110 ms External bus Connection terminals 10, 11, 12; 16, 17, 18 Interface MODBUS profile RTU, RS-485 interface Service interface Connection terminals 7, 8, 9 Interface RS-485 Redundancy Option through the use of a second gateway Electrical isolation Internal/external bus basic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC Internal bus/power supply not available External bus/power supply basic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC Service interface/internal bus basic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC Service interface/external bus basic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC Service interface/supply basic insulation acc. to EN 50178:1997, rated insulation voltage 50 Veff AC Directive conformity Electromagnetic compatibility Directive 2004/108/EC EN 61326-1:2006 Explosion protection Directive 94/9/EC EN 60079-15:2005 Conformity Electrical isolation EN 50178:1997 Electromagnetic compatibility NE 21:2006 Degree of protection IEC 60529 Ambient conditions Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Damaging gas acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Degree of protection IP20 Connection terminal connection

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Pepperl Fuchs
MPN	48123
Model	KSD2-GW-MOD.485
Country/Region of Manufacture	Germany