+ Post new Ad
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 0
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 1
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 2
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 3
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 4
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 5
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 6
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 7
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 8
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 9
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 0
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 1
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 2
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 3
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 4
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 5
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 6
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 7
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 8
PERSKE Spindle Router Motor, 1 HP, WITH BENSHAW VFD, US $550.00 – Picture 9

Perske Spindle Router Motor, 1 Hp, With Benshaw Vfd

US $550.00

  • Canton, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
FOR SALE A 1 HP PERSKE AIR COOLED SPINDLE ROUTER MOTOR. BENSHAW  220 VOLT SINGLE PHASE INPUT VFD  HOOKED UP TO MOTOR 7' STEEL CABLE. OWNERS MANUAL FOR VFD 1/8" , 1/4" , 5/16" COLLETS , NUT , NUT WRENCH. SPINDLE HAS FLAT BACK WITH 4 TAPPED HOLES FOR EASY MOUNTING . VFD IS A 220 VOLT SINGLE PHASE INPUT ,CAN BE CONTROLLED FROM COMPUTER IF HOOKED UP OR PANEL ON UNIT . BOTH UNITS  REMOVED FROM A WORKING CNC ROUTER WITH ABOUT 35 HOURS OF RUN TIME WITH NO PROBLEMS  . ASK QUESTIONS BEFORE BIDING 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand PERSKE , BENSHAW

Directions

Similar products from Professional Router Machines

Techniks CAT 40 ER 32-4.0" 25K RPM @ G2.5 Balanced CNC Collet Chuck-.0001" TIR

Techniks CAT 40 ER 32-4.0" 25K RPM @ G2.5 Balanced CNC Collet Chuck-.0001" TIR

  • Hamden, Connecticut, United States
  • Jan 30th
Techniks CAT 40 ER 32-4.00" 25K CNC Collet Chuck+Wrench

Techniks CAT 40 ER 32-4.00" 25K CNC Collet Chuck+Wrench

  • Hamden, Connecticut, United States
  • Jan 30th
20 Pc. Techniks CAT 40 ER 32-4.00" CNC Collet Chuck Kit

20 Pc. Techniks CAT 40 ER 32-4.00" CNC Collet Chuck Kit

  • Hamden, Connecticut, United States
  • Jan 30th
3 Pc. Techniks CAT 40 ER 32-4.00" 25K CNC Collet Chucks

3 Pc. Techniks CAT 40 ER 32-4.00" 25K CNC Collet Chucks

  • Hamden, Connecticut, United States
  • Jan 30th
22 Pc. Techniks CAT 40 ER 32-4.0" CNC Collet Chucks Kit

22 Pc. Techniks CAT 40 ER 32-4.0" CNC Collet Chucks Kit

  • Hamden, Connecticut, United States
  • Jan 30th
6 Pc. Techniks CAT 40 ER 32 25K RPM CNC Collet Chucks

6 Pc. Techniks CAT 40 ER 32 25K RPM CNC Collet Chucks

  • Hamden, Connecticut, United States
  • Jan 30th
25 Pc. Techniks CAT 40 ER 32 25K RPM Balanced CNC Collet Chucks Kit

25 Pc. Techniks CAT 40 ER 32 25K RPM Balanced CNC Collet Chucks Kit

  • Hamden, Connecticut, United States
  • Jan 30th
25 Pc. Techniks CAT 40 ER 32 CNC 25K Chucks Kit-Coolant

25 Pc. Techniks CAT 40 ER 32 CNC 25K Chucks Kit-Coolant

  • Hamden, Connecticut, United States
  • Jan 30th
Techniks BT 30 ER 25 x 70mm 25K RPM Balanced Collet Chuck for CNC Routers

Techniks BT 30 ER 25 x 70mm 25K RPM Balanced Collet Chuck for CNC Routers

  • Hamden, Connecticut, United States
  • Jan 30th
Tower with bell 3d STL file by miccot set 2pcs full 3D and relief

Tower with bell 3d STL file by miccot set 2pcs full 3D and relief

  • Nikolae, Ukraine
  • Jan 30th
Carvewright CNC Machine

Carvewright CNC Machine

  • Houlton, Maine, United States
  • Jan 30th
Carvewright CNC Machine Ver C

Carvewright CNC Machine Ver C

  • Houlton, Maine, United States
  • Jan 30th
BOSCH 1604 19054 ROUTER FIXED BASE 1/4" COLLET 115V 10.5A 25000 RPM USA MADE

BOSCH 1604 19054 ROUTER FIXED BASE 1/4" COLLET 115V 10.5A 25000 RPM USA MADE

  • Las Vegas, Nevada, United States
  • Jan 30th
2 replacement BEARING LEAD SCREWS 19.75" LONG .374 21W

2 replacement BEARING LEAD SCREWS 19.75" LONG .374 21W

  • Fountain Valley, California, United States
  • Jan 30th
2 BEARING LEAD SCREWS 15" LONG with block 21C2

2 BEARING LEAD SCREWS 15" LONG with block 21C2

  • Fountain Valley, California, United States
  • Jan 30th
Vintage Large Wood Shaper 4" High 4" Diameter Fits a 1 1/4" Shaft... No. 40430

Vintage Large Wood Shaper 4" High 4" Diameter Fits a 1 1/4" Shaft... No. 40430

  • Follansbee, West Virginia, United States
  • Jan 30th
MultiCam 60x60 CNC Router M-202 Colombo Spindle T-Slot Table 1 or 3 phase power

MultiCam 60x60 CNC Router M-202 Colombo Spindle T-Slot Table 1 or 3 phase power

  • Rocklin, California, United States
  • Jan 30th
Techniks ISO 20 ER 20 40K RPM Balanced Collet Chuck w/Pull Stud-CNC Routers

Techniks ISO 20 ER 20 40K RPM Balanced Collet Chuck w/Pull Stud-CNC Routers

  • Hamden, Connecticut, United States
  • Jan 30th
1216 CNC 3d Relief Model STL for Router Engraver Mill Woodworking 3D printer

1216 CNC 3d Relief Model STL for Router Engraver Mill Woodworking 3D printer

  • United States
  • Jan 30th
CNC Router, Stinger, CAMaster

CNC Router, Stinger, CAMaster

  • Freeport, New York, United States
  • Jan 30th

People who viewed this item also vieved

Westinghouse - Three Phase Motor starter 5HP Life Line Starter

Westinghouse - Three Phase Motor starter 5HP Life Line Starter

  • Kimberly, Wisconsin, United States
  • May 29th
JET JTAS-10XL50-1DX 10" Deluxe Xacta Table Saw + 50" Xacta Fence II 708675PK

JET JTAS-10XL50-1DX 10" Deluxe Xacta Table Saw + 50" Xacta Fence II 708675PK

  • Circleville, Ohio, United States
  • May 29th
Danfuss Pneumatic Table Saw - 16 inch

Danfuss Pneumatic Table Saw - 16 inch

  • Columbus, Ohio, United States
  • May 29th
JET Benchtop Drill Press - 16 Speed, 3/4 HP, #J-2530

JET Benchtop Drill Press - 16 Speed, 3/4 HP, #J-2530

  • Fort Mill, South Carolina, United States
  • May 30th
17-881 - Delta Or Rockwell #2 Morse Taper Spindle With Bearings

17-881 - Delta Or Rockwell #2 Morse Taper Spindle With Bearings

  • Holly, Michigan, United States
  • May 30th
JET J-A2608-2 220V 3Ph 20-inch Arboga Gear Head Drill Press New

JET J-A2608-2 220V 3Ph 20-inch Arboga Gear Head Drill Press New

  • Ferndale, Washington, United States
  • May 30th
10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-400RP 400 Grit

10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-400RP 400 Grit

  • Tampa, Florida, United States
  • May 31st
10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-320RP 320 Grit

10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-320RP 320 Grit

  • Tampa, Florida, United States
  • May 31st
10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-150RP 150 Grit

10 Pk Mirka Abranet 5 in Grip Mesh Dust Free Sanding Disc 9A-232-150RP 150 Grit

  • Tampa, Florida, United States
  • May 31st
Kreg Rip Cut, Jig R3, Shelf Pin Jig, KHC-LARGE Face Clamp, Screw Wheel, and DVD

Kreg Rip Cut, Jig R3, Shelf Pin Jig, KHC-LARGE Face Clamp, Screw Wheel, and DVD

  • Ferndale, Washington, United States
  • Jun 13th
Kreg Jig K4 Pocket Hole System, KHC-LARGE Face Clamp, Screw Selector Wheel

Kreg Jig K4 Pocket Hole System, KHC-LARGE Face Clamp, Screw Selector Wheel

  • Ferndale, Washington, United States
  • Jun 13th
Kreg Jig K4 Pocket Hole System, (2) KHC-LARGE Face Clamps, Screw Selector

Kreg Jig K4 Pocket Hole System, (2) KHC-LARGE Face Clamps, Screw Selector

  • Ferndale, Washington, United States
  • Jun 13th
Wood Lathe Flip Up Wire Cage Work Safety Guard with Glass Panel Shielding

Wood Lathe Flip Up Wire Cage Work Safety Guard with Glass Panel Shielding

  • Woodstock, New York, United States
  • Oct 22nd
Oliver 20 Pattern makers wood lathe, 24" swing x 108" useable length

Oliver 20 Pattern makers wood lathe, 24" swing x 108" useable length

  • Evergreen, Colorado, United States
  • Oct 22nd
Antique 1930 - 1940 Mounted Cast Iron Frame Dunlap Lathe With Gauges and Books

Antique 1930 - 1940 Mounted Cast Iron Frame Dunlap Lathe With Gauges and Books

  • Clayton, Delaware, United States
  • Oct 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies