+ Post new Ad
Pexto, Stake set w/ plate & 10 anvils: Tinsmith, Blacksmith, Forge, Sheet Metal, US $1,400.00 – Picture 0
Pexto, Stake set w/ plate & 10 anvils: Tinsmith, Blacksmith, Forge, Sheet Metal, US $1,400.00 – Picture 0

Pexto, Stake Set W/ Plate & 10 Anvils: Tinsmith, Blacksmith, Forge, Sheet Metal

US $1,400.00

  • Santa Cruz, California, United States
  • Jan 30th
Open on mobile:
QR code
Pexto Forming Stake Set Take a close look at this Fabulous set of Peck Stow and Wesbster  (Pexto) forming stakes complete with the holding plate that is usually set into a work table.  There are 10 of these forming stakes included with the plate. Several of the stakes are clearly stamped Pexto, the blue handle one is another American made stake and the others unstamped. All of the set have seen use but not abused. There is light surface rust on many with some pitting on a couple. All the parts would clean up to be in tip top shape and all are very usuable right now. There is approximately 500 lbs of metal here, so shipping is a bit ridiculous. Please plan on coming to Santa Cruz California to pick up this set. (Then you can spend the rest of the day at the Boardwalk or at the beach.) They will easily fit into the trunk of a car, it fit in mine. Call if you want any further details.      Eight three one two four six,   zero nine four five. thanks for looking No Shipping charges, you must come and pick them up. Foreign  buyers will probably pass on this great item. California residents must add 7.50% sales tax. Cash is the preferred option for local pick-up. Satisfaction guaranteed or full purchase refund if returned within 14 days of receipt. Good luck. Pay me securely with any major credit card through PayPal! Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Used”

Directions

Similar products from Fittings & Plates

Machinists 12/5B BUY NOW USA Dual Position Wheel Dresser

Machinists 12/5B BUY NOW USA Dual Position Wheel Dresser

  • Lutz, Florida, United States
  • Jan 30th
(2) ENCO 6" SINE BAR / PLATES, 6" x 1" x 1"

(2) ENCO 6" SINE BAR / PLATES, 6" x 1" x 1"

  • Bremen, Indiana, United States
  • Jan 30th
slide dovetail type rouse usa 5/8x4x81/2 top 1 1/2x3 1/2 x7 1/2 bottom

slide dovetail type rouse usa 5/8x4x81/2 top 1 1/2x3 1/2 x7 1/2 bottom

  • Plantsville, Connecticut, United States
  • Jan 30th
face plate 7 1/2 od with 1.500-6 threads with drive belt hub

face plate 7 1/2 od with 1.500-6 threads with drive belt hub

  • Plantsville, Connecticut, United States
  • Jan 30th
TTC Webbed End Slotted Angle Plate - DIMENSIONS (Inch): 6" x 5" x 4-1/2"

TTC Webbed End Slotted Angle Plate - DIMENSIONS (Inch): 6" x 5" x 4-1/2"

  • Flushing, New York, United States
  • Jan 30th
Crimping Press quick release tool holder or Die Holder

Crimping Press quick release tool holder or Die Holder

  • Del Rio, Texas, United States
  • Jan 30th
Crimping Press quick release tool holder or Die Holder base

Crimping Press quick release tool holder or Die Holder base

  • Del Rio, Texas, United States
  • Jan 30th
FIXTURE HARDENED/PRECISION GROUND STEEL 90 DEGREE FOR MILLING AND GRIDING

FIXTURE HARDENED/PRECISION GROUND STEEL 90 DEGREE FOR MILLING AND GRIDING

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Crimping Press double quick release tool holder or Die Holder

Crimping Press double quick release tool holder or Die Holder

  • Del Rio, Texas, United States
  • Jan 30th
Crimping Press quick release tool holder or Die Holder w adjustable top

Crimping Press quick release tool holder or Die Holder w adjustable top

  • Del Rio, Texas, United States
  • Jan 30th
NICE! SIMCO MICRO-GRIND 5C COLLET INDEXING FIXTURE FOR MILLING GRINDING - SV

NICE! SIMCO MICRO-GRIND 5C COLLET INDEXING FIXTURE FOR MILLING GRINDING - SV

  • Chino, California, United States
  • Jan 30th
SALE Sine Plate 5" x 3.500" Wide 1/4-20 hole pattern Machinist Model Tool Maker

SALE Sine Plate 5" x 3.500" Wide 1/4-20 hole pattern Machinist Model Tool Maker

  • Brockport, New York, United States
  • Jan 30th
Steel Parallel Set Journeyman 5" 12pc 1.500" to .500" height Apprentice Tools

Steel Parallel Set Journeyman 5" 12pc 1.500" to .500" height Apprentice Tools

  • Brockport, New York, United States
  • Jan 30th
SPI, 98-430-3 Wavy Parallel Set, Machinist / Toolmaker Tools, Swiss Made

SPI, 98-430-3 Wavy Parallel Set, Machinist / Toolmaker Tools, Swiss Made

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Eclipse Adaptor Plate Model# APS - 612

Eclipse Adaptor Plate Model# APS - 612

  • Langley, BC, Canada
  • Jan 30th
Angle Plate 4 1/4 x 3 1/2 x 2 5/8

Angle Plate 4 1/4 x 3 1/2 x 2 5/8

  • Norwalk, California, United States
  • Jan 30th
MACHINIST LATHE MILL Large 8 1/2" Lathe Face Plate 1 1/2" Bore for South Bend

MACHINIST LATHE MILL Large 8 1/2" Lathe Face Plate 1 1/2" Bore for South Bend

  • Morris Plains, New Jersey, United States
  • Jan 30th
SWEET Angle Plate 6 X 6 X 8

SWEET Angle Plate 6 X 6 X 8

  • Norwalk, California, United States
  • Jan 30th
SWEET Angle Plate 6 X 6 1/4 X 8 1/4

SWEET Angle Plate 6 X 6 1/4 X 8 1/4

  • Norwalk, California, United States
  • Jan 30th
Lot of 2 Northwestern #52417 T-Slot Bolts 1/2-13 Thread USA

Lot of 2 Northwestern #52417 T-Slot Bolts 1/2-13 Thread USA

  • Crystal Lake, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

Craftsman Ball Bearing 60 Degree Center 21132 No.2 M.T.

Craftsman Ball Bearing 60 Degree Center 21132 No.2 M.T.

  • Warwick, Rhode Island, United States
  • Jun 3rd
Riten Econo live centers New Live Center MT# 4 USA

Riten Econo live centers New Live Center MT# 4 USA

  • Carrollton, Ohio, United States
  • Jun 3rd
HARDINGE?? TOOL LATHE CENTER GAUGE

HARDINGE?? TOOL LATHE CENTER GAUGE

  • Lompoc, California, United States
  • Jun 3rd
10 JACOBS 500 SERIES COLLET SET + CASE JACOBS RUBBERFLEX COLLETS,MACHINIST TOOLS

10 JACOBS 500 SERIES COLLET SET + CASE JACOBS RUBBERFLEX COLLETS,MACHINIST TOOLS

  • Albuquerque, New Mexico, United States
  • Jun 5th
Machinist collets

Machinist collets

  • Wheatfield, Indiana, United States
  • Jun 5th
9/16” 5C Collet, Excellent Condition

9/16” 5C Collet, Excellent Condition

  • Salinas, California, United States
  • Jun 5th
MACHINIST TOOLS * SOFT JAWS * TG6158A * TONGUE & GROOVE POINTED

MACHINIST TOOLS * SOFT JAWS * TG6158A * TONGUE & GROOVE POINTED

  • Camarillo, California, United States
  • Jun 6th
NEW ITW / WOODWORTH QCS TOOL SYSTEMS QCS501250ID

NEW ITW / WOODWORTH QCS TOOL SYSTEMS QCS501250ID

  • Utica, Michigan, United States
  • Jun 6th
MACHINIST TOOLS * KEYLESS DRILL CHUCK * CUSHMAN * 1/2 SS X 2JT * CAP 3/8

MACHINIST TOOLS * KEYLESS DRILL CHUCK * CUSHMAN * 1/2 SS X 2JT * CAP 3/8

  • Camarillo, California, United States
  • Jun 6th
MACHINIST PARALLEL CLAMPS

MACHINIST PARALLEL CLAMPS

  • Hatboro, Pennsylvania, United States
  • Jun 6th
MACHINIST PARALLEL CLAMPS MADE IN JAPAN

MACHINIST PARALLEL CLAMPS MADE IN JAPAN

  • Hatboro, Pennsylvania, United States
  • Jun 6th
Armstrong C-Clamp #104 & #2 Drop Forged - Made in U.S.A. 4 INCH

Armstrong C-Clamp #104 & #2 Drop Forged - Made in U.S.A. 4 INCH

  • Orland Park, Illinois, United States
  • Jun 6th
IRWIN VISE-GRIPS SET 7R + 6LN Locking Clamp Pliers

IRWIN VISE-GRIPS SET 7R + 6LN Locking Clamp Pliers

  • Coram, New York, United States
  • Jun 7th
CRAFTSMAN VISE-GRIPS No.945341 Locking Clamp Pliers Made in U.S.A.

CRAFTSMAN VISE-GRIPS No.945341 Locking Clamp Pliers Made in U.S.A.

  • Coram, New York, United States
  • Jun 7th
NICE WILTON 9300 MACHINIST BULLET VISE 3 INCH JAWS (FREE SHIPPING TO U.S.)

NICE WILTON 9300 MACHINIST BULLET VISE 3 INCH JAWS (FREE SHIPPING TO U.S.)

  • Portland, Oregon, United States
  • Jun 7th
"Your Next Stamp Clear Stamps 4""X6""-Oh, Deer"

"Your Next Stamp Clear Stamps 4""X6""-Oh, Deer"

  • Hickory Hills, Illinois, United States
  • Jun 21st
Distress Stain 1oz-Broken China

Distress Stain 1oz-Broken China

  • Hickory Hills, Illinois, United States
  • Jun 21st
Stampendous Dies-Winter

Stampendous Dies-Winter

  • Hickory Hills, Illinois, United States
  • Jun 21st
Starrett 568 V-Block And Clamp

Starrett 568 V-Block And Clamp

  • North Royalton, Ohio, United States
  • Jun 22nd
Suburban 4" x 3" x 3" Precision Angle Block

Suburban 4" x 3" x 3" Precision Angle Block

  • Glasgow, Kentucky, United States
  • Jun 22nd
1/4" Parrallel Set

1/4" Parrallel Set

  • Glasgow, Kentucky, United States
  • Jun 22nd
Rotary Table; Palmgren 8"; (CTAM #470)

Rotary Table; Palmgren 8"; (CTAM #470)

  • Sicklerville, New Jersey, United States
  • Oct 27th
Yuasa 10" Tilting Rotary Machining Table

Yuasa 10" Tilting Rotary Machining Table

  • Rochester, New York, United States
  • Oct 27th
Jacobs Spindle Nose Lathe Chuck 91-C6

Jacobs Spindle Nose Lathe Chuck 91-C6

  • Oregon, Ohio, United States
  • Oct 27th
Mathey MSA pipe beveler 4" beveling machine with torch bracket

Mathey MSA pipe beveler 4" beveling machine with torch bracket

  • Camano Island, Washington, United States
  • Oct 31st
Horizantal/Vertical Super Spacer

Horizantal/Vertical Super Spacer

  • Mount Clemens, Michigan, United States
  • Nov 1st
METAL IN MOTION WAYCOVER 5948 EXPANDING STEEL MACHINE COVER

METAL IN MOTION WAYCOVER 5948 EXPANDING STEEL MACHINE COVER

  • Sunman, Indiana, United States
  • Nov 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies