Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 0

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 1

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 2

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 3

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 4

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 5

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 6

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 7

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 8

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 9

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 10

Pfeiffer Balzers TPH-330 Turbo Pump (Turbomolecular), US $1,749.99 – Picture 11

Pfeiffer Balzers Tph-330 Turbo Pump (turbomolecular)

US $1,749.99

Phoenix, Arizona, United States
Jan 30th

Open on mobile:
QR code

Click Here. Double your traffic. Get Vendio Gallery - Now FREE! Pfeiffer Balzers TPH-330 Turbomolecular Pump Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Pfeiffer Balzers and may vary slightly due to upgrades, options, or revisions this unit may or may not have. 2 units available, only 1 sold in the auction. These units were pulled out of a Finnigan ICP/MS system that we scrapped due to contractual obligations. The rotors spin freely and the unit is extremely clean inside. This unit may not be setup currently for corrosive gas, but there is a conversion kit I believe for it. There is also a conversion kit to make it air-cooled from the factory (not sure if the fans on the bottom will cool it sufficiently without water). The Unit's Serial Number Tag Reads: Type: TPH 330 Serial Number: PM P01 230 / N1986 Pumping Speed: 330 l/sec Oil Filling: 2 x 10 cm3 Weight: 19 kg - does not include packaging Key Features: Inlet Flange DN100 ISO-K Pumping Speed of 330 l/sec 110/240V, 50/60 Hz Advantages: Sealing gas system to protect the bearings Corrosion-resistant surface finishes High volume flow rate High gas throughput Continuous operation, even in the high pressure range Suitable for cleanroom technology High-compression pressure stages Safe against ingress of air Quiet running and little vibration Small dimensions and favorable power/weight ratio Reliable operation, thanks to the large operating medium volume Interval for changing the operating medium: 5000 operating hours Low coolant consumption Easy to service Applications: HV and UHV handling systems Semiconductor technology using etching and CVD processes Sputtering and coating technology Analysis technology involving aggressive and corrosive media Window and spectacle glass coating Ion implantation Gas throughput systems Gas analysis technology Research and Development Specifications: Description: Turbomolecular pump with DN 100 ISO-K Standard Control Type: TCP 380 (Can also use TCP 600) Connection Diameter: Inlet: DN 100 ISO-K Outlet: DN 25 ISO-KF Volume Flow Rate: Nitrogen (N2): 300 l/s Helium (He): 370 l/s Hydrogen (H2): 330 l/s Compression Ratio: Nitrogen (N2): 108 Helium (He): 3 x 104 Hydrogen (H2): 1.7 x 103 Recommended Backing Pump, Min: 16 m3/h Theoretical Ultimate Pressure: 10-11 mbar Ultimate Pressure 1: < 1 x 10-10 mbar Ultimate Pressure 2: < 1 x 10-9 mbar Ultimate Pressure 3: < 1 x 10-8 mbar Rated Speed: 60,000 1/min Standby Speed: 40,000 1/min Run-up Time 3): 3 minutes minimum. Pump Fluid: Filing Capacity: 2 x 103 cm Type: TL 011 Type of Cooling: Water Cooling Water Requirement: 15 l/h Power Input of Heater: 180 W (no jacket included) Weight: 19 kg - does not include shipping For More Pictures Please Click the Following: Picture 2 - Side View #1 Picture 3 - Side View #2 Picture 4 - Side View #3 Picture 5 - Side View #4 Picture 6 - Inlet, Inside w/Inlet Screen Picture 7 - Inlet, Inside - Rotoer View #1 Picture 8 - Inlet, Inside - Roter View #2 Picture 9 - Inlet, Inside - Roter View #3 Picture 10 - Outlet Connection Picture 11 - Purge Connection? Picture 12 - Controller Connection Picture 13 - Fan Power Connection Picture 14 - Serial Number Tag For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $50.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I need to know the following information: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? If you have any questions please call Michael at 1-866-MHZ-ELEC (1-866-649-3532) Toll Free. Also, please click here to view or other auctions! 06/30/05 Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition

Used :

An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.

Seller Notes

“2 units available, only 1 sold in the auction. These units were pulled out of a Finnigan ICP/MS system that we scrapped due to contractual obligations. The rotors spin freely and the unit is extremely clean inside. This unit may not be setup currently for corrosive gas, but there is a conversion kit I believe for it. There is also a conversion kit to make it air-cooled from the factory (not sure if the fans on the bottom will cool it sufficiently without water).”