+ Post new Ad
PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL, US $910 – Picture 0
PHASE II 5C (225-205) COLLET INDEXER, HORIZONTAL/VERTICAL, US $910 – Picture 0

Phase Ii 5c (225-205) Collet Indexer, Horizontal/vertical

US $910

  • Toms River, New Jersey, United States
  • Nov 18th
Open on mobile:
QR code
WORKS FINE COMES WITH EVERYTHING SHOWN CAME FROM A RECENTLY CLOSED SHOP Check out my other items!Be sure to add me to your favorites list!

Directions

Similar products from Other Workholding Tools

5pc FAIRLANE Angle Grippers 9/16" Wide .348" Tall .65" Long #10-32 Hole

5pc FAIRLANE Angle Grippers 9/16" Wide .348" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 19th
6pc FAIRLANE POSITIONING GRIPPER PAD 1" Diameter 1/2" .5" Tall .282" 9/32" Hole

6pc FAIRLANE POSITIONING GRIPPER PAD 1" Diameter 1/2" .5" Tall .282" 9/32" Hole

  • Jeddo, Michigan, United States
  • Nov 19th
Mathey MSA 4 Inch Pipe Beveler

Mathey MSA 4 Inch Pipe Beveler

  • Broussard, Louisiana, United States
  • Nov 19th
7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 3/4" Diameter 1.5" Tall 3/4"-10

7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 3/4" Diameter 1.5" Tall 3/4"-10

  • Jeddo, Michigan, United States
  • Nov 18th
7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 7/8 Diameter 1/2 .5 Tall 3/4"-16

7pc FAIRLANE ADJUSTABLE POSITIONING GRIPPER PAD 7/8 Diameter 1/2 .5 Tall 3/4"-16

  • Jeddo, Michigan, United States
  • Nov 18th
Machinist Serrated Key Gripper 3/4 x 1/2" x 1/2" x 3/8" x 5/32 hole WORK-HOLDING

Machinist Serrated Key Gripper 3/4 x 1/2" x 1/2" x 3/8" x 5/32 hole WORK-HOLDING

  • Jeddo, Michigan, United States
  • Nov 18th
CHICK WORK HOLDING FOUNDATION TABLE 1016 x 482MM, 40" x 19" FREE SHIPPING

CHICK WORK HOLDING FOUNDATION TABLE 1016 x 482MM, 40" x 19" FREE SHIPPING

  • Broomfield, Colorado, United States
  • Nov 18th
1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

1PC Machinist Hold Down Clamp Strap .548" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 18th
2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

2pc FAIRLANE Carbide Angle Grippers 9/16" Wide 3/8" Tall .65" Long #10-32 Hole

  • Jeddo, Michigan, United States
  • Nov 18th
Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms

Heavy Duty 100 mm / 4" Firm Joint Outside OD Calipers Hardened Steel Arms

  • DELHI, DELHI, India
  • Nov 18th
STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

STARRETT No. 289A: ATTACHMENT OFR COMBINATION SQUARES-RULES, VG. COND.

  • Egg Harbor Township, New Jersey, United States
  • Nov 18th
2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

2pc Machinist Hold Down Clamps Straps .540" Slot 7/8" Bottom Width 1/2"-13 Holes

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

3pc FAIRLANE MACHINIST PIVOTING GRIPPER PAD 1" Diameter 1" Tall 5/8"-11 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

3pc FAIRLANE ROUND PIVOTING GRIPPER PAD 11/16" Diameter 3/4" Tall 7/16-14 Thread

  • Jeddo, Michigan, United States
  • Nov 17th
Machinist Material Jack

Machinist Material Jack

  • Paris, Ohio, United States
  • Nov 17th
MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

MACHINIST TOOLS LATHE MILL Machinist Ford Motor Co Pliers Plyers Model A T

  • Morris Plains, New Jersey, United States
  • Nov 17th
lathe, grinder dogs

lathe, grinder dogs

  • Gloucester Point, Virginia, United States
  • Nov 17th
NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

NOGA MAGNETIC HOLDER WITH LINE AND SHUTOFF VALVE

  • Mesa, Arizona, United States
  • Nov 17th
1/2Inch Thread, Split T Slot Nut

1/2Inch Thread, Split T Slot Nut

  • Auburndale, Florida, United States
  • Nov 17th
4pc FAIRLANE ROUND POSITIONING GRIPPER 1/2" DIAMETER 1/2" TALL #10-32 THREADS

4pc FAIRLANE ROUND POSITIONING GRIPPER 1/2" DIAMETER 1/2" TALL #10-32 THREADS

  • Jeddo, Michigan, United States
  • Nov 16th

People who viewed this item also vieved

Taft Peirce Solid Body Cast Iron V-Block (Inv.28361)

Taft Peirce Solid Body Cast Iron V-Block (Inv.28361)

  • Portland, Connecticut, United States
  • Jan 30th
Brown & Sharpe Magnetic Block

Brown & Sharpe Magnetic Block

  • Elkhart, Indiana, United States
  • Jan 30th
7-1/2" x 37" x 10" SET-UP-BLOCK - #26785

7-1/2" x 37" x 10" SET-UP-BLOCK - #26785

  • Cincinnati, Ohio, United States
  • Jan 30th
Perfection Free Live Center - Mech . Dev. Corp Model 4-5-M

Perfection Free Live Center - Mech . Dev. Corp Model 4-5-M

  • Schenectady, New York, United States
  • Jan 30th
ROTOR Super C7 Super Heavy Duty Live Center #7MT Morse Taper

ROTOR Super C7 Super Heavy Duty Live Center #7MT Morse Taper

  • Springfield, Illinois, United States
  • Jan 30th
Riten Live Center 9" Taper

Riten Live Center 9" Taper

  • Portland, Oregon, United States
  • Jan 30th
BUCK 12" 6-JAW SET-TRU LATHE CHUCK D1-8 MOUNT

BUCK 12" 6-JAW SET-TRU LATHE CHUCK D1-8 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
KITAGAWA N-08 3 JAW 8" CNC CHUCK

KITAGAWA N-08 3 JAW 8" CNC CHUCK

  • Cedarburg, Wisconsin, United States
  • Jan 30th
12" 3-JAW LATHE CHUCK D1-8 MOUNT

12" 3-JAW LATHE CHUCK D1-8 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
DE-STA-CO 895SE-AA-251-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO 895SE-AA-251-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO A895B-20-72-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO A895B-20-72-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO A895B-20-46-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

DE-STA-CO A895B-20-46-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used

  • Warren, Michigan, United States
  • Jan 30th
RARE Schaublin 102 E25 Collet Chuck #161-420 + 1 Collet dia 10mm

RARE Schaublin 102 E25 Collet Chuck #161-420 + 1 Collet dia 10mm

  • Ukraine, Ukraine
  • Jan 30th
Hertel HCV40ER32256 Collet Chuck Series ER-32 CAT40

Hertel HCV40ER32256 Collet Chuck Series ER-32 CAT40

  • Vista, California, United States
  • Jan 30th
ER-32 Collet Chuck +11 Collets Set R8 Fits Bridgeports

ER-32 Collet Chuck +11 Collets Set R8 Fits Bridgeports

  • Carrollton, Ohio, United States
  • Jan 30th
CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #7 BROWN & SHARPE TAPER LOT C1861

CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #7 BROWN & SHARPE TAPER LOT C1861

  • Dayton, Ohio, United States
  • Jan 30th
CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1857

CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1857

  • Dayton, Ohio, United States
  • Jan 30th
CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1816

CINCINNATI SERIES C TOOL MASTER MONOSET COLLET #5 BROWN & SHARPE TAPER LOT C1816

  • Dayton, Ohio, United States
  • Jan 30th
Cleveland Precision Systems Two Axis Positioner Traverser

Cleveland Precision Systems Two Axis Positioner Traverser

  • Wyoming, Michigan, United States
  • Jan 30th
MACHINIST LATHE Large CLEAN Face Plate for South Bend ? Lathe 8 1/2" 1 1/2" Bore

MACHINIST LATHE Large CLEAN Face Plate for South Bend ? Lathe 8 1/2" 1 1/2" Bore

  • Morris Plains, New Jersey, United States
  • Jan 30th
Armstrong # 4 Lathe Dog - 1" Max. / JL 129

Armstrong # 4 Lathe Dog - 1" Max. / JL 129

  • Seffner, Florida, United States
  • Jan 30th
EXCELLENT MOORE USA Right Angle VERTICAL BRACKET for 10" MOORE ROTARY TABLE

EXCELLENT MOORE USA Right Angle VERTICAL BRACKET for 10" MOORE ROTARY TABLE

  • Perth, Ontario, Canada
  • Jan 30th
FIBRO INC. FIBROTOR CAM ROTARY TABLE EM 01.0160.1.132.08.0.0.0

FIBRO INC. FIBROTOR CAM ROTARY TABLE EM 01.0160.1.132.08.0.0.0

  • Sunman, Indiana, United States
  • Jan 30th
12" News Horizontal Rotary Indexing Table in good condition. Rotates smoothly.

12" News Horizontal Rotary Indexing Table in good condition. Rotates smoothly.

  • DeKalb, Illinois, United States
  • Jan 30th
3" SWIVEL HEAVY DUTY BASE BENCH VISE (without jaws) IN GOOD WORKING CONDITION

3" SWIVEL HEAVY DUTY BASE BENCH VISE (without jaws) IN GOOD WORKING CONDITION

  • La Mesa, California, United States
  • Jan 30th
wilton swivel 3 1/2 inch bullet vise

wilton swivel 3 1/2 inch bullet vise

  • Flanders, New Jersey, United States
  • Jan 30th
6" MILLING MILL MACHINE VISE (NO JAWS) - 4-3/4" MAX. CAPACITY

6" MILLING MILL MACHINE VISE (NO JAWS) - 4-3/4" MAX. CAPACITY

  • Chino, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies