Phase Ii Ultrasonic Portable Hardness Tester, 5 Yr Warranty, Nist, #met-u1a

C $5,934.50

New Jeresy, Toronto, Canada
Jan 30th

Open on mobile:
QR code

ProductsDescription Ultrasonic Portable Hardness Tester MET-U1A, MET-U1A50, MET-U1A100 & MET-U1A110 NOW AVAILABLE IN 3 DIFFERENT LOADS AND A STUBBY PROBE TO COVER ALL APPLICATIONS! IP66 Waterproof and Dustproof! Non-Destructive Hardness Testing! The PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device. Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections. PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument. The MET-U1A/U1A50/U1A100/U1A110 portable hardness testers meet ASTM A1038-10 specifications. UCI Portable Hardness Testing Method: Model No’s. MET-U1A, MET-U1A50, MET-U1A100 and MET-U1A110 Ultrasonic Contact Impedance is a hardness testing method based on the measurement of the frequency shift of a resonating rod caused by the essentially elastic nature of the finite area of contact between the indenter and the test piece during the penetration. Described as a hardness testingpractice using a calibrated instrument by pressing a resonating rod with a Vickers style Diamond indentor with a fixed force against the surface of the part to be tested. Pre-Programmed Scales/Material: Others combinations can be added upon request Scales Material MeasurementRange Rockwell C Steel 20-67 HRC Rockwell B Aluminum 59-99 HRB Brinell Steel 75-650 HB Vickers Steel 75-1000 HV MET-U1A, MET-U1A50, MET-U1A100 and MET-U1A110 Hardness Tester Standard Accessories: Base Instrument 15N (1.5kgf) Hand-Held Probe (MET-U1A) 50N (5kgf) Hand-Held Probe (MET-U1A50) 100N (10kgf) Hand-Held Probe (MET-U1A100) 15N (1.5kgf) Hand-Held Stubby Probe (MET-U1A110) Calibrated Test Blocks (2pc) Custom Carry Case Battery Charger Operation Manual Functions: Easy To Read Menu Operation Large LCD Display w/ Back Light USB Interface Automatic Reading to All scales including Brinell, Rockwell, Superficial Rockwell & Vickers Automatic Mean Value Data Archive Capacity Specifications: Tolerance +/- 3.0% deviation of average from the reference value of the test block with a minimum of 5 tests Minimum Thickness of sample(MET-U1A) .040” (1mm) Materials: steel & cast steel, alloy tool steel, stainless steel, aluminum, brass, bronze, wrought copper alloy. Battery type: 4-AA NiMH Re-Chargeable Operating temperature: 5-104 degrees F Dimensions: 180 x 80 x 43mm (HxWxD) Weight: 720g (1.10lbs) w/probe Options: NIST/ASTM certified hardness test blocks are available. Technical data for MET-U1A, MET-U1A50, MET-U1A100 and MET-U1A110 UCI Probe Length 160mm Diameter 25mm Indentation Depth 30µm Pressure Force(MET-U1A) 1.5kgf Pressure Force(MET-U1A50) 5kgf Pressure Force(MET-U1A100) 10kgf Pressure Force(MET-U1A110) 1.5kgf Transducer Test Life (approx) 200,000 Min. Thickness for test 1mm Min. Radius for Test 5mm Max Roughness of surface (MET-U1A) Ra 2.5µm Max Roughness of surface (MET-U1A50) Ra 4.5µm Max Roughness of surface (MET-U1A100) Ra 8µm Max Roughness of surface (MET-U1A110) Ra 2.5µm Max Archive 100 Tests Time of Test 1.5 seconds Shown with Optional Support Stand HARDNESS TESTER RESOURCES REBUILT INVENTORY W/ FULL WARRANTY PHASE II WARRANTY CARD PHASE II SAMPLE EVALUATION SHEETS HARDNESS TESTER CONVERSION CHART PRINCIPLE OF ROCKWELL HARDNESS TESTING ROUNDNESS CORRECTION CHART FOR HARNDESS TESTING PORTABLE HARDNESS TESTERS MINIMUM THICKNESS CHART FOR ROCKWELL HARDNESS TESTING ROCKWELL HARDNESS SCALE INDENTOR LOAD CHART HARDNESS SETUP 900-331 900-340 900-360 900-370 NIST LINKS NIST SCALE HISTORY ASTM LINKS All we supply are brand-new, unused, unopened and undamaged items in original packaging (where packaging is applicable). Welcome to Accusize Industrial Tools. Any questions please feel free to call 647 931 2564. We are open from 9:00AM to 5:00PM est., Mon. to Fri. We supply Precision Tools, Machine Tool Accessories, and Industrial Cutting Tools. SHIPPING: Your order will be shipped within 2 business days as your payment is received. Typical orders are shipped via Canada Post Expedited Parcel, Purolator Ground, or UPS Standard. Tracking number will be emailed to you. Buyer pays ACTUAL shipping & insurance cost for the orders. International customers need to pay actual shipping costs plus duty fees We are not profiting from shipping charges. The listed shipping cost is what costs us to deliver the product. PAYMENT: We accept VISA, Master Card PayPal and Certified Check on PayPal.com. Our PayPal account: accusize@gmail.com Orders shipped to Canadian addresses will be charged GST or HST. No sales tax on orders shipped outside of Canada RETURNS: All returns for replacement or Credit have to be with a copy of Accusize invoice within 30 days. Buyer is responsible for return shipping costs and insurance. All shipping and handling fees will not be returned in any case. Any questions regarding our tools, feel free to email us at info@accusizetools.com

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Manufacturer	Phase II
Model	#MET-U1A