Philips Chloride SCN1RBAICT Emergency LED Symmetry Cast Aluminum EXIT Sign, US $139.99 – Picture 0

Philips Chloride SCN1RBAICT Emergency LED Symmetry Cast Aluminum EXIT Sign, US $139.99 – Picture 1

Philips Chloride Scn1rbaict Emergency Led Symmetry Cast Aluminum Exit Sign

US $139.99

Jackson Heights, New York, United States
Jan 30th

Open on mobile:
QR code

codes and standards • UL listed to standard 924 • UL damp location listing optional • IBC, BOCA, and OSHA illumination standard • NFPA 70 (National Electric Code) • NFPA 101 (Life Safety Code) • NEMA Premium certified • Certified to the California Energy Commission in accordance with California law construction • Two-piece die cast aluminum construction with NFPA-compliant field selectable chevrons. • Housing and stencil face castings are available with durable epoxy based powder coat paint or brushed aluminum finishes. • A positive latching exit stencil face provides secure closure yet is easily accessible for installation, maintenance, and inspection. • The exit is secured in an 18 gauge recessed backbox by means of a powder painted trim plate and vandal-resistant lens. diagnostic electronics • 120/277 VAC dual voltage input with surge protection is standard on all models. • Self-powered models feature the Intelli- Charge circuit where the charging system is microprocessor driven with software embedded diagnostic routine and temperature compensation. • Self-powered models include brownout detection, AC lockout, low voltage disconnect, AC power indicator, charge status indicator, audible user-interface controls, visual LED system fault indicator, and tactile push-to-test switch. • Additional equipment safety features include reverse battery polarity detection and protection, and reverse utility power detection and protection. • All self-powered models include an on-board IR receiver for use with the optional hand-held remote (ICIR). • Self-testing electronics (optional) The diagnostic/charging platform with optional self-testing mode automatically runs a one minute self-test every 30 days and a 30 minute test on the sixth and twelfth month in accordance with NFPA 101. A one minute or 90 minute test may be initiated via the push to test switch on the unit or by activating the appropriate test command on the optional IR test device. • Operating temperature range AC-only models: -40°F (-40°C) to 104°F (40°C). Self-powered models - standard location: 65°F (19°C) to 85°F (30°C). Self-powered models - damp location: 32°F (0°C) to 104°F (40°C). • Power consumption AC only red: 0.032 A (120 VAC), 0.015 A (277 VAC), PF = 0.94. AC only green: 0.035 A (120 VAC), 0.016 A (277 VAC), PF = 0.92. Self-powered red: 0.039 A (120 VAC), 0.018 A (277 VAC), PF = 0.94. Self-powered green: 0.040 A (120 VAC), 0.018 A (277 VAC), PF = 0.94. lamps • Illumination of the stencil face is accomplished with long lasting, high output Light Emitting Diodes (LEDs). • Hot spots and striations are eliminated by the internal “light chamber” allowing for even illumination in normal and emergency situations. • Average legend illumination levels exceed 25fl (79 cd/m2) during normal and emergency operation. battery • Maintenance free sealed nickel cadmium battery. • Provides a minimum of 90 minutes of emergency power.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Philips
MPN	scn1rbaict
Model	SCN1RBAICT