Philips Sa639dh Low Voltage Mixer Fm/if System Ic,qty.5

US $16.99

  • Potomac, Maryland, United States
  • Jan 29th
You are bidding on one LOT (Qty.5) of  New Philips/NXP Semiconductor Low Power Voltage Mixer FM IF System with Filter Amplifier and Data Switch, Part Number: SA639DH in SSOP-24 Package. General Information for SA639DH: The SA639 is a low-voltage high performance monolithic FM IF system with high-speed RSSI incorporating a mixer/oscillator, two wideband limiting intermediate frequency amplifiers, quadrature detector, logarithmic received signal strength indicator (RSSI), fast RSSI op amps, voltage regulator, wideband data output, post detection filter amplifier and data switch. The SA639 is available in 24-lead TSSOP (Thin shrink small outline package). The SA639 was designed for high bandwidth portable communication applications and will function down to 2.7V. The RF section is similar to the famous NE605. The data output provides a minimum bandwidth of 1MHz to demodulate wideband data. The RSSI output is amplified and has access to the feedback pin. This enables the designer to level adjust the outputs or add filtering. The post-detection amplifier may be used to realize a low pass filter function. A programmable data switch routes a portion of the data signal to an external integration circuit that generates a data comparator reference voltage. SA639 incorporates a power down mode which powers down the device when Pin 8 is high. Power down logic levels are CMOS and TTL compatible with high input impedance Spec see Data Sheet at: http://www.nxp.com/#/pip/pip=[pip=SA639_3]|pp=[v=d,t=pip,i=SA639_3,fi=31466,ps=0][0]

Directions

Similar products from Analog Semiconductors, Amplifiers & Modules

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies