Phoenix R200 Lgr Dehumidifer Used Tested And Working

US $1,800.00

  • Aurora, Colorado, United States
  • Jun 9th
Maneuvering the unit around your job site is a breeze with the telescoping handle and 12-inch recessed wheels, which allow you to easily roll the dehumidifier from place to place. The handle retracts and the dehumidifier is stackable to save storage space. Rugged roto-molded housing protects the unit from damage and makes the body of the unit resistant to chemicals, corrosion, and dents to ensure maximum lifespan. High-Capacity Water Removal The Phoenix R200 is energy efficient and saves on electricity costs. Drawing only 8.3 amps of power, it extracts 5.2 pints of water per kilowatt used and removes 35% more water than similar-sized dehumidifiers. It absorbs 125 pints of excess moisture per day at AHAM conditions and approximately 208 pints at saturation. Patented bypass technology enables higher temperature operation, and the MERV-11 pleated air filter provides effective air filtration. The focused air return outlet was designed to direct dehumidified air downward across wet surfaces, while the powerful blower delivers 325 CFM for faster drying. Additionally, the Phoenix R200 LGR uses eco-friendly R-410A refrigerant, which does not deplete ozone. Convenient Water Removal Options The Phoenix R200 LGR Dehumidifier was built with multiple ducting options to achieve maximum moisture removal. It comes equipped with a 10-inch supply duct that can be attached to the outlet and a 12-inch flex duct that you can seal onto the top cover. An internal condensate pump removes water collected during dehumidification. The condensate water can then be pumped 20 feet above the dehumidifier with the built-in hose attachment. Additional Features User-Friendly: Easy-to-use electronic controls.   Purge Function: This feature allows you to manually remove condensate water from the reservoir.   Hour Meter: This digital meter displays the cumulative hours and job time the dehumidifier has been turned on to the tenth of an hour.   Automatic Defrost: The internal thermistor will cycle the compressor on and off and display the defrost cycle light when frost begins to build up on the evaporator coil.   Outlet Grille: The outlet grille accepts a variety of thermo-hygrometer probes for accurate psychometric readings.   Float Safety: This switch turns off the dehumidifier when the water reservoir is full. Specifications Industrial Use Warehouse, Water Damage Restoration Pint Capacity 125 pints Low Temperature Operation (41 degrees F and Under) Yes Energy Star No Lowest Operating Temperature 33 degrees Height 33.5 in. Width 20 in. Depth 20 in. Weight 105 lbs. Water Container No Full Bucket Indicator/Auto Shutoff Yes Internal Condensate Pump Yes Continuous Drain Capable Yes Drain Hose Included Yes Drain Hose Length 33 ft. Controls Electronic Humidistat   No Automatic Defrost Yes Fan Operation   Runs Continuously Number of Fan Speeds 1 Cubic Feet Per Minute (Max) 325 CFM Number of Filters 1 Filter Type MERV-11 filter Auto Restart On Power Failure No Ductable Yes Refrigerant Type R-410A Casters Yes Maximum Amperage 8.3 Amps Voltage 110-120 V Safety Certifications CSA, UL
this is like new condition.
Brand Therma-Stor
Model Phoenix R200

Directions

Similar products from Carpet Extractor Machines

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies