Pic28 Diy Prototyping Kit For 28 Pin Microchip Pic Microcontrollers Gbw

US $10.99

Shanghai, China
Jan 29th

Open on mobile:
QR code

PIC28 Prototyping Kit for 28 Pin Microchip PIC Microcontrollers for DIY Click to Enlarge Click to Enlarge Click to Enlarge PIC28 - Prototyping Kit for 28 pin Microchip PIC microcontrollers. Examples:- 16F876, 18F252, 18F2520 & 18F2550 etc. With regard to the 18F2550, the kit allows easy prototyping of this USB part too. Everything shown in the picture to the right is included in the kit except the PIC micro. The crystal 4MHz and 20MHz will be supplied. We use 4MHz or 20MHZ for USB with the 18F2550. The PCB is a high quality double sided PTH (plated through hole) 1.6mm FR4 (Fiberglass) board 76 x 65mm in size. It incorporates a large prototyping area with pads on both sides of the board. The 5V power supply for the PIC can be selected to be from the on-board 5V regulator, the Microchip ICD2 or USB, both the +5V and 0V power rails are extended along the top & bottom edges of the board for easy access. An onboard RS232 level converter buffers the PIC UART to/from the 9 pin D connector, which is tracked for connection to a PC serial port. The RTS & CTS lines are also buffered and brought to CN9. The RS232 interface can be disconnected from the PIC using jumper links in CN6. The USB socket can also be disconnected from the PIC using jumper links in CN6, this would be useful if using a non USB PIC, but powering from a USB cable. A 5 pin programming header is also provided to allow in-circuit programming from other programmers e.g. the MELABS serial or USB programmers.The 470nf USB decoupling capacitor can be disconneted from the PIC using CN7. All port pins are made available to the left of the microcontroller for easy access. It is buyer's responsibility to contact us within 14 calendar days of receiving a defective product. Otherwise, no replacement or refund will be made. All items MUST be returned in their original condition. Buyer is responsible for shipping and proof of delivery on all returns. We aim to achieve a 5 stars rating for each and every transaction. If you are not 100% satisfied, PLEASE don't leave a neutral or negative feedback or low 1, 2 DSR before you contact us for help. Also please note that due to the recent Air Cargo Security Alerts, there may be delays totally outside our control. Your purchase will be shipped via standard airmail, which normally takes 7-20 working days to reach you. We also offer express shipping, which normally takes 4-7 working days to reach you. You should expect to pay any amount, if there is any, charged by the government in your respective country; this includes (and is not limited to) duties & taxes. We accept PayPal only. inkfrog terapeak i000000 On Dec-16-14 at 06:51:16 PST, seller added the following information: