+ Post new Ad
Piper Aircraft Maule Fabric Tester .....(5-4-2), US $200.00 – Picture 0
Piper Aircraft Maule Fabric Tester .....(5-4-2), US $200.00 – Picture 1
Piper Aircraft Maule Fabric Tester .....(5-4-2), US $200.00 – Picture 0
Piper Aircraft Maule Fabric Tester .....(5-4-2), US $200.00 – Picture 1

Piper Aircraft Maule Fabric Tester .....(5-4-2)

US $200.00

  • San Antonio, Texas, United States
  • Jan 30th
Open on mobile:
QR code
Maule Fabric Tester The Maule Fabric Tester is used to test fabric tensile strength on fabric covered aircraft for minimum FAA requirements without removing strips or punching holes in the fabric. The Maule Fabric Tester may also be used to test wing struts for internal corrosion as required by the FAA on all Piper aircraft. -  Good overall condition -  This item came from a local calibration lab.  The man that owned the "Cal Lab" passed away   several years ago and his family held an auction.  It is likely that it was calibrated and then sat on a shelf.   I cannot verify that it is positively in spec but chances are high.   ** If you purchase this item and are unsatisfied for any reason, you may return it within 14 days (in the same condition when sent) for a full refund. To see more tools, visit our eBay store: RedDotTool -------------------------- Combined Shipping ---------------------------------------------------------------------------------------------- If purchasing  several different items I will combine shipping.   1.  Please use the "Add To Cart" feature.   2.  When done shopping press the "Request total from seller" button.      -  (Located above the first item in your cart.) 3.  I will then send you an invoice with the appropriate shipping amount. ----------------------------------------------------------------------------------------------

Directions

Similar products from Multidetectors & Inspection Gauges

Sunnen PG 400 EM Gage setting fixture

Sunnen PG 400 EM Gage setting fixture

  • Framingham, Massachusetts, United States
  • Jan 30th
Federal Comparator Stand: 35b30 10" .0001" GG11

Federal Comparator Stand: 35b30 10" .0001" GG11

  • Bloomfield, Connecticut, United States
  • Jan 30th
IMMACULATE! KANON 24" IMPERIAL & METRIC HEIGHT GAGE W/ WOODEN BOX

IMMACULATE! KANON 24" IMPERIAL & METRIC HEIGHT GAGE W/ WOODEN BOX

  • Chino, California, United States
  • Jan 30th
THREAD PLUG GAGES PARKER 9/16-18 UNF 3B AND UNKNOWN 9/16-18 (LOT OF 2) #52459

THREAD PLUG GAGES PARKER 9/16-18 UNF 3B AND UNKNOWN 9/16-18 (LOT OF 2) #52459

  • Resaca, Georgia, United States
  • Jan 30th
Lufkin No. 199 Dial Needle Indicator

Lufkin No. 199 Dial Needle Indicator

  • Concord, California, United States
  • Jan 30th
2 federal snap gages model 301P 1-2" 2-3" .0001 ACCURATE. Great condition!

2 federal snap gages model 301P 1-2" 2-3" .0001 ACCURATE. Great condition!

  • Enfield, Connecticut, United States
  • Jan 30th
starret bore gauge

starret bore gauge

  • Orlando, Florida, United States
  • Jan 30th
Diatest Split Anvil Bore Gage Set, .165"-.394" range. Not Complete

Diatest Split Anvil Bore Gage Set, .165"-.394" range. Not Complete

  • Brea, California, United States
  • Jan 30th
Heidenhain ST 3087 Linear Gage

Heidenhain ST 3087 Linear Gage

  • Richmond, Indiana, United States
  • Jan 30th
BROWN & SHARPE Telescoping Gage Set Measuring Range: 5/16"~ 6" #591-21

BROWN & SHARPE Telescoping Gage Set Measuring Range: 5/16"~ 6" #591-21

  • Rome, New York, United States
  • Jan 30th
MecMesin M2500E Test Stand / Adhesion Tester

MecMesin M2500E Test Stand / Adhesion Tester

  • Bloomfield, Connecticut, United States
  • Jan 30th
JAPAN! MODERN TOOLS 18" VERNIER HEIGHT GAGE GAUGE .001" GRADUATIONS

JAPAN! MODERN TOOLS 18" VERNIER HEIGHT GAGE GAUGE .001" GRADUATIONS

  • Chino, California, United States
  • Jan 30th
Vintage Surface Gauge, Machinist/Toolmaker/Inspection Gauge

Vintage Surface Gauge, Machinist/Toolmaker/Inspection Gauge

  • Old Orchard Beach, Maine, United States
  • Jan 30th
MACHINIST/TOOLMAKER TOOLS--SMALL JACK

MACHINIST/TOOLMAKER TOOLS--SMALL JACK

  • Atco, New Jersey, United States
  • Jan 30th
Meda Wiggler / Center Finder Set No. 170-0500

Meda Wiggler / Center Finder Set No. 170-0500

  • Brunswick, Maryland, United States
  • Jan 30th
Scherr-Tumico 32oz Force Gauge.

Scherr-Tumico 32oz Force Gauge.

  • Marcus Hook, Pennsylvania, United States
  • Jan 30th
18 inch Height gauge

18 inch Height gauge

  • Ontario, California, United States
  • Jan 30th
Wixey WR300 Digital Angle Gauge NEW FREE SHIPPING

Wixey WR300 Digital Angle Gauge NEW FREE SHIPPING

  • Bordentown, New Jersey, United States
  • Jan 30th
Johnson Gage- Functional & Pitch Diameter Size Segments, Thread Rolls, etc...

Johnson Gage- Functional & Pitch Diameter Size Segments, Thread Rolls, etc...

  • Bloomfield, Connecticut, United States
  • Jan 30th
M3 x 0.5 6G GO THREAD RING GAGE MACHINE SHOP INSPECTION TOOLING M 3 6 G .5

M3 x 0.5 6G GO THREAD RING GAGE MACHINE SHOP INSPECTION TOOLING M 3 6 G .5

  • Dayton, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

BROWN & SHARP 13" VINTAGE CALIPER #N-20069

BROWN & SHARP 13" VINTAGE CALIPER #N-20069

  • Marion, Illinois, United States
  • Mar 11th
6" Inch/150mm Stainless STEEL Electronic LCD Digital Vernier Caliper Micrometer

6" Inch/150mm Stainless STEEL Electronic LCD Digital Vernier Caliper Micrometer

  • United States
  • Mar 11th
Anytime Tools 5 pc 1" to 15" Dial/Digital Indicator Extension Stem Rod Set

Anytime Tools 5 pc 1" to 15" Dial/Digital Indicator Extension Stem Rod Set

  • USA, United States
  • Jun 1st
Teclock - 0.25 Range, 0-50-0 Dial Reading, 0.001 Inch Graduation Dial Indicator

Teclock - 0.25 Range, 0-50-0 Dial Reading, 0.001 Inch Graduation Dial Indicator

  • Edison, New Jersey, United States
  • Jun 1st
Vintage; L.S. STARRETT MICROMETER #113

Vintage; L.S. STARRETT MICROMETER #113

  • Mission, Texas, United States
  • Jun 1st
Starrett No. 436 Outside Micrometer 6 - 7 Inches, Caliper, 6-7", with Wooden Box

Starrett No. 436 Outside Micrometer 6 - 7 Inches, Caliper, 6-7", with Wooden Box

  • Aliso Viejo, California, United States
  • Jun 1st
STARRETT C636EM-6 METRIC + INCH SCALE SATIN CHROME SPRING-TEMPERED 6" LONG

STARRETT C636EM-6 METRIC + INCH SCALE SATIN CHROME SPRING-TEMPERED 6" LONG

  • Barre, Massachusetts, United States
  • Jun 3rd
STARRETT B150-36 REGULAR STEEL BLADE 36R GRADS 1/2MM, 32NDS, 1MM, 64THS

STARRETT B150-36 REGULAR STEEL BLADE 36R GRADS 1/2MM, 32NDS, 1MM, 64THS

  • Barre, Massachusetts, United States
  • Jun 3rd
Renishaw TK5 Tool Kit

Renishaw TK5 Tool Kit

  • Morrisville, North Carolina, United States
  • Jun 3rd
Bulk Renishaw items for Sale, ACC1 - PC1M - PHC10 - ACC2 - PHD10

Bulk Renishaw items for Sale, ACC1 - PC1M - PHC10 - ACC2 - PHD10

  • Morrisville, North Carolina, United States
  • Jun 3rd
Starrett 657 heavy duty magnetic base & upright post w/ 650 Dial Indicator

Starrett 657 heavy duty magnetic base & upright post w/ 650 Dial Indicator

  • Millbrae, California, United States
  • Jun 7th
MAGNETIC TOOLS MAGNETIC BASE TOOLMAKER MACHINIST No-box-

MAGNETIC TOOLS MAGNETIC BASE TOOLMAKER MACHINIST No-box-

  • San Bernardino, California, United States
  • Jun 7th
MACHINIST TOOLS * DIAL INDICATOR STAND * SERRATED * ~ 3/4 X 2

MACHINIST TOOLS * DIAL INDICATOR STAND * SERRATED * ~ 3/4 X 2

  • Camarillo, California, United States
  • Jun 9th
MACHINIST TOOLS * DIAL INDICATOR STAND * SERRATED * ~ 3-1/2 X 2

MACHINIST TOOLS * DIAL INDICATOR STAND * SERRATED * ~ 3-1/2 X 2

  • Camarillo, California, United States
  • Jun 9th
? STARRETT, VINTAGE RARE 7PC, MACHINIST, TOOLMAKER, ENGINEERS, DRAFTSMAN SET ?

? STARRETT, VINTAGE RARE 7PC, MACHINIST, TOOLMAKER, ENGINEERS, DRAFTSMAN SET ?

  • Anaheim, California, United States
  • Jun 9th
MACHINIST LATHE MILL Starrett Micro Small Adjustable Combination Set Rule Square

MACHINIST LATHE MILL Starrett Micro Small Adjustable Combination Set Rule Square

  • Morris Plains, New Jersey, United States
  • Jun 9th
24 X 18 X 36 0-LEDGE SURFACE PLATE STAND (4401-1301)

24 X 18 X 36 0-LEDGE SURFACE PLATE STAND (4401-1301)

  • Chino, California, United States
  • Jun 9th
Starrett Grade A Pink Surface Plate 12" X 12" X 4"

Starrett Grade A Pink Surface Plate 12" X 12" X 4"

  • Saint Helen, Michigan, United States
  • Jun 9th
Mitutoyo Steel Square Gage Block, ASME Grade 0, 6.0" Length 614206

Mitutoyo Steel Square Gage Block, ASME Grade 0, 6.0" Length 614206

  • Burton, Michigan, United States
  • Jun 9th
FULL-GAUGE-GAGE-BLOCK-SET-ACCESSORIES-PK-1-Endmas-Zube Made in USSR ! NEW!!!

FULL-GAUGE-GAGE-BLOCK-SET-ACCESSORIES-PK-1-Endmas-Zube Made in USSR ! NEW!!!

  • Balti, Balti, Moldova
  • Jun 9th
Universal Bevel Protractor with Dial Reading

Universal Bevel Protractor with Dial Reading

  • South Hackensack, New Jersey, United States
  • Jun 9th
NEW Wixey WR418 18 Inch Digital Protractor FREE SHIPPING

NEW Wixey WR418 18 Inch Digital Protractor FREE SHIPPING

  • Multiple Warehouses, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies