Plasma Cutter 45 Amp Dual Voltage 120/240v Tested And Works Great

US $145.00

Wentworth, New Hampshire, United States
Jun 4th

Open on mobile:
QR code

The photos are STOCK not the actual machine you will get. The machine you are buying is the same except for dirt and dust. Lightly used, a bit dirty and dusty from that use. The power cord had a piece of hot metal fall on it and melt a spot in the outer coating and lightly into the insulation of one of the conductors so its been taped over with some 3M electrical tape. Has NO MANUAL. Product description Plasma cutter, Touch Metal Get Arc, 45 Amps 220 V cutting current, 35 Amps 110 V cutting current. Machine with current display, range from 15 to 45 amps. The time can be adjusted from 2 to 15 seconds. Easy machine cut stainless steel, carbon steel, alloy, etc. Air compressor we suggest can supply air 30L / min, better 40L / min. Air gauge preset on the front panel of the machine, user can easily read the air pressure through it. The machine also with postal time function can adjust the torch head after air. We suggest that the breaker has more than 35 amps if it is plugged in at 110V, you need a breaker at least 30 amps if it is connected to the machine at 220V. This machine is 110 / 220V dual voltage, automatically indicates the input voltage, you do not need to change the voltage by the handle on the side of the machine, but you still need to connect the machine by hand to different power sources. Low Voltage: 220V, Quality Cutting Thickness is 6mm at 65 PSI, Gravity Cutting Thickness is 10mm at 65 PSI.Low Voltage: 110V, Quality Cut Thickness is 6mm at 65 PSI, Gravity Cut Thickness is 10mm at 65 PSI Plasma Cutter, Plasma X45, 45Amps Plasma Cutter This machine is dual voltage 110 / 220V (auto indicates). The following accessories come with the machine: 1 x plasma cutter (fixed 110V plug) 1 x 4M PT31 cutting torch 1 air regulator (fixed air meter on the front panel). 1 110V to 220V conversion cable. 1 6.6 ft. Ground clamp. 5 x electrodes for cutting torch 5 tips for cutting torch. 1 x 6.6 ft air hose 4 hose clamps. Specifications Input voltage: AC 110 / 220V +/- 10% High frequency: 50 / 60Hz No load voltage: 280 V. Nominal input capacity: 5.4 KVA Nominal duty cycle: 60% at 45A, 100% at 35A 220V cut-off current range: 15A-45 Amps. 110V Cut-off current range : 15-35Amps Post time setting range: 2-15 seconds Starting arc; Touch metal (no pilot arc function) Quality Cut Thickness: 6mm @ 110V 60 PSI. Maximum Cut Thickness: 10mm @ 220V 65 PSI. Insulation class: B Cutting torch length: Ground wire length: 2M Packing dimension: 14.2 * 6.1 * 13 inches

“Lightly used but is a bit dirty and dusty from what use it did get.”

Brand

Warfox

Item Type

Plasma Cutter

Input Amperage

27 amps

Country/Region of Manufacture

China

MPN

Does Not Apply