+ Post new Ad
PLASTIC POLY CLAMP SET . SET OF TWO WITH HARDWARE MACHINIST SHOP CLAMPS, US $660 – Picture 0
PLASTIC POLY CLAMP SET . SET OF TWO WITH HARDWARE MACHINIST SHOP CLAMPS, US $660 – Picture 0

Plastic Poly Clamp Set . Set Of Two With Hardware Machinist Shop Clamps

US $660

  • Tijeras, New Mexico, United States
  • Jun 10th
Open on mobile:
QR code
FOR SALE: I HAD A FEW REQUESTS FOR THESE AND THEY WORK WELL IF YOU ARE CONCERNED WITH SURFACE FINISH CALL OUTS OR IF YOU ARE A WOOD WORKER.  ONE SET OF TWO PLASTIC POLY MACHINIST CLAMPS. IF YOU ARE WORKING WITH WOOD THEY ARE GREAT. THEY HOLD VERY WELL.   CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG,  .750"  WIDE,  AND 3/8" THICK  AND ARE VERY STRONG. ALL STAINLESS HARDWARE (1/4 - 20) IS INCLUDED WITH THE CLAMPS ALONG WITH ONE 3/16 "WRENCH. SIMPLY DRILL AND TAP A 1/4 -20 HOLE IN "ANYTHING"  AND YOU ARE READY TO GO. SHOWN IN THE PICTURES IS A FIXTURE PLATE JUST FOR AN EXAMPLE. THE HARDWARE INCLUDED CAN BE ADJUSTED TO HOLD ANYTHING FROM 0" TO 1.25" HIGH. HOWEVER, YOU CAN ADJUST THEM TO ANY HIEGHT BY SIMPLY USING LONGER 1/4 -20'S OR THREADED ROD. ONE END OF THE CLAMPS IS THREADED 1/4 - 20 AND THE SLOT HAS PLENTY OF ROOM FOR ADJUSTMENT. CUSTOMERS ARE KEY TO ME SO I WILL PAY FOR SHIPPING WITHIN THE UNITED STATES. IF YOU BUY 3 SETS YOU WILL GET THE FOURTH "FREE"!!!!!!!!!!!!!!!!!!  I KNOW YOU WILL USE THESE AND LOVE THEM AS I HAVE FOR MANY YEARS. PLEASE CHECK OUT OUR OTHER NEW TOOLS FOR SALE.   IN THE LAST PICTURE. (BRASS CLAMPS AND WORK STOPS)   THANK YOU!        

Directions

Similar products from Fittings & Plates

Quick Indexing Quill Feed Handle for the Milling Machine

Quick Indexing Quill Feed Handle for the Milling Machine

  • Norcross, Georgia, United States
  • Jun 10th
Nice!! 10"x10"x5" Machine Riser Block Heavy Duty

Nice!! 10"x10"x5" Machine Riser Block Heavy Duty

  • San Bernardino, California, United States
  • Jun 10th
40 to 55 ton 2 Notch Shop Arbor Hydraulic PRESS PLATES, 1.75"X4.5"X14" BED BARS

40 to 55 ton 2 Notch Shop Arbor Hydraulic PRESS PLATES, 1.75"X4.5"X14" BED BARS

  • Kalamazoo, Michigan, United States
  • Jun 10th
HOMMEL-MOVOMATIC GUAGING SYSTEM CR-100 W/ DR-260 SHIPS FREE

HOMMEL-MOVOMATIC GUAGING SYSTEM CR-100 W/ DR-260 SHIPS FREE

  • Oxnard, California, United States
  • Jun 10th
Hex Center 5/8" Shaft Control Drive Machine Adjusting Steel Knob Knurled Edge

Hex Center 5/8" Shaft Control Drive Machine Adjusting Steel Knob Knurled Edge

  • San Diego, California, United States
  • Jun 10th
Angle Plate; Model LN 103; 4 1/2"x7 3/4" x 5" (CTAM 9261)

Angle Plate; Model LN 103; 4 1/2"x7 3/4" x 5" (CTAM 9261)

  • Sicklerville, New Jersey, United States
  • Jun 10th
Tilting Table, 5 x 7" Table Size, 7/16" T-Slots, 3-3/4" H | (41B)

Tilting Table, 5 x 7" Table Size, 7/16" T-Slots, 3-3/4" H | (41B)

  • Saint Louis, Missouri, United States
  • Jun 10th
MACHINIST TOOLS 6" X 1&3/16" X 1&1/4" SINE BAR SINEBAR

MACHINIST TOOLS 6" X 1&3/16" X 1&1/4" SINE BAR SINEBAR

  • Bremen, Indiana, United States
  • Jun 10th
MACHINIST TOOLS 11" X 1&1/2" X 1&1/2" SINE BAR SINEBAR

MACHINIST TOOLS 11" X 1&1/2" X 1&1/2" SINE BAR SINEBAR

  • Bremen, Indiana, United States
  • Jun 10th
Taft Peirce Sine Block No. 9118-10 (Inv.35375)

Taft Peirce Sine Block No. 9118-10 (Inv.35375)

  • Portland, Connecticut, United States
  • Jun 10th
Excellent DOALL BLACK GRANITE ANGLE PLATE 9" X 9" Made in USA +/- .00050"

Excellent DOALL BLACK GRANITE ANGLE PLATE 9" X 9" Made in USA +/- .00050"

  • Middlesex, New Jersey, United States
  • Jun 10th
Excellent DOALL BLACK GRANITE PLATE 18" X 18" x 4" USA made +/- .00050" Grade A

Excellent DOALL BLACK GRANITE PLATE 18" X 18" x 4" USA made +/- .00050" Grade A

  • Middlesex, New Jersey, United States
  • Jun 10th
Sine plate 10" x 5.75" x 3.25" tall w/ wooden case

Sine plate 10" x 5.75" x 3.25" tall w/ wooden case

  • Montebello, California, United States
  • Jun 10th
Machinist 5" Sine Plate 3 3/4" X 6 7/8" X 2 3/4" Tall

Machinist 5" Sine Plate 3 3/4" X 6 7/8" X 2 3/4" Tall

  • Yorktown, Indiana, United States
  • Jun 10th
LOT OF ARMSTRONG HOLD DOWNS No. 66 & 68 6 - 8 "

LOT OF ARMSTRONG HOLD DOWNS No. 66 & 68 6 - 8 "

  • California, United States
  • Jun 10th
LOT OF VULCAN HOLD DOWNS No.74 & 76

LOT OF VULCAN HOLD DOWNS No.74 & 76

  • California, United States
  • Jun 10th
LOT OF ALUMINUM SET UP BLOCKS

LOT OF ALUMINUM SET UP BLOCKS

  • California, United States
  • Jun 10th
LOT OF RALMIKES HOLD DOWN CLAMPS 6 "

LOT OF RALMIKES HOLD DOWN CLAMPS 6 "

  • California, United States
  • Jun 10th
MACHINIST TOOLS LATHE MILL Machinsit 5" 1 1/2" 8 TPI Face Plate Atlas South Bend

MACHINIST TOOLS LATHE MILL Machinsit 5" 1 1/2" 8 TPI Face Plate Atlas South Bend

  • Morris Plains, New Jersey, United States
  • Jun 10th
Older Motorized Spin Indexer or Grinder Head

Older Motorized Spin Indexer or Grinder Head

  • Phoenix, Arizona, United States
  • Jun 10th

People who viewed this item also vieved

PRECISION V BLOCK MULTI 1-1/4" CAPACITY W/ CLAMP

PRECISION V BLOCK MULTI 1-1/4" CAPACITY W/ CLAMP

  • Ellington, New York, United States
  • Jan 30th
PRECISION MULTI CAPACITY V BLOCK MULTI CAPACITY W/ CLAMP

PRECISION MULTI CAPACITY V BLOCK MULTI CAPACITY W/ CLAMP

  • Ellington, New York, United States
  • Jan 30th
SUPER PRECISION SINE BAR 2"

SUPER PRECISION SINE BAR 2"

  • Ellington, New York, United States
  • Jan 30th
VERY NICE ORIGINAL CRAFTSMAN MT2 CUP CENTER WOOD TOOL 4 LATHE #21212

VERY NICE ORIGINAL CRAFTSMAN MT2 CUP CENTER WOOD TOOL 4 LATHE #21212

  • Danville, New Hampshire, United States
  • Jan 30th
J&S TOOL LONG POINT LIVE CENTER 5MT SHANK

J&S TOOL LONG POINT LIVE CENTER 5MT SHANK

  • Wadley, Alabama, United States
  • Jan 30th
RITEN 51602 Live Center, 7/8 In Std Point, 2MT

RITEN 51602 Live Center, 7/8 In Std Point, 2MT

  • Tuscumbia, Alabama, United States
  • Jan 30th
SET OF 3 USED CUSHMAN HARD MASTER SCROLL CHUCK BASE JAWS (1.45" Jaw Width)

SET OF 3 USED CUSHMAN HARD MASTER SCROLL CHUCK BASE JAWS (1.45" Jaw Width)

  • Fairfield, Iowa, United States
  • Jan 30th
3" JAW CHUCK 12" DIAMETER (4985)

3" JAW CHUCK 12" DIAMETER (4985)

  • Chicago, Illinois, United States
  • Jan 30th
8" Soft Jaw Boring Ring lathe Chucks BORE

8" Soft Jaw Boring Ring lathe Chucks BORE

  • Columbus, Ohio, United States
  • Jan 30th
2 industrial c clamps- seating clamps F&M clamp

2 industrial c clamps- seating clamps F&M clamp

  • Wellman, Iowa, United States
  • Jan 30th
11 Aerospace Side Grip Clamps (9 Monogram 2 Unmarked) with Monolock Pliers

11 Aerospace Side Grip Clamps (9 Monogram 2 Unmarked) with Monolock Pliers

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
Starrett 4in "A" Clamps 164c

Starrett 4in "A" Clamps 164c

  • Wilmington, North Carolina, United States
  • Jan 30th
Burnerd MultiSize Chuck LC15 L0

Burnerd MultiSize Chuck LC15 L0

  • Woodstock, Illinois, United States
  • Jan 30th
Collet Chucks? - Made in Sweden - Lot of 4

Collet Chucks? - Made in Sweden - Lot of 4

  • Ventura, California, United States
  • Jan 30th
Jacobs Rubber Flex Collet Chuck & Collets

Jacobs Rubber Flex Collet Chuck & Collets

  • Whitewater, Wisconsin, United States
  • Jan 30th
R8 COLLET 11/16

R8 COLLET 11/16

  • San Carlos, California, United States
  • Jan 30th
5C COLLET SIZE 63/64

5C COLLET SIZE 63/64

  • San Carlos, California, United States
  • Jan 30th
5C 1/4 Round Collet (5C 49)

5C 1/4 Round Collet (5C 49)

  • San Carlos, California, United States
  • Jan 30th
PRECISION PARELLEL SET 1/8 INCH

PRECISION PARELLEL SET 1/8 INCH

  • Terre Haute, Indiana, United States
  • Jan 30th
*PRE OWNED* Eriez RPL-3 Permanent Magnet 300lb / 1in

*PRE OWNED* Eriez RPL-3 Permanent Magnet 300lb / 1in

  • Gloucester City, New Jersey, United States
  • Jan 30th
Drive Handle Bison 6" Horizontal/Vertical Index Super Spacer Toolmex 7-613-4406

Drive Handle Bison 6" Horizontal/Vertical Index Super Spacer Toolmex 7-613-4406

  • Wood Dale, Illinois, United States
  • Jan 30th
Dividing plate for 6", 8" ,10" and 12" rotary tables

Dividing plate for 6", 8" ,10" and 12" rotary tables

  • Duluth, Georgia, United States
  • Jan 30th
HAAS HRT 600 4TH AXIS ROTARY TABLE

HAAS HRT 600 4TH AXIS ROTARY TABLE

  • Huntley, Illinois, United States
  • Jan 30th
Rigid / Phoenix 4 Head 4th & 5th Axis CNC Tilting Rotary Table, Modular Build

Rigid / Phoenix 4 Head 4th & 5th Axis CNC Tilting Rotary Table, Modular Build

  • Grand Rapids, Michigan, United States
  • Jan 30th
2-3-4" Accupro Gold 23 hole set up block pair-NOS .0003 CBL0013-B

2-3-4" Accupro Gold 23 hole set up block pair-NOS .0003 CBL0013-B

  • Denver, Colorado, United States
  • Jan 30th
MACHINIST MILL LATHE NICE Prentiss Bull Dog # 90 3 1/4" Vise

MACHINIST MILL LATHE NICE Prentiss Bull Dog # 90 3 1/4" Vise

  • Morris Plains, New Jersey, United States
  • Jan 30th
PALMGREN TILTING MACHINISTS DRILL PRESS VISE jaw 1 1/2 wide opening 1 7/8

PALMGREN TILTING MACHINISTS DRILL PRESS VISE jaw 1 1/2 wide opening 1 7/8

  • Anderson, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies