Platinum/iridium 80%/20% .002" Wire X 2 Feet

US $22.00

  • Colorado Springs, Colorado, United States
  • Jan 29th
You are buying a 2 feet total length (1 envelope of 2' continuous) of laboratory/scientific quality .002" diameter wire made from an alloy of 80% Platinum and 20% Iridium produced by California Fine Wire Company. This wire is often used in Semiconductor/IC, Aerospace, Test, Medical and Electronics industries due to its high performance electrical characteristics.  This is not jewelry wire, nor should it be purchased for its scrap value.  The wire is about as fine as human hair, so weighs almost nothing. The product is hard temper UTS 246,085 YTS 239,261 Elongation 1.07 GBL 350.70.  The length you order will be cut from the spool pictured and will be wrapped in a new clear vinyl envelope.   Technical Data Sheet Platinum 20% Iridium Material Number: 100168 CALIFORNIA FINE WIRE Electrical CALIFORNIA FINE WIRE Specific Resistance (?-CM/F) 192 Specific Resistivity(??-cm?/cm) 32 Commercial Resistance Tolerance (On Sizes below .020) 3.00% Commercial Resistance Tolerance (On Sizes above .020) 5.00% Temperature Coefficient of Resistance (ohms/ohm/Deg. C {0 to 100°C}) .0008 CALIFORNIA FINE WIRE Physical CALIFORNIA FINE WIRE Density (gm/cm? ) 21.68 Tensile Strength: Density(lbs/in?) 0.783 UTS Hard: 150,000 UTS Stress Relieved: 120,000 UTS Annealed: 97,500 Thermal Conductivity (watts/cm/Deg. C) 0.18 Note: All values may vary dependant on specific design and usage Melting Point C 1810 Melting Point °F 3290

Directions

Similar products from Other Cords, Cables & Wires

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies