PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 0

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 1

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 2

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 3

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 4

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 5

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 6

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 7

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 8

PMI Kollmorgen S6M4H ServoDisc Servo Disc Motor w/ Tach Tachometer & Encoder, US $74.99 – Picture 9

Pmi Kollmorgen S6m4h Servodisc Servo Disc Motor W/ Tach Tachometer & Encoder

US $74.99

San Marcos, Texas, United States
Jan 29th

Open on mobile:
QR code

This auction offers a PMI Kollmorgen S6M4H Servo Disc Motor that comes with a Tachometer and Quadrature Encoder. These motors were previously part of decommissioned systems and may have some surface corrosion and dirt from storage. They all have 8mm shaft diameter and 21 in-oz torque. The motors include attached leads that were cut for removal, but all wires are long enough to splice or directly connect. The motors also come with an aluminum hub attached to the shaft. Shipping within the continental United States is $12.00 for the first motor and $3.00 for each additional motor. These sales are considered final with no expressed or implied warranties. Buyers assume responsibility for safe usage and relieve the seller of any liability. Payments are made through PayPal and must be received within three days of the auction's end. The seller only ships to the buyer's "Paypal Confirmed Address," and sales are restricted to the U.S. and Canada. Included with each motor is a data sheet from PMI Kollmorgen and the encoder's pinout/wire key. Testing of each motor was performed using a bench power supply and an oscilloscope, which confirmed the A, A not, B, B not, Marker, and Marker not outputs. These motors were visually inspected for damage and run at various voltages, with a confirmed current draw of less than 0.5 amps. Additionally, tachometer output voltages were checked at each voltage and encoder pulse frequencies were matched to the tachometer voltage output.