PN7-915PT MOBILE ANTENNA, US $59.99 – Picture 0

PN7-915PT MOBILE ANTENNA, US $59.99 – Picture 1

Pn7-915pt Mobile Antenna

US $59.99

Shelbyville, Tennessee, United States
Jan 29th

Open on mobile:
QR code

Mobile Mark's RFID Panel Antennas are perfect for RFID systems, as well as other applications in the ISM band. They are designed to operate in close proximity to metal, which normally has a tendency to detune antennas. The PN7 Series antennas are available in circularly polar- ized (US models are RHCP; EU models are LHCP). With 7 dBic gain, these antennas provide significant perfor- mance improvements over a micro-sized patch. They can be mounted in any setting including directly against metal. This is useful for a variety of applications, but par- ticularly for mounting on forklifts. Model series PN7 antennas are small 6.75" H x 6.75" W x 2"D (172 mm x172mm x 50 mm) and attractive. The antennas are provided with 4 corner holes for mounting flush to a surface. An optional kit readily accommodates mounting to the load back rest of a forklift truck for pallet- ized scanning. The antenna is available in 2 styles, a direct N connector version, as well as a coaxial "Pigtail" version. The coax Model Number Models Description PN7-915-BLK US 902-928 MHz PN7-915PT-1C-BLK-12 US 902-928 MHz PN7-868-BLK EU 865 - 870 MHz PN7-868PT-1C-BLK-12 EU 865 - 870 MHz FL-MK Fork lift mounting kit For special configurations, please contact your sales representative. Specifications Frequency: PN7-915 series 902 - 928 MHz (US) PN7-868 series 865 - 870 MHz (EU) Gain: 7 dBic maximum Axial Ratio: 3 db Max VSWR: 1.5:1 max over range Impedance: 50 Ohm nominal Maximum Power: 20 Watts Beamwidth: 70 o elevation, 70 o azimuth Front-to-Back ratio: 15 dB or better Operating Temp: -40 o C to +85 o C Mounting: 4 Hole Corner Mount, Weight: 1.1 lbs (0.5 kg) Panel Antennas, 7 dBic RFID & ISM, Forklift ? Durable low profile design ? RF tuned for mounting directly against metal, perfect for forklift applications ? 7 dBic panel model for long range systems ? Optional mounting kit adapts antenna for metal settings such as forklifts, shelving, gates or racks Radome Size: 6.75" Hx 6.75" Wx 2" D (172 mm x172mm x 50 mm) Antenna Radome: Black ABS Termination: "PT" Models 1 ft (30 cm) RG-58/SMA male "N" Models Integral N female Optional Mounting: Model FL-MK mounting kit, allows PN7 mounting on forklift load backrest Shock & Vibration: EN 61373, IEEE 1478, MIL-810G TIA 329.2-C Water Ingress: IPx7 PN7 Series with Integral N pigtail version is supplied with an SMA, other connectors can be specified at time of order to match your applica- tion. Jumper cables can also be provided for either ver- sion to accommodate a variety of installations. The PN7 Series has a DC shorted front end and is com- patible with antenna sensing circuits found in the current generation of RFID readers. If your reader has a feature that requires a 10K ohm resistor, the PN7 antenna can be special ordered with this feature. PN7 Series with

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	MOBILE MARK
Model	PN7-915PT