+ Post new Ad
Pneumatic Industrial Vise "NEU VISE 1000", US $400 – Picture 0
Pneumatic Industrial Vise "NEU VISE 1000", US $400 – Picture 0

Pneumatic Industrial Vise "neu Vise 1000"

US $400

  • Edmonton, Alberta, Canada
  • Jun 4th
Open on mobile:
QR code
"Click here to view my full range of products" Can you switch from one job to the next in seconds? You can with the Neu Vise 1000. Want to move a job from one machine to another in seconds? No problem! Switch from one operation to the next in seconds? Yes! This type of flexibility will save you money! Check out the Video's Check out Vise Pressure Chart Solid Model for CAD/CAM of the 4inch BlackJaws (.x t) Solid Model for CAD/CAM of 4inch Blue Jaws (.x t) Solid Model for CAD/CAM of 4inch Red Jaws (.x t) The Neu Vise 1000 is a double jawed self-centering pneumatic vise with a max clamping pressure of 2350 lbs. It's made from 7075 aluminum hard anodized (type III) with comparable abrasion resistance to tool steel. 7075 also has a tensile strength of 8300lbs, higher than that of a cast iron vise. Weighing only 20lbs it's easy for anyone to take it in and out of a machine. When mounted on the All Neu Trunnion the air is feed through the trunnion and into the bottom of the vise leaving no messy airlines to get caught up or twisted off. One set of jaws can be used through prototype, production, engraving and inspection. To deliver good parts to the customer, consistency is key. Check out the different Jaws available! How to choose and machine jaws  Prototyping is expensive and often done on a separate machine from where full scale production takes place. This means a minimum of two setups to achieve production. Eliminate those wasted hours by taking your jaws with you into production. Do you want to do run separate day and night jobs on the same machine without tearing down? Just remove your jaws from your day job and insert ones for the night. Total stroke: .250inch               Vise accuracy: <.001 Vise can be mounted on a workbench, t-slot table, 4th axis, 5th axis or our All Neu Design Trunnion through a variety of mounting provisions.Current applications include machine vise, assembly vise, welding vise, robot grippers and inspection vise. Easy integration into the All Neu design Trunnions with internal airlines.

Directions

Similar products from Grips & Tongs

4 in. Swivel Bench Vise

4 in. Swivel Bench Vise

  • Northern Ohio, United States
  • Jun 4th
Wilton 3-1/2&#034; vise

Wilton 3-1/2" vise

  • Urbandale, Iowa, United States
  • Jun 4th
Vintage Iron Machinist Drill Press Vise 4&#039;&#039; Jaw bench/shop/work holding

Vintage Iron Machinist Drill Press Vise 4'' Jaw bench/shop/work holding

  • Rockledge, Florida, United States
  • Jun 4th
columbian 3 1/2 , m2 vise no 63-3

columbian 3 1/2 , m2 vise no 63-3

  • Reynoldsville, Pennsylvania, United States
  • Jun 4th
RIGGIO POWER VISE

RIGGIO POWER VISE

  • Joplin, Missouri, United States
  • Jun 4th
MINT WELDON AIRFLOW END MILL SHARPENING/GRINDING FIXTURE

MINT WELDON AIRFLOW END MILL SHARPENING/GRINDING FIXTURE

  • El Monte, California, United States
  • Jun 4th
Vintage PALMGREN 2.5&#034; Tilting Drill Press Machinist Milling VISE Chicago IL USA

Vintage PALMGREN 2.5" Tilting Drill Press Machinist Milling VISE Chicago IL USA

  • Concord, New Hampshire, United States
  • Jun 4th
Vintage PALMGREN DRILL PRESS Vise 1 1/2” JAWS-TO-1 5/8&#034; 1 Machinist Gunsmith

Vintage PALMGREN DRILL PRESS Vise 1 1/2” JAWS-TO-1 5/8" 1 Machinist Gunsmith

  • Sebastian, Florida, United States
  • Jun 4th
Ridgid B-Y-2-A Bench Mount Yoke Type Pipe Vise &amp; Ridgid Pipe Cutter 2A

Ridgid B-Y-2-A Bench Mount Yoke Type Pipe Vise & Ridgid Pipe Cutter 2A

  • Cocoa Beach, Florida, United States
  • Jun 4th
Wilton Vise 111055-111056 USA Maybe 4 1/2 With 360 Swivel Base

Wilton Vise 111055-111056 USA Maybe 4 1/2 With 360 Swivel Base

  • Fowler, California, United States
  • Jun 4th
Fiber Cover Magnetic Vise Jaws, 4&#034;

Fiber Cover Magnetic Vise Jaws, 4"

  • Duluth, Minnesota, United States
  • Jun 4th
1&#034; X 90 DEG(45 Per side) X 4 FLUTE CARBIDE CHAMFER END MILL FOR HARD MATERIALS

1" X 90 DEG(45 Per side) X 4 FLUTE CARBIDE CHAMFER END MILL FOR HARD MATERIALS

  • Ventura, California, United States
  • Jun 4th
Vintage DUNLAP 2-3/8&#034; Machinist Drill Press Table Vise,Metal Working Nice LQQK!

Vintage DUNLAP 2-3/8" Machinist Drill Press Table Vise,Metal Working Nice LQQK!

  • La Puente, California, United States
  • Jun 4th
LIANG YU 6&#034; SWIVEL MACHINE VISE

LIANG YU 6" SWIVEL MACHINE VISE

  • El Monte, California, United States
  • Jun 4th
Wilton Very Large Machinist Vise Tool

Wilton Very Large Machinist Vise Tool

  • South Hackensack, New Jersey, United States
  • Jun 4th
.7475 REAMER CARBIDE 6 FL X 9 1/2&#034; OVERALL FULLERTON BRAND NEW READY TO CUT!!!

.7475 REAMER CARBIDE 6 FL X 9 1/2" OVERALL FULLERTON BRAND NEW READY TO CUT!!!

  • Ventura, California, United States
  • Jun 4th
3 1/2 INCH TILTING MACHINIST VISE MILL OR DRILL GUNSMITH

3 1/2 INCH TILTING MACHINIST VISE MILL OR DRILL GUNSMITH

  • Modesto, California, United States
  • Jun 4th
Wilton Vise 3.5&#034; Jaws, Swivel

Wilton Vise 3.5" Jaws, Swivel

  • Berwick, Pennsylvania, United States
  • Jun 4th
Vintage Littco Littlestown USA No. 112 Anvil 3 1/2&#034; Bench Vise w/ Swivel Basel

Vintage Littco Littlestown USA No. 112 Anvil 3 1/2" Bench Vise w/ Swivel Basel

  • East Berlin, Pennsylvania, United States
  • Jun 4th
Vintage Wilton Scout USA 4&#034; Bench Vise w/ Swivel Base, Pipe Jaws &amp; Anvil

Vintage Wilton Scout USA 4" Bench Vise w/ Swivel Base, Pipe Jaws & Anvil

  • East Berlin, Pennsylvania, United States
  • Jun 4th

People who viewed this item also vieved

LATHE MILL MACHINIST TOOLS VERY LARGE Ready Tool Live Center G50 Retail $595

LATHE MILL MACHINIST TOOLS VERY LARGE Ready Tool Live Center G50 Retail $595

  • Morris Plains, New Jersey, United States
  • Jan 30th
NEW MT4 QUALITY CARBIDE DEAD CENTER MORSE TAPER #4 LATHE CENTER

NEW MT4 QUALITY CARBIDE DEAD CENTER MORSE TAPER #4 LATHE CENTER

  • Diamond Bar, California, United States
  • Jan 30th
MT1 Multi Point Revolving Center - Suitable for Mini Lathe Etc

MT1 Multi Point Revolving Center - Suitable for Mini Lathe Etc

  • DELHI, DELHI, India
  • Jan 30th
Abbott 6&#034; Aluminum Lathe Chuck Pie Jaws 60 deg serration x 1.5mm pitch SUG6PSTS

Abbott 6" Aluminum Lathe Chuck Pie Jaws 60 deg serration x 1.5mm pitch SUG6PSTS

  • Valley View, Pennsylvania, United States
  • Jan 30th
Abbott Lathe Chuck Jaw for 8&#034; Chuck TG8HDS NEW (29B) FRA

Abbott Lathe Chuck Jaw for 8" Chuck TG8HDS NEW (29B) FRA

  • Saint Louis, Missouri, United States
  • Jan 30th
MicroCentric PPC110D-2 Chuck- NOS - 2 Jaw Chuck

MicroCentric PPC110D-2 Chuck- NOS - 2 Jaw Chuck

  • Franklin, Kentucky, United States
  • Jan 30th
Cincinnati Tool Co No. 51 Super Jr C Clamp Machinist Tool USA

Cincinnati Tool Co No. 51 Super Jr C Clamp Machinist Tool USA

  • Stoughton, Massachusetts, United States
  • Jan 30th
Norpro 21 Magnetic Knife Bar-12&#034; MAGNETIC KNIFE BAR

Norpro 21 Magnetic Knife Bar-12" MAGNETIC KNIFE BAR

  • Brooklyn, New York, United States
  • Jan 30th
Norpro 22 Magnetic Knife Bar-18&#034; MAGNETIC KNIFE BAR

Norpro 22 Magnetic Knife Bar-18" MAGNETIC KNIFE BAR

  • Brooklyn, New York, United States
  • Jan 30th
Hardinge 60 - 1&#034; New Britain Collet 11/32&#034; Round

Hardinge 60 - 1" New Britain Collet 11/32" Round

  • West Warwick, Rhode Island, United States
  • Jan 30th
Hardinge 5EC B Master Expander Body Collet # 11410000000000

Hardinge 5EC B Master Expander Body Collet # 11410000000000

  • West Warwick, Rhode Island, United States
  • Jan 30th
Hardinge 5C 13/16&#034; Hex Collet w/ Internal Threads

Hardinge 5C 13/16" Hex Collet w/ Internal Threads

  • West Warwick, Rhode Island, United States
  • Jan 30th
ERON UR9 Right Angle Knee Iron Plate Precision Ground

ERON UR9 Right Angle Knee Iron Plate Precision Ground

  • Oxnard, California, United States
  • Jan 30th
Kennametal KM63NCMEF Face Plate Adapter for Rotary Indexers

Kennametal KM63NCMEF Face Plate Adapter for Rotary Indexers

  • Olathe, Kansas, United States
  • Jan 30th
BGA fixture with screws (x 4pcs) &amp; Bottom support clamp (x2pcs) for IR6000

BGA fixture with screws (x 4pcs) & Bottom support clamp (x2pcs) for IR6000

  • shenzhen, China
  • Jan 30th
Armstrong T-Slot Bolt Nuts 3/8&#034;

Armstrong T-Slot Bolt Nuts 3/8"

  • Costa Mesa, California, United States
  • Jan 30th
Armstrong T-Slot Bolt Nuts 5/8&#034;

Armstrong T-Slot Bolt Nuts 5/8"

  • Costa Mesa, California, United States
  • Jan 30th
Armstrong T-Slot Bolts 3/8&#034; x 3-1/2&#034; Long

Armstrong T-Slot Bolts 3/8" x 3-1/2" Long

  • Costa Mesa, California, United States
  • Jan 30th
ER25 MT2 M10 Drawbar CNC Milling Steel Material Collet Chuck Holder

ER25 MT2 M10 Drawbar CNC Milling Steel Material Collet Chuck Holder

  • shenzhen, China
  • Feb 14th
ER25 MT3 M12 Collet Chuck Holder Fixed CNC Millling

ER25 MT3 M12 Collet Chuck Holder Fixed CNC Millling

  • shenzhen, China
  • Feb 14th
ER20 MT2 M10 Drawbar CNC Milling Steel Material Collet Chuck Holder

ER20 MT2 M10 Drawbar CNC Milling Steel Material Collet Chuck Holder

  • shenzhen, China
  • Feb 14th
CNC Machine Accessory F Style A-Axis, Rotary Axis with 80mm 3-Jaw 230mm Track

CNC Machine Accessory F Style A-Axis, Rotary Axis with 80mm 3-Jaw 230mm Track

  • CN, China
  • Feb 14th
Tailstock Haas Hrt310 Nikken Tsudakoma Troyke 4th axis rotary table Clausing Cnc

Tailstock Haas Hrt310 Nikken Tsudakoma Troyke 4th axis rotary table Clausing Cnc

  • Rolla, Missouri, United States
  • Feb 14th
Kitagawa TBX200 NC 4th Axis Rotary Table

Kitagawa TBX200 NC 4th Axis Rotary Table

  • Lake Zurich, Illinois, United States
  • Feb 14th
Precision adjustable angle block Brown &amp; Sharpe

Precision adjustable angle block Brown & Sharpe

  • Baton Rouge, Louisiana, United States
  • Feb 18th
(9) PAIRS of Machinist Parallel s, All are about 6&#034; long x 1/2&#034; to 1 1/4&#034; Tall

(9) PAIRS of Machinist Parallel s, All are about 6" long x 1/2" to 1 1/4" Tall

  • Saint Clair, Michigan, United States
  • Feb 18th
Starrett V Blocks With Clamps Model # 278 With Box

Starrett V Blocks With Clamps Model # 278 With Box

  • Salt Lake City, Utah, United States
  • Feb 18th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies