Brand New Mini LED Cold Light Source Adopt CREE U2 10W LED Made in USA Most Powerful on Market Please send messages to choose color after paid (black, red, blue, silver), otherwise we will send black as default Brand new portable LED cold light source, most powerful on market. Can be used on all rigid endoscope and most flexible endoscope FEATURES: Powerful focused CREE U2 10W LED, enhanced by magnifying lens, super brightness and super long life (over 40000hours) Accurate 5000-5800K pure white cold light. By rotating the white collar, user can adjust the light intensity from 3 levels: off - 100% - 70% - 30% -off The light source can be placed on dock base to be charged, there is indicator on AC adaptor, light will change to green from red when charge is finished. There is charge hole on light source, so it can also be charged directly, it can keep working without battery under this mode, no worry about battery anymore. Use customized 26650 battery, 6800mAh super high capacity, provide 2 hours working time( 100% power). The battery is equipped with dual CMOS protection board so it can't be overcharged. The power cord is 2 meters long, with USB connection, so when operated outdoor, you can charge the light source with your laptop or mobile power supply (or any other device with USB port). The light source comes in a strong aluminum case, 2 rigid endoscope (max 8mm diameter and 190mm long) can be putted in besides the light source and accessories. Compatible with Storz, Wolf, Olympus, ACMI, Stryker, Dyonics, Levantec, Hawkeye and any other rigid endoscopes, also comptible with most flexible endoscopes. The whole body are made by aviation aluminum and stainless steel,100% water proof and soakable (only the adaptor can be autoclaved) Anodized surface, abrasion resistant, 4 colors can be chosen (black, blue, red and silver) Comes with 2 free heat isolation sponge covers 1 Year Warranty It is well know that 10W led is the most powerful portable led light source on market (although some seller say their product are 20W , but actually there is no 20W single LED at all). But due to capacity of battery and huge power assumption of 10W led, all portable light source can work less than 1 hour at 100% power, if they use true 10W led. So after a short time use, you must stop working and get the battery charged. EW-303 solve this perfectly: Out-door: Use customized 26650 battery with super capacity of 6800mAh, provide 2 hours working time at 100% power. Also can be charged by laptop, mobile power supply or any other device with USB connection to extend working time. * the light source is also compatible with 18650 battery, free 18605-26650 adaptor included (shown in the picture below). You can see the comparison of different batteries. Some similar product use AA or AAA size battery (max capacity is around 1000mAh) and say their product is 10W, that will make the light work no longer than 15 minutes, it's a lie, it's not 10W LED at all. In-door: The charging dock base provide a much more easier way to charge the battery, you don't need to open the light source and get the battery out (although you can), instead, just put the light source on the dock base and battery will be charged automatically, when battery is full, the indicator light on AC/DC adaptor will change to green and charging will be stopped automatically to protect battery. (The battery is self-protection too due to dual CMOS protection board) . And, the light source can be powered by AC/DC adaptor directly to work without battery. This provide unlimited continues working time. * We have 3 kinds of AC/DC adaptor (US standard, European standard and UK standard), we will send corresponding adaptors, if you have special requirement, please send message to inform. * The AC/DC adaptor is customized 4.2V 2A output with charging indicator, most similar power adaptor on market can't provide 2A current which is important for the light source to work under 100% power without battery, so when you need replacement power adaptor, please be sure it's 4.2V 2A output or buy it from us directly * The USB power cord is pure copper inside with ultra low internal resistance, bad USB cable will consume voltage a lot and make the light source run at low power output. It will also extend charging time. EW-303 comes with total 4pcs adaptors (3pcs for rigid endoscope and 1pcs for flexible endoscope), one sterilization cover ( the light source is soakable only, do not autoclave it), it is compatible with all rigid endoscope and most flexible endoscopes such as Olympus, Fuji etc. By rotating the magnetic on-off controller, user can easily change the light intensity between 100%, 70% and 30% . Due to the huge heat emission of 10W led, after 20-30mins use, the surface will be a little hot (far from hurt skin), we offer 2 free heat isolation cover. (Actually this is not necessary in most cased because EW-303 is well designed for heat dissipation.) EW-303 comes with a portable and strong aluminum case, everything get it's own place, you can also put 2 rigid endoscopes in the case (max 8mm diameter and 190mm long). Although use same 10W led, varies optical design results very different performance. EW-303 use 10W U2 LED instead of X-ML 10W LED which is used in EW-201, U2 LED is about 10% brighter than X-ML. The light path of EW-303 is deliberately designed and adopts optical quartz glass lens to enhance the light goes into the endoscope. Before EW-303 appears, EW-201 (also 10W light source) is the most powerful portable light source on market, now EW-303 is about 70% brighter than EW-201. In the picture shown below, EW-303 and EW-201 is being tested by a light intensity meter. Both are fully charged, 100% power, same place, using same 8mm 70 degree laryngoscope. Obviously, EW-303 is more brighter than EW-201 due to better LED and optical design. * Attention: The result in this test will differ a lot from different endoscope and environment. Technical Parameters: Light source — Cree U2 10W LED/ single super magnifying lens Light illumination / temperature — 400,000 LuX / 5000K-5800K Connection type — Compatible with all rigid endoscope and most flexible endoscops Operating temperature — 0°C-58°C (32°F-100°F) Operating humidity — 0 to 95% rh Power supply — 68000mAh rechargeable battery (included), 18650 battery compatible (adaptor included) AC/DC adaptor: 220/110V input, 4.2V 2A output USB cord: 2m long, pure copper Average battery life — 2 hours (at max power), 4 hours (at 70% power) Water proof: 100% Dimensions — diam. 36mm x 150mm Net weight - 300g (10oz) Case: 300*200*80(mm) Package: 1X LED cold light source 2X Sponge cover 4X Adaptors 1X Sterilization cover 1X Rechargeable battery 6800mAh 1X Charge dock base 1X Charger (110V-240V) 4.2V 2A 1X Aluminum case SHIPPING & HANDING • We will offer combined shipping cost for multi-item purchase, please email to ask. • We shipped the package out within 48hours after payment received except weekend & holidays. • Insurance are included in the postage, if item got lost during shipping, we will send new. • We will put a mark of "gift" on the package. • It will take about 10-14 days to arrive US, Australia and most European countries. • Package can be tracked online. PAYMENT Method • PayPal is the best. • Bank transfer is also ok but it's not recommended because it will take much longer. RETURN POLICY • Return is acceptable in 7 days of receipt and please remember to contact us before arrange the return, DO NOT send item to the address on the package, we won't get it and you will not be refunded. • Return item must be in original conditions, include package. • For defective or wrong items, we will offer full refund, for any other reason,postage is non-refundable. FDA REGULATION STATEMENT "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item." If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health: http://www.fda.gov/cdrh/devadvice/ http://www.fda.gov/cdrh/industry/support/index.html Phone number: 800.638.2041 email: dsmica@cdrh.fda.gov Thank you for your cooperation. Distributor: Shenzhen Kuaikefeixun Trading Limited. 2#15D, zhongshan Garden, Luohu Shenzhen, China 518000 Endoscopeworld Right Reserved Your partner for managing your online business On Dec-01-14 at 11:08:01 PST, seller added the following information:
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
