+ Post new Ad
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 0
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 1
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 2
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 3
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 4
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 5
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 6
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 7
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 8
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 0
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 1
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 2
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 3
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 4
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 5
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 6
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 7
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck, US $295.00 – Picture 8

Pratt & Whitney 3at Collets With Collet Closer And Four Jaw Chuck

US $295.00

  • United States
  • Jan 30th
Open on mobile:
QR code
Up for your consideration, I have a nice set of collets by Pratt & Whitney. Collets are in good to very good condition with some tarnish from sitting around for almost two years. Threads are very good on all the collets, including the collet closer. Closer has a hard rubber knob with some light scratches. Sizes are as follows: 5/16, (2) 1/8, 5/32, 3/16, 11/64, 13/64, 7/32, 1/4, 9/32, 19/64, 5/16, 21/64, 3/8, 25/64, (2) 7/16 and 15/32. You will get a total of 18 collets. The 4" chuck was made by Union MFG. Co. and is in very good condition! All the Jaws move freely, unfortunately, there's no key with it. I ended up grinding down another key that was just over sized in order to check the chuck. Free shipping in the lower 48 States only. Thank you!
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Pratt & Whitney
Country/Region of Manufacture United States

Directions

Similar products from Metalworking Collets

(5) Assorted 1-5/8" Cone Collets, Camco Ballas Morrison, Lathe Grinder ID/OD

(5) Assorted 1-5/8" Cone Collets, Camco Ballas Morrison, Lathe Grinder ID/OD

  • Hopkins, Minnesota, United States
  • Jan 30th
CLEAN (6) Pieces Milling Collets, 2" Diameter x 3.5" Length, 1", 1-1/4", 1-1/2"

CLEAN (6) Pieces Milling Collets, 2" Diameter x 3.5" Length, 1", 1-1/4", 1-1/2"

  • Hopkins, Minnesota, United States
  • Jan 30th
(8) Pieces Milling Chuck Collets, 1.25" OD x 2.75" L, 1/4 3/8 5/16 5/8 3/4 7/8

(8) Pieces Milling Chuck Collets, 1.25" OD x 2.75" L, 1/4 3/8 5/16 5/8 3/4 7/8

  • Hopkins, Minnesota, United States
  • Jan 30th
NICE Sheffer 1-5/8" Cone Collet Size, HEX 1-1/16", Threaded Lathe Grinder ID/OD

NICE Sheffer 1-5/8" Cone Collet Size, HEX 1-1/16", Threaded Lathe Grinder ID/OD

  • Hopkins, Minnesota, United States
  • Jan 30th
(30) HARDINGE 21SC COLLETS 32nds 64ths LATHE GRINDER ID/OD Browne Sharpe

(30) HARDINGE 21SC COLLETS 32nds 64ths LATHE GRINDER ID/OD Browne Sharpe

  • Hopkins, Minnesota, United States
  • Jan 30th
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-3/8", Threaded, Lathe Grinder ID/OD

NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-3/8", Threaded, Lathe Grinder ID/OD

  • Hopkins, Minnesota, United States
  • Jan 30th
(6) Pieces Milling Chuck Collets, 1" OD x 2.35" Length, 3/8" 1/2" 3/4" 7/8"

(6) Pieces Milling Chuck Collets, 1" OD x 2.35" Length, 3/8" 1/2" 3/4" 7/8"

  • Hopkins, Minnesota, United States
  • Jan 30th
(4) Clean HARDINGE 5C SQUARE COLLETS ALL DIFFERENT LATHE GRINDER ID/OD HEX

(4) Clean HARDINGE 5C SQUARE COLLETS ALL DIFFERENT LATHE GRINDER ID/OD HEX

  • Hopkins, Minnesota, United States
  • Jan 30th
(4) Hardinge 1-5/8" Cone Collet, S16 Removable Type Pad, Lathe Grinder, Britian

(4) Hardinge 1-5/8" Cone Collet, S16 Removable Type Pad, Lathe Grinder, Britian

  • Hopkins, Minnesota, United States
  • Jan 30th
(16) 5C Collets, Brass Emergency and Step, Hardinge, 5DS, LATHE CNC

(16) 5C Collets, Brass Emergency and Step, Hardinge, 5DS, LATHE CNC

  • Hopkins, Minnesota, United States
  • Jan 30th
7pc Lot South Bend 5C Round Collets USA

7pc Lot South Bend 5C Round Collets USA

  • Lorain, Ohio, United States
  • Jan 30th
Washington Collet size 3/8

Washington Collet size 3/8

  • Spring, Texas, United States
  • Jan 30th
12 Pc ER20 Spring Collets Set Collet ER-20 ER 20 New

12 Pc ER20 Spring Collets Set Collet ER-20 ER 20 New

  • San Gabriel, California, United States
  • Jan 30th
23 Pc ER40 Spring Collets Set Collet ER-40 ER 40 New

23 Pc ER40 Spring Collets Set Collet ER-40 ER 40 New

  • San Gabriel, California, United States
  • Jan 30th
15 Pc ER25 Spring Collets Set Collet ER-25 ER 25 New

15 Pc ER25 Spring Collets Set Collet ER-25 ER 25 New

  • San Gabriel, California, United States
  • Jan 30th
COLLIS 3/8" STYLE A END MILL ENDMILL TOOL HOLDER W/ 1-1/4" SHANK

COLLIS 3/8" STYLE A END MILL ENDMILL TOOL HOLDER W/ 1-1/4" SHANK

  • Chino, California, United States
  • Jan 30th
15 Pc ER40 Spring Collets Set Collet R8 Chuck ER-40 New

15 Pc ER40 Spring Collets Set Collet R8 Chuck ER-40 New

  • San Gabriel, California, United States
  • Jan 30th
10 Pc ER25 Spring Collet Set Collets + NMTB 30 Chuck

10 Pc ER25 Spring Collet Set Collets + NMTB 30 Chuck

  • San Gabriel, California, United States
  • Jan 30th
10 Pc ER25 Spring Collets Set Collet R8 Chuck ER-25 New

10 Pc ER25 Spring Collets Set Collet R8 Chuck ER-25 New

  • San Gabriel, California, United States
  • Jan 30th
10 Pc ER25 Spring Collet Set Collets + NMTB 40 Chuck

10 Pc ER25 Spring Collet Set Collets + NMTB 40 Chuck

  • San Gabriel, California, United States
  • Jan 30th

People who viewed this item also vieved

PAIR OF 10” INCH HOLD DOWNS MACHINIST TOOLS (LUFKIN 902)

PAIR OF 10” INCH HOLD DOWNS MACHINIST TOOLS (LUFKIN 902)

  • Toms River, New Jersey, United States
  • Feb 24th
Southbend lathe milling attachment for 9 or 10 in lathe

Southbend lathe milling attachment for 9 or 10 in lathe

  • Woodbury, Connecticut, United States
  • Feb 24th
5 1/8" DIAMETER DRIVER DRIVE DOG FACE PLATE MACHINIST LATHE TOOL 1 1/2" x 8 TPI

5 1/8" DIAMETER DRIVER DRIVE DOG FACE PLATE MACHINIST LATHE TOOL 1 1/2" x 8 TPI

  • United States
  • Feb 24th
2" Vintage C-Clamp Made in USA

2" Vintage C-Clamp Made in USA

  • Silverdale, Washington, United States
  • Mar 2nd
MITEE BITE CLAMPS LOT OF 34 PCS'S

MITEE BITE CLAMPS LOT OF 34 PCS'S

  • Guelph, Ontario, Canada
  • Mar 2nd
One Lot of C Clamps 3568-147

One Lot of C Clamps 3568-147

  • Hillsdale, New Jersey, United States
  • Mar 2nd
Cardinal Speed-Vise Base Plate 4" Vise Plate # 4-B

Cardinal Speed-Vise Base Plate 4" Vise Plate # 4-B

  • Grantville, Kansas, United States
  • Mar 2nd
Cardinal Speed-Vise Jaws # 4-CJP

Cardinal Speed-Vise Jaws # 4-CJP

  • Grantville, Kansas, United States
  • Mar 2nd
VISE GRIPS PETERSEN DEWITT 11R LOCKING PLIERS LOT OF 2

VISE GRIPS PETERSEN DEWITT 11R LOCKING PLIERS LOT OF 2

  • Arlington, Texas, United States
  • Mar 2nd
5" GATOR Lathe Chuck 6 Jaw TRU ADJUSTABLE + ADAPTER 1-103-0500

5" GATOR Lathe Chuck 6 Jaw TRU ADJUSTABLE + ADAPTER 1-103-0500

  • Columbus, Ohio, United States
  • Mar 3rd
6" CNC Power 3 Jaw Lathe Chuck 1.5 x 60+ 3 Soft Jaws

6" CNC Power 3 Jaw Lathe Chuck 1.5 x 60+ 3 Soft Jaws

  • Carrollton, Ohio, United States
  • Mar 3rd
1/4" Keyless Drill Chuck- Aircraft,Aviation Tools

1/4" Keyless Drill Chuck- Aircraft,Aviation Tools

  • Somerset, Kentucky, United States
  • Mar 3rd
MACHINIST TOOLS LATHE MILL NICE NICE Machinist Live Center for Lathe

MACHINIST TOOLS LATHE MILL NICE NICE Machinist Live Center for Lathe

  • Morris Plains, New Jersey, United States
  • Mar 5th
Rohm 93439 Type 604H Revolving Tailstock Center

Rohm 93439 Type 604H Revolving Tailstock Center

  • Buffalo, New York, United States
  • Mar 5th
Lathe Live Center 14103

Lathe Live Center 14103

  • Terre Haute, Indiana, United States
  • Mar 5th
Lot of 12 1/4" WEDGELOCK Clecos

Lot of 12 1/4" WEDGELOCK Clecos

  • South Gate, California, United States
  • Jun 1st
Hardinge HV-4 5C Indexer

Hardinge HV-4 5C Indexer

  • Manchester, Connecticut, United States
  • Jun 2nd
Vintage Sears Machinists Jack #9 1000lb capacity USA Made

Vintage Sears Machinists Jack #9 1000lb capacity USA Made

  • Snowflake, Arizona, United States
  • Jun 2nd
Machinist Material Hold Block

Machinist Material Hold Block

  • Paris, Ohio, United States
  • May 27th
MAGNETIC V BLOCK, 2 SIDED - 1" & 2"

MAGNETIC V BLOCK, 2 SIDED - 1" & 2"

  • Charlotte, North Carolina, United States
  • May 27th
2 V-BLOCKS 2 5/8 x 1 1/4 x 2 machinist tools grinding milling

2 V-BLOCKS 2 5/8 x 1 1/4 x 2 machinist tools grinding milling

  • Hadley, Pennsylvania, United States
  • May 27th
15" Nikken CNC Trunion Rotary Table_4th / 5th Axis_5 Axis HMC VMC Index

15" Nikken CNC Trunion Rotary Table_4th / 5th Axis_5 Axis HMC VMC Index

  • Grand Rapids, Michigan, United States
  • May 27th
Ellis 6" Dividing Head with Tailstock & Chuck

Ellis 6" Dividing Head with Tailstock & Chuck

  • Matawan, New Jersey, United States
  • May 27th
Devlieg Air Lift Table 20"x20"

Devlieg Air Lift Table 20"x20"

  • Rockford, Illinois, United States
  • May 28th
Young Bros. Young Bros 08362 36 Piece Hand Cut Stamp Combination Letter and

Young Bros. Young Bros 08362 36 Piece Hand Cut Stamp Combination Letter and

  • USA, United States
  • Jun 1st
Young Bros. Young Bros 05362 36 Piece Hand Cut Stamp Combination Letter and

Young Bros. Young Bros 05362 36 Piece Hand Cut Stamp Combination Letter and

  • USA, United States
  • Jun 1st
3 A&C-max ER16 COLLET CHUCK EXTENSIONS w/ 5/8" SHANKS - #SSH5/8-ECH10S-35T

3 A&C-max ER16 COLLET CHUCK EXTENSIONS w/ 5/8" SHANKS - #SSH5/8-ECH10S-35T

  • Covina, California, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies