+ Post new Ad
Precise (Fischer) S 56 Z R8 High Speed Spindle Motor, very clean and complete, US $4800 – Picture 0
Precise (Fischer) S 56 Z R8 High Speed Spindle Motor, very clean and complete, US $4800 – Picture 0

Precise (fischer) S 56 Z R8 High Speed Spindle Motor, Very Clean And Complete

US $4800

  • Palmdale, California, United States
  • Nov 7th
Open on mobile:
QR code
 I have a beautiful almost new condition Precise brand high speed mill spindle motor for sale.   Serial #0416 as seen on the photograph of the certificate of accuracy.   It features an R8 collet.  This is from a private owner who purchased it from the inventory of a tool supply company and it is likely unused or only used as a demo unit, so it is a very rare find for a spindle motor of this vintage.   This motor is tested working.  I ran the motor briefly on my mill and it works and sounds excellent, no bearing noise at 25% full power.  (per the instructions seen on the Certificate of Accuracy I did not take it up higher as I would have had to run it in for a while before doing that since it has not been run recently.)   The maximum speed is 45,000 RPM. The Precise company is now owned by Fischer and is still in business today. Enjoy and happy bidding.   -Mique

Directions

Similar products from Shafts

60000rpm 1.2kw ER11 spindle motor& 1.5KW 1phase 220v CNC kits

60000rpm 1.2kw ER11 spindle motor& 1.5KW 1phase 220v CNC kits

  • DongGuan, China
  • Nov 8th
1.2KW 24000RPM ER11 80MM spindle motor&2.2kw 3phase 220V VFD CNC kits

1.2KW 24000RPM ER11 80MM spindle motor&2.2kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 8th
1.5kw 24000rpm ER11 65mm spindle motor&2.2kw 3phase 220V VFD CNC kits

1.5kw 24000rpm ER11 65mm spindle motor&2.2kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 8th
1.5kw 24000rpm ER11 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

1.5kw 24000rpm ER11 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 8th
1.5kw 24000rpm ER16 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

1.5kw 24000rpm ER16 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 8th
BT50-45° 45 degree outer screw 4 Petal Clamp Pull claw for cnc Spindle NEW

BT50-45° 45 degree outer screw 4 Petal Clamp Pull claw for cnc Spindle NEW

  • Shenzhen ,guangdong, China
  • Nov 8th
2.2kw 3HP 24000rpm ER20 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

2.2kw 3HP 24000rpm ER20 80mm spindle motor&2.2kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 7th
3kw 4hp 18000rpm ER20 105mm spindle motor&3kw 3phase 220V VFD CNC kits

3kw 4hp 18000rpm ER20 105mm spindle motor&3kw 3phase 220V VFD CNC kits

  • DongGuan, China
  • Nov 7th
3kw 4hp 18000rpm ER20 spindle motor&3kw 3phase 220V VFD inverter CNC kits

3kw 4hp 18000rpm ER20 spindle motor&3kw 3phase 220V VFD inverter CNC kits

  • DongGuan, China
  • Nov 7th
300W 12000RPM DC 12V-48V Spindle Motor + Adjustable Power Supply + Mount 52mm

300W 12000RPM DC 12V-48V Spindle Motor + Adjustable Power Supply + Mount 52mm

  • shenzhen, China
  • Nov 7th
Grinding Spindle BIENNE B-8 8mm

Grinding Spindle BIENNE B-8 8mm

  • Sopot, Bulgaria
  • Nov 7th
0.75kw 1HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 5A

0.75kw 1HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 5A

  • DongGuan, China
  • Nov 6th
1.5kw 2HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 7A

1.5kw 2HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 7A

  • DongGuan, China
  • Nov 6th
5.5kw 7.5HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 25A

5.5kw 7.5HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 25A

  • DongGuan, China
  • Nov 6th
7.5kw 10HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 33A

7.5kw 10HP 1000HZ VFD Inverter Frequency converter 1ph 220v to 3ph 0-220v 33A

  • DongGuan, China
  • Nov 6th
0.75kw 1HP 1000HZ VFD Inverter Frequency converter 3ph 380v to 3ph 0-380v 2.7A

0.75kw 1HP 1000HZ VFD Inverter Frequency converter 3ph 380v to 3ph 0-380v 2.7A

  • DongGuan, China
  • Nov 6th
Pope Machinery Style P18938A CNC Lathe Spindle Assembly 3-1/4" OD X 17" OAL

Pope Machinery Style P18938A CNC Lathe Spindle Assembly 3-1/4" OD X 17" OAL

  • Middlebury, Indiana, United States
  • Nov 6th
2.2kw 3HP 1000HZ VFD Inverter Frequency converter 3ph 380v to 3ph 0-380v 5.5A

2.2kw 3HP 1000HZ VFD Inverter Frequency converter 3ph 380v to 3ph 0-380v 5.5A

  • DongGuan, China
  • Nov 5th
3kw 4HP 1000HZ VFD Inverter Frequency converter 3ph 380v input 3ph 0-380v 8.0A

3kw 4HP 1000HZ VFD Inverter Frequency converter 3ph 380v input 3ph 0-380v 8.0A

  • DongGuan, China
  • Nov 5th
4kw 5HP 1000HZ VFD Inverter Frequency converter 3ph 380v to 3ph 0-380v 9.5A

4kw 5HP 1000HZ VFD Inverter Frequency converter 3ph 380v to 3ph 0-380v 9.5A

  • DongGuan, China
  • Nov 5th

People who viewed this item also vieved

rego-fix swiss 3932.00650 6.5-6.0mm 1/4" DS/ER32 Collet Nut Coolant Seal Ring

rego-fix swiss 3932.00650 6.5-6.0mm 1/4" DS/ER32 Collet Nut Coolant Seal Ring

  • Chicago, Illinois, United States
  • Jan 30th
rego-fix swiss 3932.01000 10-9.5mm DS/ER32 Collet Nut Coolant Seal Ring

rego-fix swiss 3932.01000 10-9.5mm DS/ER32 Collet Nut Coolant Seal Ring

  • Chicago, Illinois, United States
  • Jan 30th
Lyndex Corp. HSK 40A-0375-75 / HSK 40A-SL2 3/8-75 Endmill Holder - AB20 - AB22

Lyndex Corp. HSK 40A-0375-75 / HSK 40A-SL2 3/8-75 Endmill Holder - AB20 - AB22

  • Bloomfield, Connecticut, United States
  • Jan 30th
VALENITE TL# 260795-T17 BORING BAR TL26123034-T1

VALENITE TL# 260795-T17 BORING BAR TL26123034-T1

  • Cleveland, Ohio, United States
  • Jan 30th
Kurt D-50 AngLock Swivel Base.

Kurt D-50 AngLock Swivel Base.

  • South Hackensack, New Jersey, United States
  • Jan 30th
Kurt D-40 AngLock Swivel Base.

Kurt D-40 AngLock Swivel Base.

  • South Hackensack, New Jersey, United States
  • Jan 30th
1" Global CNC Boring Bar Turret Tool Holder, 51.40 1-1/2 TJ, VDI 40 mm ID Daewoo

1" Global CNC Boring Bar Turret Tool Holder, 51.40 1-1/2 TJ, VDI 40 mm ID Daewoo

  • Franksville, Wisconsin, United States
  • Jan 30th
(3) DRILL BUSHINGS TYPE H 29/64"

(3) DRILL BUSHINGS TYPE H 29/64"

  • Galax, Virginia, United States
  • Jan 30th
CNC MACHINE PRECISION TOOLHOLDER LYNDEX PULL STUD B30-6000 new

CNC MACHINE PRECISION TOOLHOLDER LYNDEX PULL STUD B30-6000 new

  • mississauga, Ontario, Canada
  • Jan 30th
HPI Pioneer CAT40 1/4 End Mill Holder 6.00" Coolant Thru DIN AD/B Jet **NEW**

HPI Pioneer CAT40 1/4 End Mill Holder 6.00" Coolant Thru DIN AD/B Jet **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
JACOBS DRILL CHUCK ARBOR 1/2" SS X 1JT

JACOBS DRILL CHUCK ARBOR 1/2" SS X 1JT

  • Wadley, Alabama, United States
  • Jan 30th
Kennametal Collet Chuck Style MT2DA301156 - Stock # 0982

Kennametal Collet Chuck Style MT2DA301156 - Stock # 0982

  • Dundee, Florida, United States
  • Jan 30th
SHARS 2" 90 Degree Face Shell Mill TPG 322 Carbide Insert

SHARS 2" 90 Degree Face Shell Mill TPG 322 Carbide Insert

  • Saint Charles, Illinois, United States
  • Jan 30th
Facemill Cutter Mitsubishi BSX400R0408E- 2 pieces & 40 inserts

Facemill Cutter Mitsubishi BSX400R0408E- 2 pieces & 40 inserts

  • Griffith, Indiana, United States
  • Jan 30th
7 new MODERN ABRASIVE 3/4" x 5/8" x 1/4" A22 D2 Burnt Orange Mounted Points USA

7 new MODERN ABRASIVE 3/4" x 5/8" x 1/4" A22 D2 Burnt Orange Mounted Points USA

  • United States
  • Jan 30th
13 new MODERN ABRASIVE 3/8" x 1-1/4" x 1/4" W179-D2 Burnt Orange Mounted Points

13 new MODERN ABRASIVE 3/8" x 1-1/4" x 1/4" W179-D2 Burnt Orange Mounted Points

  • United States
  • Jan 30th
MTFNR 16-4 Cuttig tool

MTFNR 16-4 Cuttig tool

  • Vermilion, Ohio, United States
  • Jan 30th
15 - KENNAMETAL KTFR - 163 INSERT TN-32 TOOL HOLDER

15 - KENNAMETAL KTFR - 163 INSERT TN-32 TOOL HOLDER

  • Naperville, Illinois, United States
  • Jan 30th
Aloris AXA-35 Dovetail Chuck Collet Drilling Holder for Tool Post Made in USA

Aloris AXA-35 Dovetail Chuck Collet Drilling Holder for Tool Post Made in USA

  • Columbus, Ohio, United States
  • Jan 30th
NEW CXA #10 KNURLING TURNING & FACING HOLDER LATHE TOOL POST 250-010

NEW CXA #10 KNURLING TURNING & FACING HOLDER LATHE TOOL POST 250-010

  • Huntington Beach, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies