US $190
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Unbranded |
| MPN | Does Not Apply | ||
| Block Type | V-Block |
Directions
Similar products from Supporting Blocks & Sets
(5.1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Block Pair Set) - HHIP
(10cm - 1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Single) - HHIP 3402-0007
HOMEMADE ANGLE PLATE GRIND FIXTURE TOOLMAKER MACHINIST HERMANN SCHMIDT BOX
Chuck Jaws - Serrated (set of 3)
Precision Magnetic V block 65 x 65 x 50 mm - 2.5 Inch Set Of 2 Pc Both Side V..
Magnetic v block 65X65X50mm HARDENED & GROUNDED high power set of 2 piece..
Vintage Starrett No 271 Matched Machinist V Blocks
2 MACHINISTS Hardened RIGHT ANGLE BLOCK
HHIP 3402-0054 1-2-3 Blocks Set 1 Hole
L.S.Starrett Co. No. 568 Machinist Toolmaker V Block NO CLAMP USA 3/8-16 holes
4 Magnetic Parallels 2 pairs 1" x 2" x 4"
(1-2-3 Tin Coated Block Set, 3402-0905) - HHIP 3402-0905 1-2-3 Tin Coated
(1-2-3 Block Set, 3402-0005) - HHIP 3402-0005 1-2-3 Block Set, 23 Holes
Vintage Enron 1-2-3 Blocks Configure In Many Ways Counterbored Holes
Brown & Sharpe V-Block and Clamp No. 750-2 - Hardened Steel - Precision Ground
Vintage Starret No 567 Machinist V Block
BROWN AND SHARPE 749-1 V - BLOCK SET WITH CLAMP
5" SINE BAR 1" WIDTH 6" OVERALL LENGTH
MACHINIST MADE SET UP BLOCKS Tool & Die Maker Machinist Tool Maker Tool
People who viewed this item also vieved
SHOP FOX STEELEX MT1 PRECISION TRIPLE BEARING LIVE CENTER HEAVY DUTY NEW NIB
NEW SURPLUS 1.00" STRAIGHT SHANK DEAD CENTER with 1.375" Point Diameter
NEW SURPLUS MOHAWK 3/4" DEAD CENTER .750" Shank X 4.50" OAL (5698-3462)
KITAGAWA B-210 3 JAW 10" CHUCK
BROWN & SHARPE NO. 00 MINIATURE DRILL CHUCK - FOR LATHE? - BELT DRIVE
4" Landis Double Head Bolt Threader - Model 32C - with 32R Lanco Heads
New Hi Quality Toolmakers Parallel Clamps 5" Jaws X 3.1/2" Opening : Heavy Duty
Strong Hand Quick Acting 6.5 Scissor Action Shark Clamp
CINCINNATI TOOL CO. NO. 56 SUPER JR. C-CLAMP - 2-1/2" CAPACITY
Hardinge 16C A2-5 Extra Depth Step Chuck Closer 4" Hole Size
CAT 50 TG 100 COLLET CHUCK LOT QTY 2 3-1/2" PRO (LOC1198A)
CAT 50 TG 100 COLLET CHUCK LOT QTY 2 5-1/2" PRO (LOC1198A)
NEW KENNAMETAL REDUCER SLEEVE 32MM TO 1/2"
Vintage Spring Collet Round Grip Lathe Milling CNC Machinist Chuck Tool
MACHINIST LATHE MILL TOOL ANGLE PLATE MACHINIST SET UP FIXTURE
MACHINIST LATHE MILL TOOL NICE UNUSUAL MILLING SET UP FIXTURE
Vintage Craftsman Vise 3 INCH OPENING - 2 3/8" WIDE - 8 1/4" LONG
Abbott PH1501A 1/16" x 90° Serrated Aluminum Chuck Jaws, Style J, Set of 3 (13A)
Abbott KT-12300-P 1.5mm x 60° Serrated Soft Chuck Jaws, Steel, Set of 3 (14B)
Kipp Pull Knob Indexing Plunger, Size 2, Style A, Hardened, 03090-1206.07, D2
Lehmann Rotary Table Lathe Center EA-407.1B w/ Swiss Made Module PL 2943
Bellows 10" Pneumatic Rotary Feed Table Model BRET 10C
Pratt & Whitney 30” Dia. Plain Motorized Rotary Table
Vintage 1947 Wilton Bullet Vise 4 1/2 inch Model 9450 Restored
VINTAGE "WILTON" TOOL CORP. BULLET VISE - No. 3 - WITH SWIVEL BASE - NICE SHAPE
Palmgren Tilting compound Swivel 4" Vise
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies