+ Post new Ad
PRECISION SINE PLATE - 5" S.P. -5.0 - MACHINIST GRINDER TOOL - INSTRUMENTS, US $340 – Picture 0
PRECISION SINE PLATE - 5" S.P. -5.0 - MACHINIST GRINDER TOOL - INSTRUMENTS, US $340 – Picture 0

Precision Sine Plate - 5" S.p. -5.0 - Machinist Grinder Tool - Instruments

US $340

  • United States
  • Feb 15th
Open on mobile:
QR code
Payment is through PayPal only, with confirmed addresses preferred. We ship every Monday, Wednesday, and Friday within the lower 48 states. Unfortunately, we do not offer international transactions or shipping to P.O. boxes, Alaska, Hawaii, APO, or FPO addresses. We take pride in the accuracy of our descriptions, but opinions on condition may vary. Take a look at the pictures and decide for yourself. If there are any issues, please email us before opening a case - we can always work something out. This Precision Sine Plate is a must-have for any machinist or grinder. Measuring 5 inches in length, the S.P. 5.0 is a valuable addition to your toolkit. Check out the pictures to see the item you will receive - we sell only what is pictured in the auction.

Directions

Similar products from Fittings & Plates

MACHINIST TOOLS LATHE LARGE Follow Rest for Lathe q

MACHINIST TOOLS LATHE LARGE Follow Rest for Lathe q

  • Morris Plains, New Jersey, United States
  • Feb 15th
MACHINIST TOOLS LATHE Large Ground and Hardened Angle Plate Fixture

MACHINIST TOOLS LATHE Large Ground and Hardened Angle Plate Fixture

  • Morris Plains, New Jersey, United States
  • Feb 15th
MACHINIST TOOL LATHE 15" Lathe Face Plate

MACHINIST TOOL LATHE 15" Lathe Face Plate

  • Morris Plains, New Jersey, United States
  • Feb 15th
MACHINIST TOOLS LATHE LARGE Steady Rest for Lathe i

MACHINIST TOOLS LATHE LARGE Steady Rest for Lathe i

  • Morris Plains, New Jersey, United States
  • Feb 15th
MACHINIST TOOL LATHE 11" - T Slot Face Plate D - 1 - 3

MACHINIST TOOL LATHE 11" - T Slot Face Plate D - 1 - 3

  • Morris Plains, New Jersey, United States
  • Feb 15th
MACHINIST TOOLS LATHE LARGE Steady Rest for Lathe k

MACHINIST TOOLS LATHE LARGE Steady Rest for Lathe k

  • Morris Plains, New Jersey, United States
  • Feb 15th
MACHINIST TOOL LATHE 10" Lathe Face Plate 1 1/2" Center

MACHINIST TOOL LATHE 10" Lathe Face Plate 1 1/2" Center

  • Morris Plains, New Jersey, United States
  • Feb 15th
Brown & Sharpe Sine Plate 31/2 x 6"

Brown & Sharpe Sine Plate 31/2 x 6"

  • Lake George, Colorado, United States
  • Feb 15th
Stanley Tilting Angle Plate Table # 8883A

Stanley Tilting Angle Plate Table # 8883A

  • Sacramento, California, United States
  • Feb 15th
Sine bars . 2.5" 5.0"

Sine bars . 2.5" 5.0"

  • Woodbridge, Connecticut, United States
  • Feb 15th
HARDINGE MODEL H-4 5C COLLET INDEXING FIXTURE W/ HARDINGE 1/2" 5C COLLET

HARDINGE MODEL H-4 5C COLLET INDEXING FIXTURE W/ HARDINGE 1/2" 5C COLLET

  • Ellington, New York, United States
  • Feb 15th
NICE! PRECISION 3" TOOLMAKERS VICE

NICE! PRECISION 3" TOOLMAKERS VICE

  • Ellington, New York, United States
  • Feb 15th
Angle plate

Angle plate

  • Bronson, Florida, United States
  • Feb 14th
10 " Adjustable Tilting Angle Plate T-Slots Fixture Mill Grind

10 " Adjustable Tilting Angle Plate T-Slots Fixture Mill Grind

  • Bronx, New York, United States
  • Feb 14th
ANGEL TILTING TABLE 5"x7"

ANGEL TILTING TABLE 5"x7"

  • Brooklyn, New York, United States
  • Feb 14th
6" Sine Plate with rail an 7 standards

6" Sine Plate with rail an 7 standards

  • Bronson, Florida, United States
  • Feb 14th
Hardinge Model HV-4 5C Collet Index Indexing Fixture tool die machine metal shop

Hardinge Model HV-4 5C Collet Index Indexing Fixture tool die machine metal shop

  • Lyons, Illinois, United States
  • Feb 14th
PARALLEL BLOCKS (4) 1"X2"X3" MACHINIST TOOLMAKER SURFACE GRINDER HARDENED GROUND

PARALLEL BLOCKS (4) 1"X2"X3" MACHINIST TOOLMAKER SURFACE GRINDER HARDENED GROUND

  • Clinton Township, Michigan, United States
  • Feb 14th
44" x 20" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

44" x 20" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld Jig

  • Grand Rapids, Michigan, United States
  • Feb 14th
70" x 33" x 11" T-Slot Steel Welding 5 T-Slotted Table Cast Iron Layout Plate

70" x 33" x 11" T-Slot Steel Welding 5 T-Slotted Table Cast Iron Layout Plate

  • Grand Rapids, Michigan, United States
  • Feb 14th

People who viewed this item also vieved

R8 Collet 3/8"

R8 Collet 3/8"

  • Edgecomb, Maine, United States
  • Feb 13th
KENNAMETAL / ERICKSON QC30EM018175 QUICK CHANGE 3/16" END MILL ADAPTER

KENNAMETAL / ERICKSON QC30EM018175 QUICK CHANGE 3/16" END MILL ADAPTER

  • Roanoke, Virginia, United States
  • Feb 13th
LYNDEX Flex Collet 1/8" TG-100 V/FLNG 100-008 [1980]

LYNDEX Flex Collet 1/8" TG-100 V/FLNG 100-008 [1980]

  • Saint Louis, Missouri, United States
  • Feb 13th
32 Pc. Machinist's Lot: Center drills, End Mills, etc.

32 Pc. Machinist's Lot: Center drills, End Mills, etc.

  • Glastonbury, Connecticut, United States
  • Feb 22nd
Knu-Vise V-400 Manual Hold Down Toggle Clamp Handle

Knu-Vise V-400 Manual Hold Down Toggle Clamp Handle

  • Tracy, California, United States
  • Feb 22nd
De-Sta-Co 548 3149832 Vertical Handle Hold Down Clamp

De-Sta-Co 548 3149832 Vertical Handle Hold Down Clamp

  • Rochester, Indiana, United States
  • Feb 22nd
8 USED VINTAGE CENTERS AND CUTTERS

8 USED VINTAGE CENTERS AND CUTTERS

  • Fullerton, California, United States
  • Feb 23rd
USED VINTAGE SPRING LOADED FOLDING CENTER

USED VINTAGE SPRING LOADED FOLDING CENTER

  • Fullerton, California, United States
  • Feb 23rd
Lot of Lathe Dead Centers

Lot of Lathe Dead Centers

  • Pittsburgh, Pennsylvania, United States
  • Feb 23rd
Vintage Reed MFG Co. No. 203 R Bench Vise w/ 3"-Jaw Width 5" Opening

Vintage Reed MFG Co. No. 203 R Bench Vise w/ 3"-Jaw Width 5" Opening

  • Olmsted Falls, Ohio, United States
  • Feb 23rd
PALMGREN 2-7/16" Tilting Machinest Vice; Jaws open to 2-5/8"

PALMGREN 2-7/16" Tilting Machinest Vice; Jaws open to 2-5/8"

  • Palmetto, Florida, United States
  • Feb 23rd
Precision Vice

Precision Vice

  • Bronson, Florida, United States
  • Feb 23rd
Parlec Chuck C40-12MC4 CAT40 Power Milling Chuck 2.69" Bore Depth 1.25" ID NEW

Parlec Chuck C40-12MC4 CAT40 Power Milling Chuck 2.69" Bore Depth 1.25" ID NEW

  • Niagara Falls, New York, United States
  • Feb 24th
ER-16 BT40 SPRING COLLET CHUCK-PRO (3900-8604)

ER-16 BT40 SPRING COLLET CHUCK-PRO (3900-8604)

  • Chino, California, United States
  • Feb 24th
ER-32 BT40 SPRING COLLET CHUCK (3900-7618)

ER-32 BT40 SPRING COLLET CHUCK (3900-7618)

  • Chino, California, United States
  • Feb 24th
Okuma Cadetmate Unclamp Cylinder assembly

Okuma Cadetmate Unclamp Cylinder assembly

  • Spencerport, New York, United States
  • Mar 25th
EARTH-CHAIN EZ LIFT 2000 kgs & 1000 kgs both for one low price!

EARTH-CHAIN EZ LIFT 2000 kgs & 1000 kgs both for one low price!

  • Los Alamitos, California, United States
  • Mar 25th
JERGENS #24709 Insert Tool for Keylocking Inserts 3/4" Made in USA

JERGENS #24709 Insert Tool for Keylocking Inserts 3/4" Made in USA

  • Crystal Lake, Illinois, United States
  • Mar 25th
Set of three machinist 5" discs with 1" hole.

Set of three machinist 5" discs with 1" hole.

  • Chicago, Illinois, United States
  • May 24th
Starrett V Blocks & Clamps

Starrett V Blocks & Clamps

  • Clyde, Ohio, United States
  • May 24th
Set of (2) Magnetic Chuck Blocks, Parallels, ENCO 285-2050, 54003, 1" x 2" x 4"

Set of (2) Magnetic Chuck Blocks, Parallels, ENCO 285-2050, 54003, 1" x 2" x 4"

  • Hadley, Pennsylvania, United States
  • May 24th
ELLIS 6-1/2" INDEXING DIVIDING HEAD w/ INDEX PLATES

ELLIS 6-1/2" INDEXING DIVIDING HEAD w/ INDEX PLATES

  • Covina, California, United States
  • May 24th
BRIDGEPORT 12" ROTORY TABLE

BRIDGEPORT 12" ROTORY TABLE

  • El Monte, California, United States
  • May 24th
Haas Index Control box

Haas Index Control box

  • Springfield, Missouri, United States
  • May 24th
Used Hardinge 1 m Emergency Collet

Used Hardinge 1 m Emergency Collet

  • Bristol, Connecticut, United States
  • May 28th
Lot of 14 vintage Collet 6 mm for watchmaker lathe. Boley, Telco, Corey

Lot of 14 vintage Collet 6 mm for watchmaker lathe. Boley, Telco, Corey

  • zagreb,10040, croatia, Croatia, Republic of
  • May 28th
Hardinge 16C 4" Regular Depth Chuck Closer, Used

Hardinge 16C 4" Regular Depth Chuck Closer, Used

  • New York, New York, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies