+ Post new Ad
Precision Twist 31/64" Jobber Length NAS 907 135 Degree Split Point, US $6.05 – Picture 0
Precision Twist 31/64" Jobber Length NAS 907 135 Degree Split Point, US $6.05 – Picture 1
Precision Twist 31/64" Jobber Length NAS 907 135 Degree Split Point, US $6.05 – Picture 0
Precision Twist 31/64" Jobber Length NAS 907 135 Degree Split Point, US $6.05 – Picture 1

Precision Twist 31/64" Jobber Length Nas 907 135 Degree Split Point

US $6.05

  • Summerville, South Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Precision Twist 31/64" Jobber Length NAS 907 135 Degree Split Point Since 1952, Precision Twist has applied, experience, knowledge and craftsmanship to its high speed steel and solid carbide drill lines. Today, Precision Twist is recognized as a leading supplier of quality cutting tools in the industry. Small Parts carries an extensive line of Precision Twist Products. High speed steel (HSS) can withstand higher temperatures without losing its temper (hardness). This property allows HSS to cut faster than high carbon steel, hence the name high speed steel. At room temperature HSS and high carbon steel have an equivalent hardness; only at elevated temperatures does HSS become advantageous. Surface Feet Per Minute (SFM) Ratings as follows: Steels < 350 BHN (Brinnel Hardness Number) = 45 SFM, Cast Iron < 320 BHN = 55 SFM, Titanium < 270 BHN = 50 SFM, Nickel < 150 BHN = 50 SFM. The Split-Point, or Crankshaft Point, has gained widespread use and is applied to both 118 and 135 Degree included point angles. Its main advantages are the ability to reduce thrust and eliminate walking at the drill piont. This is a distinct advantage when the drill is used in a portable drill or in drilling applications where bushings cannot be used. The split-point also has two positive rake cutting edges extending to the center of the drill, which can assist as a chipbreaker to produce small chips which can readily be ejected. Brand Name Precision Twist Mfr Part # DRL-NAS31/64-01 Material Type High Speed Steel Finish Types Black Oxide Pkg Qty 1 Drill Point Split Flute Length 4 3/8  inches Flute Type Spiral Number of Flutes 2 Outside Diameter 0.4843  inches Overall Length 5 7/8  inches Shank Material Type High Speed Steel Shank Type Round Shank Width 31/64  inches Size 31/64" System of Measurement Inch UNSPSC Code 20121600   Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.

Directions

Similar products from Jobber Drills

Precision Twist 15/32&#034; Jobber Length NAS 907 135 Degree Split Point 4 5/16&#034;

Precision Twist 15/32" Jobber Length NAS 907 135 Degree Split Point 4 5/16"

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist #37 Jobber Length Drill HSS TiN Coated 1 7/16&#034; Flute 2 1/2&#034; L

Precision Twist #37 Jobber Length Drill HSS TiN Coated 1 7/16" Flute 2 1/2" L

  • Summerville, South Carolina, United States
  • Jan 30th
Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg

  • Summerville, South Carolina, United States
  • Jan 30th
Klein Tools 29 Pc Jobber Length Drill Bit Set Model 53000

Klein Tools 29 Pc Jobber Length Drill Bit Set Model 53000

  • West Palm Beach, Florida, United States
  • Jan 30th
Machinist tool tools 59/64&#034; Taper Length HSS Drill, Brand PTD New Made in U.S.A.

Machinist tool tools 59/64" Taper Length HSS Drill, Brand PTD New Made in U.S.A.

  • British Columbia, Canada
  • Jan 30th
50 Aircraft Aviaton Quick-Change Drill Bits ***DOTCO***

50 Aircraft Aviaton Quick-Change Drill Bits ***DOTCO***

  • United States
  • Jan 30th
TITEX PLUS JOBBER DRILL A1166 MM 4.4 HAUSN N DIN 1897 VHM-K10 ( 2 )

TITEX PLUS JOBBER DRILL A1166 MM 4.4 HAUSN N DIN 1897 VHM-K10 ( 2 )

  • Springfield, New Hampshire, United States
  • Jan 30th
AVIATION EXCESSED DRILL BITS #30 6 inch

AVIATION EXCESSED DRILL BITS #30 6 inch

  • Molena, Georgia, United States
  • Jan 30th
Precision Twist Cobalt Steel Drill Bit #13 135 Degree Split Point 2 5/16&#034; Flute

Precision Twist Cobalt Steel Drill Bit #13 135 Degree Split Point 2 5/16" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist 19/64&#034; L/H Jobber Drill 118 Deg HSS 3 1/16&#034; Flute 4 3/8&#034; L

Precision Twist 19/64" L/H Jobber Drill 118 Deg HSS 3 1/16" Flute 4 3/8" L

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist #8 Jobber Length NAS 907 135 Deg Split Point 2 7/16&#034; Flute

Precision Twist #8 Jobber Length NAS 907 135 Deg Split Point 2 7/16" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Evacut 7/16&#034; HSS Jobber Length Drill Bits (3 ea

Evacut 7/16" HSS Jobber Length Drill Bits (3 ea

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill, 300SB-17/64, 17/64&#034; Type B, HSS, Aircraft Jobber Drill Bits 12ea

Michigan Drill, 300SB-17/64, 17/64" Type B, HSS, Aircraft Jobber Drill Bits 12ea

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill, 300SB-15/64, 15/64&#034;, HSS, Jobber Length Drill Bits - 12 each

Michigan Drill, 300SB-15/64, 15/64", HSS, Jobber Length Drill Bits - 12 each

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill, 300LH-7, #7, HSS, Left Hand Jobber Length Drill Bits -12 each

Michigan Drill, 300LH-7, #7, HSS, Left Hand Jobber Length Drill Bits -12 each

  • Chillicothe, Missouri, United States
  • Jan 30th
DORMER 5 PC #40, #30, #21 &amp; #19 HS &amp; PTD M42 12&#034; DRILL BIT SET AIRCRAFT TOOLS

DORMER 5 PC #40, #30, #21 & #19 HS & PTD M42 12" DRILL BIT SET AIRCRAFT TOOLS

  • San Antonio, Texas, United States
  • Jan 30th
Triumph Twist Drill 012526, 13/32&#034;, HSS Jobber Length Drill Bits - 6 each

Triumph Twist Drill 012526, 13/32", HSS Jobber Length Drill Bits - 6 each

  • Chillicothe, Missouri, United States
  • Jan 30th
DORMER 4 PC #30, #21 &amp; #10 HSCO, CO &amp; HS 12&#034; DRILL BIT SET AIRCRAFT TOOLS

DORMER 4 PC #30, #21 & #10 HSCO, CO & HS 12" DRILL BIT SET AIRCRAFT TOOLS

  • San Antonio, Texas, United States
  • Jan 30th
Chicago-Latrobe Series 150, 44018, 9/32&#034;, HSS, Jobber Length Drill Bits - 4 each

Chicago-Latrobe Series 150, 44018, 9/32", HSS, Jobber Length Drill Bits - 4 each

  • Chillicothe, Missouri, United States
  • Jan 30th
Chicago-Latrobe Series 150, 44032, 1/2&#034;, HSS, Jobber Length Drill Bits - 3 each

Chicago-Latrobe Series 150, 44032, 1/2", HSS, Jobber Length Drill Bits - 3 each

  • Chillicothe, Missouri, United States
  • Jan 30th

People who viewed this item also vieved

Snow Chain Repair Tool, 32&#034; long, made in USA

Snow Chain Repair Tool, 32" long, made in USA

  • Easton, Pennsylvania, United States
  • May 8th
Carbide Drill Bits 9/64&#034; (.140&#034;) Diameter (4ea)

Carbide Drill Bits 9/64" (.140") Diameter (4ea)

  • Boca Raton, Florida, United States
  • May 9th
4 NEW FULLERTON CARBIDE DRILLS .0295 2&#034; X 3/8&#034; FLUTE 135 POINT 1/8&#034; SHANK 1325

4 NEW FULLERTON CARBIDE DRILLS .0295 2" X 3/8" FLUTE 135 POINT 1/8" SHANK 1325

  • Tekamah, Nebraska, United States
  • May 9th
Peddinghaus Corp 45.0 / 9347, 45mm, 4MT, HSS, Coolant Thru Taper Shank Drill Bit

Peddinghaus Corp 45.0 / 9347, 45mm, 4MT, HSS, Coolant Thru Taper Shank Drill Bit

  • Chillicothe, Missouri, United States
  • May 23rd
XL Drill Bits - MT Shanks - 88 Pieces - SKU1961

XL Drill Bits - MT Shanks - 88 Pieces - SKU1961

  • Port Sydney, ON, Canada
  • May 24th
F.B. TOOLS Speedicut Bits Lot of 4 plus 1 broken

F.B. TOOLS Speedicut Bits Lot of 4 plus 1 broken

  • Des Moines, Iowa, United States
  • May 25th
33/64&#034; Drill, Westward 4UM59A Silver &amp; Demming

33/64" Drill, Westward 4UM59A Silver & Demming

  • Lincoln, Nebraska, United States
  • May 26th
3/4&#034; Drill, Westward 4UM74A Silver &amp; Demming

3/4" Drill, Westward 4UM74A Silver & Demming

  • Lincoln, Nebraska, United States
  • May 26th
8 Lawson Carbide masonry drill bits 1/2 inch 3/8 inch, 5/16 inch, 1/4 inch

8 Lawson Carbide masonry drill bits 1/2 inch 3/8 inch, 5/16 inch, 1/4 inch

  • Washington, New Jersey, United States
  • May 27th
NEW! VRK 47/64&#034; &amp; ECLIPSE 63/64&#034; HSS EXTRA LENGTH DRILLS

NEW! VRK 47/64" & ECLIPSE 63/64" HSS EXTRA LENGTH DRILLS

  • Covina, California, United States
  • Jun 23rd
Diager 7.1mm (9/32&#034;) Carbide Tipped Long Reach Twist Drill Bit - NOS

Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

  • Hillsboro, Ohio, United States
  • Jun 23rd
1/2&#034; EXTRA LONG DRILL BITS, 12&#034; LENGTH, 9&#034; FLUTE, COBALT, HSCO Made in the USA

1/2" EXTRA LONG DRILL BITS, 12" LENGTH, 9" FLUTE, COBALT, HSCO Made in the USA

  • Milwaukee, Wisconsin, United States
  • Jun 23rd
Allied # 1TA-29/32&#034; Spade Drill Insert # 131T-0029 Unit # 1 Used

Allied # 1TA-29/32" Spade Drill Insert # 131T-0029 Unit # 1 Used

  • Coventry, Rhode Island, United States
  • May 25th
KOOLTWIST CARBIDE TIPPED COOLANT FED DRILL 1&#034; RESHARPENED

KOOLTWIST CARBIDE TIPPED COOLANT FED DRILL 1" RESHARPENED

  • Cadiz, Kentucky, United States
  • May 26th
HANNIBAL 18mm CARBIDE TIPPED STRAIGHT FLUTE COOLANT FED DRILL (RESHARPENED)

HANNIBAL 18mm CARBIDE TIPPED STRAIGHT FLUTE COOLANT FED DRILL (RESHARPENED)

  • Cadiz, Kentucky, United States
  • May 26th
P letter Drill NOS Stub MORSE Screw Machine length HSS USA

P letter Drill NOS Stub MORSE Screw Machine length HSS USA

  • Pensacola, Florida, United States
  • May 28th
Screw Machine Drills 1/16&#034; HSS USA Qty 12 &lt;346&gt;

Screw Machine Drills 1/16" HSS USA Qty 12 <346>

  • Saint Louis, Missouri, United States
  • May 28th
Screw Machine Drills 1/16&#034; HSS USA Qty 10 &lt;346&gt;

Screw Machine Drills 1/16" HSS USA Qty 10 <346>

  • Saint Louis, Missouri, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies