+ Post new Ad
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 0
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 1
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 2
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 3
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 4
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 5
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 6
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 0
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 1
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 2
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 3
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 4
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 5
Precision Twist Drill 1-7/64" Morse Taper No.4 MT Shank Drill Bit 12-1/2" OAL, US $65.00 – Picture 6

Precision Twist Drill 1-7/64" Morse Taper No.4 Mt Shank Drill Bit 12-1/2" Oal

US $65.00

  • Newark, New Jersey, United States
  • Feb 27th
Open on mobile:
QR code
Precision Twist Drill 1-7/64" ball tip Morse Taper No.4 MT Shank Drill Bit  12-1/2" over all length. May possibly need some sharpening flat end. Check out all photos as reference since this item is not refundable.

Directions

Similar products from Drill Bits with Tapered Shanks

4 TAPER SHANK Drill Bits HSS 29/64" USA CLE-FORGE 229327

4 TAPER SHANK Drill Bits HSS 29/64" USA CLE-FORGE 229327

  • Marshall, Michigan, United States
  • Feb 28th
Morse 1-9/64" Drill Bit 4MT, 4 Morse Taper 13" OAL ((#D211))

Morse 1-9/64" Drill Bit 4MT, 4 Morse Taper 13" OAL ((#D211))

  • Green Bay, Wisconsin, United States
  • Feb 28th
Chicago Latrobe 1-5/32" Drill Bit 4MT, 4 Morse Taper 11-3/4" OAL ((#D207))

Chicago Latrobe 1-5/32" Drill Bit 4MT, 4 Morse Taper 11-3/4" OAL ((#D207))

  • Green Bay, Wisconsin, United States
  • Feb 28th
CELFOR 1-25/32" Drill Bit 4MT, 4 Morse Taper 14-3/4" OAL ((#D212))

CELFOR 1-25/32" Drill Bit 4MT, 4 Morse Taper 14-3/4" OAL ((#D212))

  • Green Bay, Wisconsin, United States
  • Feb 28th
National 1-21/64" Drill Bit 4MT, 4 Morse Taper 14" OAL ((#D214))

National 1-21/64" Drill Bit 4MT, 4 Morse Taper 14" OAL ((#D214))

  • Green Bay, Wisconsin, United States
  • Feb 28th
Morse 1-39/64" Drill Bit 4MT, 4 Morse Taper 16" OAL ((#D209))

Morse 1-39/64" Drill Bit 4MT, 4 Morse Taper 16" OAL ((#D209))

  • Green Bay, Wisconsin, United States
  • Feb 28th
Chicago Latrobe 1-5/64" Drill Bit 4MT, 4 Morse Taper 12-3/4" OAL ((#D208))

Chicago Latrobe 1-5/64" Drill Bit 4MT, 4 Morse Taper 12-3/4" OAL ((#D208))

  • Green Bay, Wisconsin, United States
  • Feb 28th
ATM 1-5/8" Drill Bit 4MT, 4 Morse Taper 15-1/2" OAL ((#D213))

ATM 1-5/8" Drill Bit 4MT, 4 Morse Taper 15-1/2" OAL ((#D213))

  • Green Bay, Wisconsin, United States
  • Feb 28th
Chicago Latrobe 1-57/64" Drill Bit 4MT, 4 Morse Taper 16-1/4" OAL ((#D202))

Chicago Latrobe 1-57/64" Drill Bit 4MT, 4 Morse Taper 16-1/4" OAL ((#D202))

  • Green Bay, Wisconsin, United States
  • Feb 28th
Morse 1-19/32" Drill Bit 4MT, 4 Morse Taper 15-1/2" OAL ((#D210))

Morse 1-19/32" Drill Bit 4MT, 4 Morse Taper 15-1/2" OAL ((#D210))

  • Green Bay, Wisconsin, United States
  • Feb 28th
GTD Ampco 1-19/32" Drill Bit HSS 5MT, 5 Morse Taper 17" OAL Ball Tip

GTD Ampco 1-19/32" Drill Bit HSS 5MT, 5 Morse Taper 17" OAL Ball Tip

  • Newark, New Jersey, United States
  • Feb 27th
Cle-Forge Morse Taper Drill Bit 1-23/64" MT4 13 3/4 over all lentgh shank

Cle-Forge Morse Taper Drill Bit 1-23/64" MT4 13 3/4 over all lentgh shank

  • Newark, New Jersey, United States
  • Feb 27th
Cle Forge 1-5/32" Drill Bit 4MT, 4 Morse Taper 17"over all length long flute

Cle Forge 1-5/32" Drill Bit 4MT, 4 Morse Taper 17"over all length long flute

  • Newark, New Jersey, United States
  • Feb 27th
CLE FORGE 1-1/8" HSS Drill Bit Long flutes Morse Taper #4 Shank MT4 4MT 11" OAL

CLE FORGE 1-1/8" HSS Drill Bit Long flutes Morse Taper #4 Shank MT4 4MT 11" OAL

  • Newark, New Jersey, United States
  • Feb 27th
CAPITAL 1-5/8" Drill Bit HSS MT4, Morse Taper 13-1/2" OAL. Ball tip. England

CAPITAL 1-5/8" Drill Bit HSS MT4, Morse Taper 13-1/2" OAL. Ball tip. England

  • Newark, New Jersey, United States
  • Feb 27th
2 23/32" 2.718" HSS CORE DRILL #4 MORSE TAPER 4 FLUTE

2 23/32" 2.718" HSS CORE DRILL #4 MORSE TAPER 4 FLUTE

  • Hummelstown, Pennsylvania, United States
  • Feb 27th
REPUBLIC DRILL HSS #3 MORSE TAPER OIL HOLE DRILL 3/4" DIAMETER QTY 3 PIECE

REPUBLIC DRILL HSS #3 MORSE TAPER OIL HOLE DRILL 3/4" DIAMETER QTY 3 PIECE

  • Hummelstown, Pennsylvania, United States
  • Feb 27th
morse taper drill

morse taper drill

  • Selma, North Carolina, United States
  • Feb 27th
National High Speed Steel Taper Shank Drill Bit HSS 17/8 x 16" OAL Lathe Mill

National High Speed Steel Taper Shank Drill Bit HSS 17/8 x 16" OAL Lathe Mill

  • Bakersfield, California, United States
  • Feb 27th
47/64" #2MT Morse taper shank drill bit HSS good condition

47/64" #2MT Morse taper shank drill bit HSS good condition

  • Alden, New York, United States
  • Feb 27th

People who viewed this item also vieved

DRIVE MASTER DRILL BIT Titanium Coated 7/16 -1/4 SHANK No.9816 Lot of 5

DRIVE MASTER DRILL BIT Titanium Coated 7/16 -1/4 SHANK No.9816 Lot of 5

  • New Bedford, Massachusetts, United States
  • Jan 30th
Sandvik Corodrill 870-2100-21L25-5 exchangeable tip drill 21 mm + 870-2100-21-PM

Sandvik Corodrill 870-2100-21L25-5 exchangeable tip drill 21 mm + 870-2100-21-PM

  • Slaskie, Poland
  • Jan 30th
"GUHRING" Chip Clearing Twist Drill Bit 25/64"

"GUHRING" Chip Clearing Twist Drill Bit 25/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Michigan Drill HSS 118 degree 12" Extra Long 1/2" Reduced shank Drill 21/32

Michigan Drill HSS 118 degree 12" Extra Long 1/2" Reduced shank Drill 21/32

  • McMinnville, Tennessee, United States
  • Feb 13th
1-1/4X9-1/2X15 COBALT DRILL (LW1862-1)

1-1/4X9-1/2X15 COBALT DRILL (LW1862-1)

  • Miami, Florida, United States
  • Feb 13th
1-1/4X9X12 DRILL WITH TANG (LW1859-1)

1-1/4X9X12 DRILL WITH TANG (LW1859-1)

  • Miami, Florida, United States
  • Feb 13th
WESTWARD 16 Piece Pc 35,000 RPM 1/4" Shank Single Cut Carbide Bur Set 2H

WESTWARD 16 Piece Pc 35,000 RPM 1/4" Shank Single Cut Carbide Bur Set 2H

  • Saint Louis, Missouri, United States
  • Feb 13th
MISUBISHI CARBIDE DRILL

MISUBISHI CARBIDE DRILL

  • Eureka, Illinois, United States
  • Feb 13th
Garr Tool Coolant Drill 8.2mm

Garr Tool Coolant Drill 8.2mm

  • Eureka, Illinois, United States
  • Feb 13th
Komet 1.25" Insert Drill ABS 50

Komet 1.25" Insert Drill ABS 50

  • Johnson City, New York, United States
  • Feb 16th
Komet 1.875" Insert Drill ABS 63

Komet 1.875" Insert Drill ABS 63

  • Johnson City, New York, United States
  • Feb 16th
Komet 2.00" Insert Drill ABS 63

Komet 2.00" Insert Drill ABS 63

  • Johnson City, New York, United States
  • Feb 16th
CLE-LINE C23473 Screw Mach Drill,HSS,Blk Oxide,17/64 In

CLE-LINE C23473 Screw Mach Drill,HSS,Blk Oxide,17/64 In

  • United States
  • Feb 21st
GUHRING 9005520038600 Screw Mach Drill,Parabolic,HSS,3.86mm

GUHRING 9005520038600 Screw Mach Drill,Parabolic,HSS,3.86mm

  • United States
  • Feb 21st
Lot of 20 Dormer Drill Bits A230 "B" Split Point HSS Screw Machine Length (D4)

Lot of 20 Dormer Drill Bits A230 "B" Split Point HSS Screw Machine Length (D4)

  • De Soto, Missouri, United States
  • Feb 21st
Cleveland Twist 5/8" 2 Flute Ball End Mill (L697/C42660) Qty:3

Cleveland Twist 5/8" 2 Flute Ball End Mill (L697/C42660) Qty:3

  • Clearwater, Florida, United States
  • Feb 27th
HIGH SPEED STEEL DRILLS - PARTIALLY USED

HIGH SPEED STEEL DRILLS - PARTIALLY USED

  • Fort Myers, Florida, United States
  • Feb 27th
Precision Twist C15R10P High Speed Steel Jobber Length Drill Bit Set Uncoated (

Precision Twist C15R10P High Speed Steel Jobber Length Drill Bit Set Uncoated (

  • United States
  • Feb 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies