+ Post new Ad
Precision Twist F Taper Length Drill 118 Deg HSS L 6 1/4" Flute 3 7/8" [Misc.], US $14.55 – Picture 0
Precision Twist F Taper Length Drill 118 Deg HSS L 6 1/4" Flute 3 7/8" [Misc.], US $14.55 – Picture 0

Precision Twist F Taper Length Drill 118 Deg Hss L 6 1/4" Flute 3 7/8" [misc.]

US $14.55

  • Summerville, South Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Specifications for this item Brand Name Precision Twist Mfr Part # DRL-TLD-F-01 Material Type High Speed Steel Finish Types Uncoated (Bright) Pkg Qty 1 Cutting Angle 118  Degrees Drill Point Conventional Flute Length 3 7/8  inches Flute Type Spiral Number of Flutes 2 Outside Diameter 0.2570  inches Overall Length 6 1/4  inches Shank Material Type High Speed Steel Shank Type Round Shank Width .257  inches Size F System of Measurement Letter UNSPSC Code 20121600   Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.

Directions

Similar products from Drill Bits with Tapered Shanks

25/32" Drill W&B Hercules H.S. No. 2 MT

25/32" Drill W&B Hercules H.S. No. 2 MT

  • Maumee, Ohio, United States
  • Jan 30th
3/4" Cleveland Forge HS Drill No. 2MT

3/4" Cleveland Forge HS Drill No. 2MT

  • Maumee, Ohio, United States
  • Jan 30th
47/64" Drill Morse brand H.S no.2 MT shank

47/64" Drill Morse brand H.S no.2 MT shank

  • Maumee, Ohio, United States
  • Jan 30th
Twist Drills - # No.2 Morse Taper LOT of 9 pcs. .53-.981 set

Twist Drills - # No.2 Morse Taper LOT of 9 pcs. .53-.981 set

  • Saint Johnsbury, Vermont, United States
  • Jan 30th
CLEVELAND TAPER SHANK TWIST DRILL 1-3/16" TAPERED SHANK HSS USA

CLEVELAND TAPER SHANK TWIST DRILL 1-3/16" TAPERED SHANK HSS USA

  • San Diego, California, United States
  • Jan 30th
1-1/8" CHICAGO-LATROBE DOUBLE CIRCLE Taper Shank Drill Bit HS Machinist, tool

1-1/8" CHICAGO-LATROBE DOUBLE CIRCLE Taper Shank Drill Bit HS Machinist, tool

  • San Diego, California, United States
  • Jan 30th
1-1/32" UTD HS 68 TAPER SHANK 2 FLUTE DRILL BIT

1-1/32" UTD HS 68 TAPER SHANK 2 FLUTE DRILL BIT

  • San Diego, California, United States
  • Jan 30th
National 1-11/16" Drill Bit 5MT, 5 Morse Taper 17-1/2" OAL ((#D112))

National 1-11/16" Drill Bit 5MT, 5 Morse Taper 17-1/2" OAL ((#D112))

  • Green Bay, Wisconsin, United States
  • Jan 30th
National 1-33/64" Drill Bit 5MT, 5 Morse Taper 16-1/2" OAL ((#D113))

National 1-33/64" Drill Bit 5MT, 5 Morse Taper 16-1/2" OAL ((#D113))

  • Green Bay, Wisconsin, United States
  • Jan 30th
National 1-5/8" Drill Bit 5MT, 5 Morse Taper 17-1/4" OAL ((#D114))

National 1-5/8" Drill Bit 5MT, 5 Morse Taper 17-1/4" OAL ((#D114))

  • Green Bay, Wisconsin, United States
  • Jan 30th
1-13/16" Drill Bit 5MT, 5 Morse Taper 15-1/2" OAL Unbranded ((#D115))

1-13/16" Drill Bit 5MT, 5 Morse Taper 15-1/2" OAL Unbranded ((#D115))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Cle-Forge 1-7/8" Drill Bit 5MT, 5 Morse Taper 15-1/4" OAL ((#D116))

Cle-Forge 1-7/8" Drill Bit 5MT, 5 Morse Taper 15-1/4" OAL ((#D116))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Morse 2" Drill Bit 5MT, 5 Morse Taper 18-1/2" OAL ((#D117))

Morse 2" Drill Bit 5MT, 5 Morse Taper 18-1/2" OAL ((#D117))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Morse 1-7/8" Drill Bit 5MT, 5 Morse Taper 16-1/4" OAL ((#D118))

Morse 1-7/8" Drill Bit 5MT, 5 Morse Taper 16-1/4" OAL ((#D118))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Precision Twist Taper Length Drill Parabolic #45 135 Deg HSS S/P L 4 1/4"

Precision Twist Taper Length Drill Parabolic #45 135 Deg HSS S/P L 4 1/4"

  • Summerville, South Carolina, United States
  • Jan 30th
Black Panther 2" Drill Bit 5MT, 5 Morse Taper 17-1/4" OAL ((#D93))

Black Panther 2" Drill Bit 5MT, 5 Morse Taper 17-1/4" OAL ((#D93))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Black Panther 1-33/64" Drill Bit 5MT, 5 Morse Taper 17" OAL ((#D94))

Black Panther 1-33/64" Drill Bit 5MT, 5 Morse Taper 17" OAL ((#D94))

  • Green Bay, Wisconsin, United States
  • Jan 30th
1-11/16" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL Unbranded Japan ((#D95))

1-11/16" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL Unbranded Japan ((#D95))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Nachi Forge 1-27/32" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL Japan ((#D96))

Nachi Forge 1-27/32" Drill Bit 5MT, 5 Morse Taper 17-3/4" OAL Japan ((#D96))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Nachi Forge 1-9/16" Drill Bit 5MT, 5 Morse Taper 17-1/4" OAL Japan ((#D97))

Nachi Forge 1-9/16" Drill Bit 5MT, 5 Morse Taper 17-1/4" OAL Japan ((#D97))

  • Green Bay, Wisconsin, United States
  • Jan 30th

People who viewed this item also vieved

COOLANT FED GUN DRILLING SET UP W/ CA2 QUICK CHANGE TOOL POST + 5/8" X 16" DRILL

COOLANT FED GUN DRILLING SET UP W/ CA2 QUICK CHANGE TOOL POST + 5/8" X 16" DRILL

  • Ellington, New York, United States
  • Feb 21st
STERLING .4376" X 25" CARBIDE TIPPED GUN DRILL COOLANT THRU

STERLING .4376" X 25" CARBIDE TIPPED GUN DRILL COOLANT THRU

  • Ellington, New York, United States
  • Feb 21st
STERLING 9MM X180MM CARBIDE TIPPED GUN DRILL COOLANT THRU

STERLING 9MM X180MM CARBIDE TIPPED GUN DRILL COOLANT THRU

  • Ellington, New York, United States
  • Feb 21st
CLEVELAND TWIST 3/8X10X11-1/4 COBALT DRILL (AA4606-4)

CLEVELAND TWIST 3/8X10X11-1/4 COBALT DRILL (AA4606-4)

  • Miami, Florida, United States
  • Feb 26th
CLEVELAND TWIST 3/32X4 TORCH TIP DRILL (AA4612-24)

CLEVELAND TWIST 3/32X4 TORCH TIP DRILL (AA4612-24)

  • Miami, Florida, United States
  • Feb 26th
CLEVELAND .4331 X .625 SUBLAND DRILL (AA4647-1)

CLEVELAND .4331 X .625 SUBLAND DRILL (AA4647-1)

  • Miami, Florida, United States
  • Feb 26th
Toshiba Tungaloy TSD TSDU054 35/64" Coolant Through Carbide Tipped Drillbit

Toshiba Tungaloy TSD TSDU054 35/64" Coolant Through Carbide Tipped Drillbit

  • Atlanta, Illinois, United States
  • Mar 2nd
Toshiba Tungaloy TSD TSD175 17.5mm Coolant Through Carbide Tipped Drillbit

Toshiba Tungaloy TSD TSD175 17.5mm Coolant Through Carbide Tipped Drillbit

  • Atlanta, Illinois, United States
  • Mar 2nd
Toshiba Tungaloy TSD TSD120 12mm Coolant Through Carbide Tipped Drillbit

Toshiba Tungaloy TSD TSD120 12mm Coolant Through Carbide Tipped Drillbit

  • Atlanta, Illinois, United States
  • Mar 2nd
INGERSOLL 1.250" HI-POS 0 DEGREE INSERT DRILL #12J1B-1202281R01 THRU COOLANT

INGERSOLL 1.250" HI-POS 0 DEGREE INSERT DRILL #12J1B-1202281R01 THRU COOLANT

  • Loveland, Ohio, United States
  • Mar 6th
USED TRW USA 1-31/64" STRAIGHT SHANK COOLANT TWIST DRILL 1.4844"

USED TRW USA 1-31/64" STRAIGHT SHANK COOLANT TWIST DRILL 1.4844"

  • Fairfield, Iowa, United States
  • Mar 6th
TRICO Tri-Cool® Synthetic Coolant - MODEL : 30656 Container Size: 1 Gallon

TRICO Tri-Cool® Synthetic Coolant - MODEL : 30656 Container Size: 1 Gallon

  • Flushing, New York, United States
  • Mar 6th
HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE (Z) -QTY 6

HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE (Z) -QTY 6

  • Davis, California, United States
  • Mar 10th
HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 21/64-QTY 5

HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 21/64-QTY 5

  • Davis, California, United States
  • Mar 10th
HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 25/64-QTY 4

HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 25/64-QTY 4

  • Davis, California, United States
  • Mar 10th
Used CLE-FORGE Straight Shank 17/32 HS Drill Bit #331236

Used CLE-FORGE Straight Shank 17/32 HS Drill Bit #331236

  • Olympia, Washington, United States
  • Jun 6th
3 Cleveland -C70266 - Screw Machine Length Drill Bits Series: 2330 Drill Bit

3 Cleveland -C70266 - Screw Machine Length Drill Bits Series: 2330 Drill Bit

  • Brooksville, Florida, United States
  • Jun 7th
Screw Machine Drills 6.1mm HSS QTY 10 <2076>

Screw Machine Drills 6.1mm HSS QTY 10 <2076>

  • Saint Louis, Missouri, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies