+ Post new Ad
Precision Twist Taper Length Drill Parabolic #38 135 Deg HSS S/P L 4 5/8" Flute, US $8.95 – Picture 0
Precision Twist Taper Length Drill Parabolic #38 135 Deg HSS S/P L 4 5/8" Flute, US $8.95 – Picture 0

Precision Twist Taper Length Drill Parabolic #38 135 Deg Hss S/p L 4 5/8" Flute

US $8.95

  • Summerville, South Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Precision Twist Taper Length Drill Parabolic #38 135 Deg HSS S/P L 4 5/8" Flute 2 1/2" Precision Twist Drill Parabolic flute drill bits, these have a large flute space for greater chip flow and improved coolant flow to the drill bit point. These factors allow bits to drill deeper and produce closer hole tolerances more quickly than regular jobbers bits. A large cross section increases rigidity and strength. Bits have a reduced margin width to lessen contact between the bit and the hole sides to minimize friction and heat. A self centering 135 degree split point penetrates faster than other point styles, produces smaller chips for better chip flow, and will not skip or walk when starting a hole. The shank diameter is the same as the drill bit size. Specifications for this item Brand Name Precision Twist Mfr Part # DRL-TLDP38-01 Material Type High Speed Steel Finish Types Uncoated (Bright) Pkg Qty 1 Drill Point Split Flute Length 2 1/2  inches Flute Type Parabolic Number of Flutes 2 Outside Diameter 0.1015  inches Overall Length 4 5/8  inches Shank Material Type High Speed Steel Shank Type Round Shank Width .1015  inches Size #38 System of Measurement Wire Gauge UNSPSC Code 2012160   Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.

Directions

Similar products from Extended Length Drills

5 #5 HSS 3" Long Drill Bits

5 #5 HSS 3" Long Drill Bits

  • Easton, Pennsylvania, United States
  • Jan 30th
Assorted Drill Stop Springs

Assorted Drill Stop Springs

  • Easton, Pennsylvania, United States
  • Jan 30th
Assorted Apexes

Assorted Apexes

  • Easton, Pennsylvania, United States
  • Jan 30th
5 12" Assorted Drill Bits Also 8 6" Assorted Drill Bits

5 12" Assorted Drill Bits Also 8 6" Assorted Drill Bits

  • Easton, Pennsylvania, United States
  • Jan 30th
Precision Twist Taper Length Drill Parabolic #16 135 Deg HSS S/P L 5 3/4" Flute

Precision Twist Taper Length Drill Parabolic #16 135 Deg HSS S/P L 5 3/4" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist Taper Length Drill Parabolic #50 135 Deg HSS S/P L 3 3/4" Flute

Precision Twist Taper Length Drill Parabolic #50 135 Deg HSS S/P L 3 3/4" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist 5/16" Taper Length Drill 118 Deg HSS L 6 3/8" Flute 4"

Precision Twist 5/16" Taper Length Drill 118 Deg HSS L 6 3/8" Flute 4"

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist Drill Extra Length Drill Bit

Precision Twist Drill Extra Length Drill Bit

  • Salt Lake City, Utah, United States
  • Jan 30th
Precision Twist 2ACO 3.80 Mm Metric Cobalt Drill 135 Deg NAS 907 43mm Flute

Precision Twist 2ACO 3.80 Mm Metric Cobalt Drill 135 Deg NAS 907 43mm Flute

  • Summerville, South Carolina, United States
  • Jan 30th
DRILLS EXTRA LENGTH TAPER SHANK

DRILLS EXTRA LENGTH TAPER SHANK

  • Fairborn, Ohio, United States
  • Jan 30th
Extended Legnth Twist Drill Bit 19/64"

Extended Legnth Twist Drill Bit 19/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Machinists 1/2/D BUY NOW USA NEW Solid Carbide XL Drill

Machinists 1/2/D BUY NOW USA NEW Solid Carbide XL Drill

  • Lutz, Florida, United States
  • Jan 30th
Extended legnth twist Drill Bit 45/64"

Extended legnth twist Drill Bit 45/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Precision Twist 5/16" Taper Length Drill 135 Deg Cobalt L 6 3/8" Flute 4"

Precision Twist 5/16" Taper Length Drill 135 Deg Cobalt L 6 3/8" Flute 4"

  • Summerville, South Carolina, United States
  • Jan 30th
(#4957) New Machinist 29/32 Inch USA Made Straight Shank Drill

(#4957) New Machinist 29/32 Inch USA Made Straight Shank Drill

  • Troy, Michigan, United States
  • Jan 30th
Precision Twist Taper Length Drill #7 118 Degree HSS Overall Length 6" Flute

Precision Twist Taper Length Drill #7 118 Degree HSS Overall Length 6" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist 2ACO 3.75 Mm Metric Cobalt Drill 135 Deg NAS 907 39mm Flute

Precision Twist 2ACO 3.75 Mm Metric Cobalt Drill 135 Deg NAS 907 39mm Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

  • Hillsboro, Ohio, United States
  • Jan 30th
Twist Drill Bit 3/4"

Twist Drill Bit 3/4"

  • Coventry, Rhode Island, United States
  • Jan 30th
20 HSS / Cobalt Drill Bits - 1/4" - 6" .243"-.253"

20 HSS / Cobalt Drill Bits - 1/4" - 6" .243"-.253"

  • Goddard, Kansas, United States
  • Jan 30th

People who viewed this item also vieved

Precision Twist QC21P 17/32" Parabolic FL Drill 135d Split Pt HSS 4 13/16" Flute

Precision Twist QC21P 17/32" Parabolic FL Drill 135d Split Pt HSS 4 13/16" Flute

  • United States
  • Jan 30th
2" Eclipse Counterbore Arbor Master Tool Holder Part No. RJH-M4

2" Eclipse Counterbore Arbor Master Tool Holder Part No. RJH-M4

  • Lancaster, Massachusetts, United States
  • Jan 30th
Triumph 9/16" Twist Drill HSS Black Oxide 6" OAL 091736 NEW (401)

Triumph 9/16" Twist Drill HSS Black Oxide 6" OAL 091736 NEW (401)

  • Lancaster, Ohio, United States
  • Jan 30th
2 resharpened solid carbide drills.coolant thru.394 & .555.

2 resharpened solid carbide drills.coolant thru.394 & .555.

  • Woburn, Massachusetts, United States
  • Feb 21st
new geuhring .425 solid carbide drill.coolant thru

new geuhring .425 solid carbide drill.coolant thru

  • Woburn, Massachusetts, United States
  • Feb 21st
Solid Carbide spot drill or scrap thru tool coolant 20mm dia.

Solid Carbide spot drill or scrap thru tool coolant 20mm dia.

  • Spartanburg, South Carolina, United States
  • Feb 21st
Cle-Forge 1-25/64" Drill Bit 4MT, 4 Morse Taper 15" OAL ((#D196))

Cle-Forge 1-25/64" Drill Bit 4MT, 4 Morse Taper 15" OAL ((#D196))

  • Green Bay, Wisconsin, United States
  • Feb 22nd
Cle-Forge 1-9/16" Drill Bit 4MT, 4 Morse Taper 14-1/4" OAL ((#D195))

Cle-Forge 1-9/16" Drill Bit 4MT, 4 Morse Taper 14-1/4" OAL ((#D195))

  • Green Bay, Wisconsin, United States
  • Feb 22nd
Union Twist Drill 1-61/64" Drill Bit 4MT, 4 Morse Taper 15" OAL ((#D194))

Union Twist Drill 1-61/64" Drill Bit 4MT, 4 Morse Taper 15" OAL ((#D194))

  • Green Bay, Wisconsin, United States
  • Feb 22nd
taper length straight shank coolant fed drill bit 7/8" standard tools 10" oal t

taper length straight shank coolant fed drill bit 7/8" standard tools 10" oal t

  • Carterville, Illinois, United States
  • Feb 24th
straight shank coolant fed thru drill bit 61/64" 11 3/8 inch oal carbide tip u

straight shank coolant fed thru drill bit 61/64" 11 3/8 inch oal carbide tip u

  • Carterville, Illinois, United States
  • Feb 24th
DIJET HOSOIDRILL 1-7/64" Coolant Fed TiN Coated DRILL

DIJET HOSOIDRILL 1-7/64" Coolant Fed TiN Coated DRILL

  • Loveland, Ohio, United States
  • Feb 24th
HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 19/64-QTY 6

HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 19/64-QTY 6

  • Davis, California, United States
  • Mar 4th
HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 13/32-QTY 6

HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE 13/32-QTY 6

  • Davis, California, United States
  • Mar 4th
HIGH SPEED TWIST DRILLS - NORSEMAN- UNION MADE IN USA SIZE 16 - QTY 12

HIGH SPEED TWIST DRILLS - NORSEMAN- UNION MADE IN USA SIZE 16 - QTY 12

  • Davis, California, United States
  • Mar 4th
Stubby Length Drill Bit H.H.S 29 Piece Set 1/16 - 1/2" MADE IN AMERICA

Stubby Length Drill Bit H.H.S 29 Piece Set 1/16 - 1/2" MADE IN AMERICA

  • Rochester, New York, United States
  • Mar 27th
Precision HSS Twist Drill 3/16 x 6" 118 Degree point J8 51912 Taneged Oxide M7

Precision HSS Twist Drill 3/16 x 6" 118 Degree point J8 51912 Taneged Oxide M7

  • Bay City, Michigan, United States
  • Mar 27th
SCREW MACHINE DRILL LEFT HAND 7/16" DIAMETER HIGH SPEED TITEX GERMANY NEW $4.36

SCREW MACHINE DRILL LEFT HAND 7/16" DIAMETER HIGH SPEED TITEX GERMANY NEW $4.36

  • North Tonawanda, New York, United States
  • Mar 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies