Premium Window Door Motion Alarm System With Ir Remote Control + 130-db Siren

US $19.00

  • Arcadia, California, United States
  • Jan 30th
Premium Window Door Motion Alarm System With IR Remote Control + 130-dB Siren This wireless motion alarm system is designed to protect your home or office with advanced motion sensor that can detect movement with wide-range area and can be activated or de-activated through using a convenient IR remote controller. This window door motion alarm kit includes the motion alarm main unit and a small window/door magnetic contact, which is hard wired from alarm main unit and can be easily mounted onto an unsecured window or door.  Users can install the magnetic sensor on doors, windows, and many other objects that open and close. The door/window sensor will transmit trigger signals back to the main alarm unit when a magnet mounted near the sensor is moved away from or closer to the sensor. The main alarm unit emits a piercing 130dB loud siren sound when the window or door magnetic connection is lost.  It can be used either as a door/window alarm with siren sound or an entry greeting device with pleasant ding-dong sound.   This window door alarm system can be used as a security device to protect your property or home automation device.  If someone tries to open or tamper with your door or window to be monitored, a wired trigger signal will be transmitted to trigger the built-in siren in the main alarm unit.  The alarm kit consists of three components, the main alarm unit, magnetic contact sensor kit wired to the alarm, and remote controller. This system is operated using Infra-red technology and wired sensor contact. Designed, serving as a security system and entry greeting as well.   Easy Setup Simply install the magnetic sensor on doors, windows, drawer or other objects that open and close using double-sided adhesive for a hassle free peel-and-stick installation or screw it onto the door/window for fixed mounting.  The door/window sensor will transmit trigger signals back to the main alarm unit when a magnet mounted near the sensor is moved away from or closer to the sensor. The magnetic contact sensor should be connected next to the alarm main unit depending on the wire cable run. And the alarm unit can be mounted on any wall. After all the mounting and screwing, the alarm system can be set up and controlled via a remote control, giving users the ease and convenience in using the product. Multiple Operation Modes This motion alarm system can be set up for one of the four operation modes: Instant Alarm Mode: alarm will have 15-second delay duration before the alarm is engaged and active. This timed delay allows users to leave the protected area without triggering the alarm. Once the alarm is triggered, the alarm will sound off for 30 seconds with Status LED illuminating when motion is detected. Alarm Delay Mode: alarm provides the same 15-second delay duration before the alarm is engaged and active. But once motion is detected, there will be 15-second waiting delay to allow users to cancel the alarm before the siren sounds off for 30 seconds. Chime Mode: ding-dong sound will be activated by any motion detected. This is good for announcing or greeting visitor coming or when users are close to the protection area. No siren sound in this mode. Off Mode: When at "OFF" mode, this this motion alarm is dis-armed and not active. Longer Battery Life This motion alarm system is operated by using 4 of AAA Alkaline batteries (not included) while the IR remote uses a 12V 23A Alkaline battery (not included). The average battery life for typical usage is 7 months, longer than other comparable models in the market. Advanced window/door alarm system with magnetic contact sensor kit and hand-held IR remote controller. Featured with ear piercing 130-dB siren sound to scare off intruders when the monitored door/window, drawer or other equipment is opened or closed . Pleasant ding-dong chime sound for announcing or greeting visitor coming. Featured with 15-second Exit/Entry delay for users to have sufficient time to enter or leave the protected area without triggering the alarm. 4 alarm operation modes: Instant Arm, Delayed Arm, Chime Mode and Off mode setting. Battery-operated with low battery LED indicator. Operated by alkaline batteries (not supplied). Long lasting battery life with low power consumption design. Operation temperature: 0°C - 40°C indoor Entry delay time: 15+/-3 seconds Exit delay time: 15+/-3 seconds Alarm time: 30+/-5 seconds Alarm sound: equal or greater than 110dB @ 30cm Chime sound: equal or greater than 90dB @ 30cm W warm-up time: 60+/-20 seconds Power supply requirement: Alkaline AAA type x 4 for main alarm use (batteries not supplied) 12V Alkaline Type 23 battery for IR remote control (battery not supplied) 

Directions

Similar products from Other Guard & Supervision Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies