+ Post new Ad
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 0
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 1
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 2
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 3
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 0
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 1
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 2
Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8"), US $650 – Picture 3

Press Brake Die Set (36"x2 7/8"x1 5/8" & 36"x3 5/8"x1 1/8")

US $650

  • Middleville, Michigan, United States
  • Feb 25th
Open on mobile:
QR code
This press brake die set is a matched set and measures 36"x3 5/8"x1 1/8" on the upper side and the angles on it measure 36 degrees over 1 3/4" with a width of 1/2". The next angle is 2" down and 135 degrees. The measurements on the lower side are 36"x2 7/8"x1 5/8". The angle is 36 degrees, 1/2" wide and 7/8 deep. The tab on each is 1/2"x5/8". The weight is 61lbs. These dies are sold "As Is" and have no warranty expressed or implied. The buyer is responsible for calculating and paying shipping. Shipping is calculated from buyers location to sellers location. Payment expected within 7 business days.

Directions

Similar products from Punch Tool Sets & Dies

Diacro Turret Punch #12

Diacro Turret Punch #12

  • Reading, Pennsylvania, United States
  • Feb 25th
Whitney Metal Tool Co. No 29 Punch

Whitney Metal Tool Co. No 29 Punch

  • Reading, Pennsylvania, United States
  • Feb 25th
9 Drawer Stanley Tooling Cabinet Full of Wilson (Trumpf) Style tooling

9 Drawer Stanley Tooling Cabinet Full of Wilson (Trumpf) Style tooling

  • Cincinnati, Ohio, United States
  • Feb 25th
Vintage set of Greenfield steel stamps. Numbers and letters complete.

Vintage set of Greenfield steel stamps. Numbers and letters complete.

  • Chester, New Hampshire, United States
  • Feb 25th
Enterprise (Shin-Mori) 55TON Back Geared OBI Punch Press

Enterprise (Shin-Mori) 55TON Back Geared OBI Punch Press

  • Bellevue, Nebraska, United States
  • Feb 25th
NICE VTG LUFKIN 1671A AUTOMATIC CENTER PUNCH MACHINIST TOOL

NICE VTG LUFKIN 1671A AUTOMATIC CENTER PUNCH MACHINIST TOOL

  • Vail, Arizona, United States
  • Feb 25th
Dayton VPB 75 150 Punch 3/4" OD 5 pcs YES 5 pcs

Dayton VPB 75 150 Punch 3/4" OD 5 pcs YES 5 pcs

  • Montebello, California, United States
  • Feb 25th
Vintage MarkRite 3/32 Heavy Alloy Steel Punch Stamp Number Set 0-8 Part No 10630

Vintage MarkRite 3/32 Heavy Alloy Steel Punch Stamp Number Set 0-8 Part No 10630

  • Coventry, Connecticut, United States
  • Feb 25th
Vintage MarkRite 1/4 Heavy Alloy Steel Punch Stamp Number Set 0-8 Part No. 11630

Vintage MarkRite 1/4 Heavy Alloy Steel Punch Stamp Number Set 0-8 Part No. 11630

  • Coventry, Connecticut, United States
  • Feb 25th
*Steel stamps letters A - Z + a - z and numbers 1,5 mm height - MiG*

*Steel stamps letters A - Z + a - z and numbers 1,5 mm height - MiG*

  • Wuppertal, Germany
  • Feb 25th
STRIPPIT PUNCH AND DIE GRINDER

STRIPPIT PUNCH AND DIE GRINDER

  • Lake Forest, California, United States
  • Feb 25th
Thick Turret Amada Stripper Plate 0.25" X 4" Wilson Exacta Rectangle

Thick Turret Amada Stripper Plate 0.25" X 4" Wilson Exacta Rectangle

  • York, Ontario, Canada
  • Feb 25th
GREENLEE CONDUIT KNOCKOUT PUNCH 1-1/2 "

GREENLEE CONDUIT KNOCKOUT PUNCH 1-1/2 "

  • Modesto, California, United States
  • Feb 25th
Whitney Roper Metal Punch No 7 and No 5 Jr Set

Whitney Roper Metal Punch No 7 and No 5 Jr Set

  • Bogart, Georgia, United States
  • Feb 25th
Vintage 27 Piece 1/4'' A-Z Steel Punch Stamp Die Set Metal Letters w/Wood Box

Vintage 27 Piece 1/4'' A-Z Steel Punch Stamp Die Set Metal Letters w/Wood Box

  • Aurora, Colorado, United States
  • Feb 25th
Starrett Automatic Center Punch No.18-B

Starrett Automatic Center Punch No.18-B

  • North Port, Florida, United States
  • Feb 25th
1 1/4 " die npt dj set of 4 plus 2 extras # f 13338 nos

1 1/4 " die npt dj set of 4 plus 2 extras # f 13338 nos

  • Temperance, Michigan, United States
  • Feb 25th
Starrett no. S 565 Set Drive Pin Punches EDP No. 52587

Starrett no. S 565 Set Drive Pin Punches EDP No. 52587

  • Collegeville, Pennsylvania, United States
  • Feb 25th
GREENLEE 4" CONDUIT KNOCKOUT PUNCH

GREENLEE 4" CONDUIT KNOCKOUT PUNCH

  • Albany, Kentucky, United States
  • Feb 25th
C.R.V. - E-Z PUNCH PAK MACHINIST 9 Shim Punch Set 1/8-3/4 USA CRV set

C.R.V. - E-Z PUNCH PAK MACHINIST 9 Shim Punch Set 1/8-3/4 USA CRV set

  • Milwaukee, Wisconsin, United States
  • Feb 25th

People who viewed this item also vieved

*** FREE SHIPPING *** ISCAR APKT 1003PDR HM90 IC908 40pcs

*** FREE SHIPPING *** ISCAR APKT 1003PDR HM90 IC908 40pcs

  • Beograd, Serbia
  • Jan 30th
Carmex Internal Threading Kit

Carmex Internal Threading Kit

  • Morristown, Indiana, United States
  • Jan 30th
50 KENNAMETAL SNGA 434T KY4000 CERAMIC INSERTS O187S

50 KENNAMETAL SNGA 434T KY4000 CERAMIC INSERTS O187S

  • Montville, Ohio, United States
  • Jan 30th
46 KENNAMETAL CNG 643 T KY2000 CERAMIC INSERTS P207S

46 KENNAMETAL CNG 643 T KY2000 CERAMIC INSERTS P207S

  • Montville, Ohio, United States
  • Jan 30th
3/4" Fastcut Tool HSS M7 end mill, 1/2" SHK, 4 Flute, 5/8" LOC, 2-5/8" OAL

3/4" Fastcut Tool HSS M7 end mill, 1/2" SHK, 4 Flute, 5/8" LOC, 2-5/8" OAL

  • Cleveland, Ohio, United States
  • Jan 30th
1/2" x 1/2" x 1-1/4" x 3-1/4" Cobalt 4FL Weldon Tool Fine Rougher End Mill - E57

1/2" x 1/2" x 1-1/4" x 3-1/4" Cobalt 4FL Weldon Tool Fine Rougher End Mill - E57

  • Cleveland, Ohio, United States
  • Jan 30th
2-Nicholson Files - 8 Inch Flat Bastard Double Cut & 6" Half Round Rasp, USA

2-Nicholson Files - 8 Inch Flat Bastard Double Cut & 6" Half Round Rasp, USA

  • Syosset, New York, United States
  • Jan 30th
Nicholson 4" 1/2 Round Smooth File MADE IN THE USA!!

Nicholson 4" 1/2 Round Smooth File MADE IN THE USA!!

  • Beaver Falls, Pennsylvania, United States
  • Jan 30th
MORSE 1" High Speed Steel Chucking Reamer Straight Flute 0.750 Reduced Shank

MORSE 1" High Speed Steel Chucking Reamer Straight Flute 0.750 Reduced Shank

  • Middlebury, Indiana, United States
  • Jan 30th
1" High Speed Steel Chucking Reamer Straight Flute 0.567 Reduced Straight Shank

1" High Speed Steel Chucking Reamer Straight Flute 0.567 Reduced Straight Shank

  • Middlebury, Indiana, United States
  • Jan 30th
8 HSS MILLING CUTTERS - 1-1/4" to 1-3/4"

8 HSS MILLING CUTTERS - 1-1/4" to 1-3/4"

  • Covina, California, United States
  • Jan 30th
3 HSS MILLING CUTTERS - (2) 2" & 2-7/16"

3 HSS MILLING CUTTERS - (2) 2" & 2-7/16"

  • Covina, California, United States
  • Jan 30th
Lot of 49 Machinist Lathe Cutting Bits Tools Carbide Tips ACT Carbaloy Firthite

Lot of 49 Machinist Lathe Cutting Bits Tools Carbide Tips ACT Carbaloy Firthite

  • Washington, Missouri, United States
  • Jan 30th
Champion XL200-2-1/16 RotoBrute

Champion XL200-2-1/16 RotoBrute

  • Lake Wales, Florida, United States
  • Jan 30th
1 USED duMONT Keyway Broach, 3/16-C HS. MADE IN USA {G6}

1 USED duMONT Keyway Broach, 3/16-C HS. MADE IN USA {G6}

  • Mentor, Ohio, United States
  • Feb 21st
1 USED duMONT Keyway Broach, 5/16-C HS. MADE IN USA {G5}

1 USED duMONT Keyway Broach, 5/16-C HS. MADE IN USA {G5}

  • Mentor, Ohio, United States
  • Feb 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies