Printrbot Metal Plus With heated bed V2 Assembled, US $1,000.00 – Picture 0

Printrbot Metal Plus With heated bed V2 Assembled, US $1,000.00 – Picture 1

Printrbot Metal Plus With heated bed V2 Assembled, US $1,000.00 – Picture 2

Printrbot Metal Plus With Heated Bed V2 Assembled

US $1,000.00

Port Jefferson, New York, United States
Jun 9th

Open on mobile:
QR code

Product Description Plus (Model 1412) description: The Printrbot Plus is constructed of powder coated metal and machined aluminum with open platform for fabricating parts up to 10 x 10 x 10 inches using 1.75mm PLA filament. The printer head moves on the X (left to right) and Z (up and down) axes, while the print bed moves on the Y (backward and forward) axis. The Mic 6 aluminum bed is extremely flat and works with an Auto-Leveling Probe with the user-chosen software to calibrate the height of the print head. The Plus comes with a 1.75mm ceramic Ubis Hot End. The printer uses open source software and connects to the computer using the included mini-USB cable. Using a micro-SD card (sold separately), the printer can be disconnected from the computer for untethered printing during long print jobs. Linear rails and carts for stability and smooth movement of the print head and bed. The GT2 belt and aluminum pulley system facilitates precise movement of the print head and bed. The NEMA 17 stepper motors meet the National Electrical Manufacturers Association (NEMA) standard ICS 16-2001. Technical Specifications: Model: 1412 Build Volume: 10? x 10? x 10? / 254mm x 254mm x 254mm Print Resolution: 100 Microns Print Speed: 80mm/sec max recommended Filament: 1.75mm PLA (sample included) and ABS Extruder: Alu Extruder (direct drive). 1.75mm Ceramic Ubis Hot End with 0.4mm nozzle Auto Leveling: Auto-Leveling Probe works with software to calibrate Z axis height (see video) Print Bed: Heated: Max temperature of 80C Construction: Powder coated steel and aluminum body Rails: 12mm Linear Rails Belt: GT2 Pulleys: 20 tooth, dual flange GT2 aluminum Electronics: Printrbot Rev F Printrboard with micro-USB connection (cable included) and micro SD card slot for untethered printing Software: Printrbot does not provide software, but recommends Cura and/or Repetier. Both are available for free download. Power Requirements: 12V 350W ATX power supply Max Current Draw: ~5-9 Amps Motors: NEMA 17 stepper Warning 3d printing is a new industry and defects are possible

“Missing original packagingIn condition revived from printrbot”