Promotion 110v Full-automatic Interaction Label Dispenser Machine Zcut-870

US $160

  • Toronto, Canada
  • Jan 31st
Automatic tape Dispenser Automatic tape Dispenser  can be set according tothe length of the cut, and cut off the tape  straight, parallel to paste on theedge,Adhesive tape cutting length,  paste the interval can be adjusted freelyaccording to user needs. Loading the Tape Make sure the SUPPORT  STAND in use. Make sure the SUPPORT STAND in use. Turn the POWER SWITCH ON.( A lightly beep sound will come out then the  START BUTTON lights and shows the mode color. )(the default on this tape  dispenser sets number of cut. Red color light on which means 2 pcs. is  set. ) Remove the SAFETY COVER.( The START BUTTON is flashing with Red light. ) Press the START BUTTON and move the CUTTER BLADE ARM little by little. ( Catch the timing where the cutter blades open most widely.) Press the START BUTTON continuously, the CUTTER BLADE ARM moves  intermittently. ) Turn the POWER SWITCH OFF. Plug the cord out. Pull the TAPE SUPPORT BAR out to the limit. Pull the tape under the  BRAKE ROLLER. Put the tape between the TAPE HOLDER, hooked by TAPE SUPPORT BAR and  through the SLIT (between UPPER and LOWER BLADE) and affix the tape to  the TURN TABLE. Adjust the TAPE HOLDER to the proper width by sliding the TAPE HOLDER  ADJUSTMENT LEVER. Instruction Put the SAFETY  COVER on.Plug in the cord. Turn the POWER SWITCH ON. When you use AUTO MODE A (Blue light on) or AUTO MODE B (Purple light on), stop rotating the TURN TABLE at the SENSOR  which you set. When you use PRESET MODE (Red light on), the TURN TABLE  stop rotating after finishing numbers of cut. ) Our Recommendation When you carry ZCUT-870, please hold the bottom of machine. Do not grab  the TURN TABLE. Make sure the POWER SWITCH is "OFF" when you set the tape Please follow the instructions when you set the tape. (If you can not  make it,read Instruction Manual carefully and do i t over from the  beginning.) When ZCUT-870 is not in use,please unplug and switch OFF the POWER  SWITCH. When you finish using ZCUT-870,remove all the tape from the TURN TABLE Please do not modify ZCUT-870 by yourself. ZCUT-870 is designed for tape cutting only. Please do not cut any other  things. Item Include 1 Set of Automatic Tape  Dispenser Machine ZCUT-870 (151017)

Directions

Similar products from Tape Dispensing Devices

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies