PROSOFT RADIOLINX RLX-FHS FREQUENCY HOPPING SERIAL TRANSCEIVER RADIO / RS232, US $99.99 – Picture 0

PROSOFT RADIOLINX RLX-FHS FREQUENCY HOPPING SERIAL TRANSCEIVER RADIO / RS232, US $99.99 – Picture 1

PROSOFT RADIOLINX RLX-FHS FREQUENCY HOPPING SERIAL TRANSCEIVER RADIO / RS232, US $99.99 – Picture 2

PROSOFT RADIOLINX RLX-FHS FREQUENCY HOPPING SERIAL TRANSCEIVER RADIO / RS232, US $99.99 – Picture 3

PROSOFT RADIOLINX RLX-FHS FREQUENCY HOPPING SERIAL TRANSCEIVER RADIO / RS232, US $99.99 – Picture 4

Prosoft Radiolinx Rlx-fhs Frequency Hopping Serial Transceiver Radio / Rs232

US $99.99

Elk, Washington, United States
Jun 9th

Open on mobile:
QR code

This RadioLinx Frequency Hopping Serial Transceiver Radio is used and in good condition. The antennas are not included. RLX-FHS The RadioLinx Frequency Hopping Serial Radio allows you to design multiple device networks to share the same RF network (channel) allowing different protocols to share a common repeater. A remote RLX-FHS can be programmed to operate as a store and forward repeater to extend network range. The RLX-FHS operates in point-to-point, point-multipoint, or peer-to-peer modes. Addressable multi-drop RS-485 operation is built into the module. The RF output levels are user-configurable and 64 data channels allow multiple networks to operate in the same area. • Supports up to 1000 addressed devices with 2000 radios and 78 repeaters per network • 64 user-selectable data channels for multiple network operation • Active antenna diversity • 2.4 GHz frequency hopping spread spectrum (FHSS) technology • Secure wireless communications with data encryption, proprietary radio protocol, and 2.4 GHz FHSS physical layer • Industrial temperature range • 15+ (24 km) mile range with high-gain antennas (longer with repeaters) • Remote diagnostics without interrupting data communications • Over air user programmability (after initial configuration) using Windows- based software Frequency: 2400 to 2483.5 MHz (varies by country) Protocols: All standard IEEE 802.3 protocols Encryption: ARC4 (40 or 128 bit) Network Topology: Peer-to-Peer, store and forward repeater, Point-to-Point, Point-to- Multipoint Hop Patterns: 64 independent, non-interfacing networks Error Detection: 32-bit CRC and ARQ (Automatic Re-Send Query) Radio Type: Frequency Hopping Spread Spectrum Output power: 1mW to 250mW, programmable (varies by country) Channel data rates: 250 Kbps Receiver sensitivity: -96 dBm @ 10-6 BER Channels - user selectable: 64 North America Adjacent Channel Rejection: > 40 dB Spurious Rejection: > 50 dB Typical indoor range: 500 to 1500 ft (150 to 450 meters) Outdoor range: 15 + miles line of sight with high-gain antennas Security: ARC4 (40 or 128 bit) Enclosure: Extruded aluminum with DIN and panel mount Size: 4.10 in. x 3.71 in. x 2.05 in. (104.1 mm x 94.23 mm x 52.07 mm) Vibration: IEC 60068-2-6 Shock: IEC 60068-2-27 Ports: RS-232, DB-9 RS-422 and RS-485 Asynchronous half-duplex/full-duplex 2400 bps to 115.2 Kbps full duplex Antenna ports: Two RP-SMA connectors, automatic antenna diversity Weight: 1 lbs /454g Environmental: Operating temperature: -40°C to +75°C (-40°F to 167°F) Humidity: To 90% RH, non-condensing External power: 10 to 24 VDC Average power: < 4W

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	RADIOLINX
MPN	RLXFHS
Model	RLX-FHS