+ Post new Ad
PSI Woodworking Long Ranger III Remote Switch, US $1500 – Picture 0
PSI Woodworking Long Ranger III Remote Switch, US $1500 – Picture 0

Psi Woodworking Long Ranger Iii Remote Switch

US $1500

  • Kewanee, Illinois, United States
  • Jul 22nd
Open on mobile:
QR code
I ended up with two of these, did not need this one. It is brand new, in an unopened box. This unit includes the receiver, the hand control, and a 9V battery. It is for 220 volts, NOT 110. I use mine for a remote control for my dust collector. Input voltage required is from 208/-240 volts, with a 16 Amp capacity circuit. It will generate about 2.5 HP of power and has a 50 foot range. Extra LRTM-3 hand controls are available online. The RF signal, if in range, will go through walls and it has unlimited programmable frequencies. Convenient on/off switch via remote.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand PSI

Directions

Similar products from Other Woodworking Equipment & Tools

1 NEW SGS 1/4" DIAMETER CARBIDE WOOD ROUTER. 2 FLUTE. UP CUT. USA MADE (T713)

1 NEW SGS 1/4" DIAMETER CARBIDE WOOD ROUTER. 2 FLUTE. UP CUT. USA MADE (T713)

  • Mentor, Ohio, United States
  • Jul 23rd
1 NEW USA 3/32" DIAMETER CARBIDE WOOD ROUTER. 5/8" LOC. 2 FL DOWN CUT USA -T724-

1 NEW USA 3/32" DIAMETER CARBIDE WOOD ROUTER. 5/8" LOC. 2 FL DOWN CUT USA -T724-

  • Mentor, Ohio, United States
  • Jul 23rd
Wedgie Sled Adjustable Stop Block - Very Accurate Table Saw Tool for Wood Lathe

Wedgie Sled Adjustable Stop Block - Very Accurate Table Saw Tool for Wood Lathe

  • Newport Beach, California, United States
  • Jul 23rd
Table Saw Slot Adjuster Mortise &Tenon Tools Woodworking Tenon Movable T4G5

Table Saw Slot Adjuster Mortise &Tenon Tools Woodworking Tenon Movable T4G5

  • shanghai, China
  • Jul 23rd
BestTeam CNC Dust Collector Dust Cover Brush 65mm-125mm

BestTeam CNC Dust Collector Dust Cover Brush 65mm-125mm

  • Crosby, Texas, United States
  • Jul 23rd
4 USED LMT-Belin 13040B CARBIDE SINGLE FLUTE UPCUT SPIRAL ROUTER BITS (R710)

4 USED LMT-Belin 13040B CARBIDE SINGLE FLUTE UPCUT SPIRAL ROUTER BITS (R710)

  • Mentor, Ohio, United States
  • Jul 22nd
1 NEW SGS 5/16" DIAMETER CARBIDE WOOD ROUTER. 1" LOC. 2 FL DOWN CUT USA -T728-

1 NEW SGS 5/16" DIAMETER CARBIDE WOOD ROUTER. 1" LOC. 2 FL DOWN CUT USA -T728-

  • Mentor, Ohio, United States
  • Jul 22nd
1 NEW SGS 5/16" DIAMETER CARBIDE WOOD ROUTER. 1" LOC. 2 FL DOWN CUT USA -T730-

1 NEW SGS 5/16" DIAMETER CARBIDE WOOD ROUTER. 1" LOC. 2 FL DOWN CUT USA -T730-

  • Mentor, Ohio, United States
  • Jul 22nd
5 USED ONSRUD CARBIDE SINGLE FLUTE UPCUT SPIRAL ROUTER BITS. 1/4" SHANK (R716)

5 USED ONSRUD CARBIDE SINGLE FLUTE UPCUT SPIRAL ROUTER BITS. 1/4" SHANK (R716)

  • Mentor, Ohio, United States
  • Jul 22nd
CMT Tools Router Bit Set Ogee Kitchen Set 5-piece 1/2" shank, Item 800-509

CMT Tools Router Bit Set Ogee Kitchen Set 5-piece 1/2" shank, Item 800-509

  • Albert Lea, Minnesota, United States
  • Jul 22nd
1 NEW SGS 1/2" DIAMETER CARBIDE WOOD ROUTER. 2 FLUTE. UP CUT. USA MADE (T720)

1 NEW SGS 1/2" DIAMETER CARBIDE WOOD ROUTER. 2 FLUTE. UP CUT. USA MADE (T720)

  • Mentor, Ohio, United States
  • Jul 22nd
ETP Hydro-Grip D-46/65-94

ETP Hydro-Grip D-46/65-94

  • Beaumont, Texas, United States
  • Jul 22nd
Drillpro 10pcs M8x100mm T-Nut Sliding Screws For 30 Series Miter Track T-Slot Wo

Drillpro 10pcs M8x100mm T-Nut Sliding Screws For 30 Series Miter Track T-Slot Wo

  • Guangzhou, China, China
  • Jul 21st
Drillpro Corner Chisel Wood Chisel for Square Embedded Hinge Recesses Woodworkin

Drillpro Corner Chisel Wood Chisel for Square Embedded Hinge Recesses Woodworkin

  • Guangzhou, China, China
  • Jul 21st
Aluminum Alloy 3 In 1 Dowelling Jig 6/8/10/15mm Wood Drilling Guide Locator Adju

Aluminum Alloy 3 In 1 Dowelling Jig 6/8/10/15mm Wood Drilling Guide Locator Adju

  • Guangzhou, China, China
  • Jul 21st
Drillpro 6/8/10mm Oblique Hole Positioner Grey Woodworking Guide Locator Pocket

Drillpro 6/8/10mm Oblique Hole Positioner Grey Woodworking Guide Locator Pocket

  • Guangzhou, China, China
  • Jul 21st
1/4 Inch Wood Edge Flush Trim Router Bit

1/4 Inch Wood Edge Flush Trim Router Bit

  • Guangzhou, China, China
  • Jul 21st
RAISED PANEL CARBIDE SHAPER CUTTER. 3/4” BORE With 1/2” Bushing

RAISED PANEL CARBIDE SHAPER CUTTER. 3/4” BORE With 1/2” Bushing

  • Schwenksville, Pennsylvania, United States
  • Jul 21st
1/2-inch Round Shank 3/8-inch Cutting Dia 8 Degree Woodwork Dovetail Router Bit

1/2-inch Round Shank 3/8-inch Cutting Dia 8 Degree Woodwork Dovetail Router Bit

  • Hong Kong, Hong Kong
  • Jul 21st
Amana Shaper Cutter #SC466

Amana Shaper Cutter #SC466

  • Winslow, Indiana, United States
  • Jul 21st

People who viewed this item also vieved

Makita planer blades 3'' 1/4 (4 pcs) (s&h could be as low as 5$)

Makita planer blades 3'' 1/4 (4 pcs) (s&h could be as low as 5$)

  • Quebec, Quebec, Canada
  • Jan 30th
BOSTITCH BSA4802M 10 TPI Reciprocating Saw Blade, 6-Inch, 3-Pack

BOSTITCH BSA4802M 10 TPI Reciprocating Saw Blade, 6-Inch, 3-Pack

  • Beaumont, California, United States
  • Jan 30th
TWO 64.5" (5' 4-1/2") x 1/2" x 6T Band Saw Blade

TWO 64.5" (5' 4-1/2") x 1/2" x 6T Band Saw Blade

  • Aliso Viejo, California, United States
  • Jan 30th
7Pc Diamond File Set Craft Modelling Home Repair DIY Tools Pack Set Kit

7Pc Diamond File Set Craft Modelling Home Repair DIY Tools Pack Set Kit

  • London, United Kingdom
  • Jan 30th
Buck Bros Chisel 1" (b3)

Buck Bros Chisel 1" (b3)

  • United States
  • Jan 30th
Chisel End Cat Paw Drop Forged Steel USA

Chisel End Cat Paw Drop Forged Steel USA

  • Meridian, Idaho, United States
  • Jan 30th
Push Pull Toggle Clamp 36003 Holding Capacity 272Kg

Push Pull Toggle Clamp 36003 Holding Capacity 272Kg

  • Taizhou, ???, China
  • Jan 30th
Hand Operated Adjustable Capacity170Kg Flange base Toggle Clamp 451

Hand Operated Adjustable Capacity170Kg Flange base Toggle Clamp 451

  • Taizhou, ???, China
  • Jan 30th
Push Pull Toggle Clamp GH-36070 Holding Capacity 50Kg

Push Pull Toggle Clamp GH-36070 Holding Capacity 50Kg

  • Taizhou, ???, China
  • Jan 30th
3 F4P TITANIUM STEP DRILL BITS UNI STEP DRILL BIT

3 F4P TITANIUM STEP DRILL BITS UNI STEP DRILL BIT

  • Summerville, South Carolina, United States
  • Jan 30th
Fastenal Magnum Super Premium Drill Bits Extractor Set

Fastenal Magnum Super Premium Drill Bits Extractor Set

  • El Dorado, Kansas, United States
  • Jan 30th
Irwin Unibit 10502 Step Bit 3 Piece Drill Bit Set #1 #2 #3 - NEW!

Irwin Unibit 10502 Step Bit 3 Piece Drill Bit Set #1 #2 #3 - NEW!

  • Pottstown, Pennsylvania, United States
  • Jan 30th
1/4" x 5-6" x 16" Thin Maple Boards laser craft wood scroll saw #B84-ma

1/4" x 5-6" x 16" Thin Maple Boards laser craft wood scroll saw #B84-ma

  • Kenosha, Wisconsin, United States
  • Jan 30th
PVC Edge banding WilsonArt Shadow 1 3/4" x 3MM FLAT

PVC Edge banding WilsonArt Shadow 1 3/4" x 3MM FLAT

  • Effingham, Illinois, United States
  • Jan 30th
PVC Edge Banding WilsonArt Natural Pear 44MM x 3MM FLUTED

PVC Edge Banding WilsonArt Natural Pear 44MM x 3MM FLUTED

  • Effingham, Illinois, United States
  • Jan 30th
Craftsman 4.125" Jointer Planer Series 149.236221 Parts List User Manual

Craftsman 4.125" Jointer Planer Series 149.236221 Parts List User Manual

  • Naperville, Illinois, United States
  • Jan 30th
Delta DC-380 15 Inch Planer Manual Instructions & Parts

Delta DC-380 15 Inch Planer Manual Instructions & Parts

  • South Lyme, Connecticut, United States
  • Jan 30th
Delta 900 Radial Saw Operators Owners Manual Parts List and Moulding Cutter

Delta 900 Radial Saw Operators Owners Manual Parts List and Moulding Cutter

  • Wichita, Kansas, United States
  • Jan 30th
3.5 bore 3.75 ct 8-3/4 dia carbide tipped 362 Shaper cutter reed corner angle

3.5 bore 3.75 ct 8-3/4 dia carbide tipped 362 Shaper cutter reed corner angle

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 3/8 ct 6-3/8 dia carbide tipped 361 Shaper cutter rabbet dado alternate

3.5 bore 3/8 ct 6-3/8 dia carbide tipped 361 Shaper cutter rabbet dado alternate

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 5/16 ct 6-3/8 dia carbide tipped 360 Shaper cutter rabbet dado good

3.5 bore 5/16 ct 6-3/8 dia carbide tipped 360 Shaper cutter rabbet dado good

  • Greenville, South Carolina, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies