Psiber Ctk1015 Cabletracker Signal Generator And Trace Probe Set (new)

US $1200

Acra, New York, United States
May 24th

Open on mobile:
QR code

Psiber CTK1015 Tone Generator and Probe Kit This Tone Generator and Probe kit is designed Specifically for Network Maintenance Professionals - The CableTracker Network Tone and Probe Kit model CTK1015 is designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. The CableTracker Network Tone and Probe Kit features a Port ID function that blinks the link light verifying cable connectivity. This feature also provides a simple and effective method to identify switch or hub port assignments on active networks. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning with two different tone frequencies and patterns is provided for non-active circuit tracing. Blink the Link Lights to ID Ports - The Psiber CTK1015 tone and probe kits were designed for one primary mission: To identify the termination point of a cable. Unfortunately, these were designed for telephony, not network maintenance. Why else would they have RJ-11 plugs? CableTracker is different. CableTracker incorporates 3 link light activation speeds to easily identify user cable termination ports by simply looking for the blinking lights. Why three? Because ethernet switches do not react the same to activation. Three speeds ensures the widest compatibility available. Easy Ethernet or Telephony Connection - Most toners on the market offer RJ-11 hard-wired modular connection. That's because they were built for the phone company. This does nothing for the LAN technician and ethernet RJ-45 jacks or patch cords. The CableTracker Network ID Kit was designed to accommodate both ethernet and telephony cabling. Simply connect to the LAN with either the female RJ-45 jack or directly to the wallplate with the included RJ-45 patch cord. The Cabletracker even provides alligator clips for punch down blocks or non-terminated cables. Time Saving Features with You in Mind - The Psiber CTK1015 Cabletracker incorporates several time and money saving features not found on other kits. The RJ-45 male connection and the alligator clips are detachable and commonly available, meaning cord failure won't obsolete your tester. Auto power down extends battery life and a built-in low battery indicator warns when battery replacement is required, saving unexpected down time searching for batteries. The CableTracker Network Probe Model CT15 incorporates volume control, non-conductive plastic tip, and complete compatibility with existing toners. PROFESSIONAL QUALITY - Specially designed for Ethernet Networks This is the BEST Tone Generator money can buy for Ethernet Networks Transmits four audible tones RJ-45 female port OR Detachable DMM alligator clips Detects short or open circuits Can be used on a LIVE Ethernet port! Comes with durable carrying case. Why use Telecom Tone generators on Data Networks? Choose between Ethernet Link indicator (Active Network) OR four audible tones (Inactive Network) on Probe Unit Great for creating cable charts while user continue to use network Great for finding cable at Patch Panel for a particular wall jack, while the network is live The Psiber Ethernet Link Indicator on the Probe Unit is great for quickly picking out the correct cable in a bundle of cables near the patch panel - How many times were you confused by which cable is connected to a Audible Telecom Tone Generator. Detachable AND Replaceable wire leads with positive and negative aligator clips AND RJ-45 plug Made in the USA Generator Dimensions: 3.0 in x 2.4 in. x 1.4 in. (76 mm x 66 mm x 36 mm) Probe Dimensions: 8.0 in x 1.4 in. x 1.5 in. (203 mm x 36 mm x 38 mm) Power Supply: One 9 volt battery each for CT10 and CT15 Operating Temperature: 32°F to 122°F (0°C to 50°C) Storage Temperature: 14°F to 131°F (-10°C to 55°C) CT10 Signal Frequencies - Low Tone: 1000 Hz pulsed CT10 Signal Frequencies - High Tone: 8kHz pulsed CT15 Reception Frequencies - Broadband 100 - 20000 Hz Literature for the Psiber Cabletracker CTK-1015 User Guide for the Psiber Cabletracker CTK-1015 We ship by USPS Priority Mail within one business day (excluding weekends and holidays). We are distributors for this product, so if you have questions, please let us know.