Qe12sp-h-mt-d0 Gentec Energy Detector

US $90

  • Wien, Austria
  • Jun 18th
Features Modular Concept Increase the power capability of your detector: 2 different cooling modules Low Noise Level 0.7 µJ for the MB coating QED Attenuator Available Measure up to 5X higher energies. Available with optional calibration, all wavelengths between 532 & 1064 nm, or single wavelength Available with Metallic Absorber High Repetition Rate (6000 Hz) Test Target Included With the MB models Smart Interface Containing all the calibration data DESCRIPTION The QED attenuators increase the energy, energy density, average power and average power density capabilities of the QE Series detectors. They are engineered to typically transmit 30-50% (@1.064 µm) a of the incident radiation to the detector in a near Lambertian pattern (very wide diffusion pattern). Their slide-in casing make them easy to install and remove and they are held securely in place with the use of simple set screws. Since they become part of the detector, it is important to understand how they will affect the calibration. For UV applications, we offer the QEAS attenuator that covers the 190 to 300 nm range. This model is available on demand and in 2 sizes: 25 and 50 mm. STANDARD CALIBRATION     QE Detector Alone: Fully calibrated, from 0.25 - 2.5 µm With QED Attenuator: Not calibrated (Calibrated by the user) CALIBRATED AS A PAIR (-QED)     QE Detector Alone: Not calibrated With QED Attenuator: Fully calibrated, from 0.3 - 2.1 µm EXTRA QED CALIBRATION     QE Detector Alone: Fully calibrated, from 0.25 - 2.5 µm With QED Attenuator: Calibrated at one wavelength (532 nm or 1064 nm

Directions

Similar products from Measuring devices & Panel Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies