+ Post new Ad
(QTY 4) Garr HOG 1/2" 49760 Carbide TiALN 4FL Roughing Rougher End Mill (B 93), US $62 – Picture 0
(QTY 4) Garr HOG 1/2" 49760 Carbide TiALN 4FL Roughing Rougher End Mill (B 93), US $62 – Picture 0

(qty 4) Garr Hog 1/2" 49760 Carbide Tialn 4fl Roughing Rougher End Mill (b 93)

US $62

  • Dallas, Texas, United States
  • Jun 9th
Open on mobile:
QR code
TOLERANCES for this end mill are as follows: the flute dia. is +.000-.002" (+.000-.050mm), 3mm to 6mm shank dia. is +.0000-.0003" (-0.0000-0.0075mm), and 1/4" to 1" shank dia. is -.0001-.0004" (-0.0025-0.0100mm). The EDP# for this end mill is 49760 and it has 4 flutes with a flute dia. of 0.5, a flute length of 1.25, a shank dia. of 0.5, and a neck dia. of 0.0. The overall length, reach length (l.b.s.), neck length behind flutes, corner radius, end type, and flat weight (lbs) are 3.0, 0.0, 0.0, 0.0, CMFRY, and some diameters may vary slightly due to resharpening. This lot of 4 Garr HOG 1/2" 49760 Carbide TiALN 4FL Roughing Rougher End Mill (B 93) is in used good condition. The GARR series VHM EDP# 49760 is a solid submicron grain carbide end mill that is center cutting. It uses state-of-the-art rougher with variable flute geometry that is perfect for stainless steel, inconel, pH materials, cold rolled steel, titanium, cast iron, and tool steels. This end mill is furnished with a standard 45 degree lead chamfer and a Weldon Flat. The satisfaction is guaranteed for this end mill. Save big with combined shipping and check out other items from the seller. Please note that Texas residents must pay 8.25% sales tax.

Directions

Similar products from End Mills Router & Drill Bits

3/8" US22 Solid Carbide 90 Degree ALtIN Coated 4 Flute Drill Mill (O 943)

3/8" US22 Solid Carbide 90 Degree ALtIN Coated 4 Flute Drill Mill (O 943)

  • Dallas, Texas, United States
  • Jun 9th
(QTY 4) HTC Garr 5/8" Carbide TiALN 4FL Fine Roughing Rougher End Mill B 123

(QTY 4) HTC Garr 5/8" Carbide TiALN 4FL Fine Roughing Rougher End Mill B 123

  • Dallas, Texas, United States
  • Jun 9th
3/4" Garr 80507 Carbide TialN 4 Flute .125 CR End Mill (O 921)

3/4" Garr 80507 Carbide TialN 4 Flute .125 CR End Mill (O 921)

  • Dallas, Texas, United States
  • Jun 9th
Endmill HSS SC406 4F SE 30 Degree RH SQUARE UNC 7/16x3/8x1 EDP#41141

Endmill HSS SC406 4F SE 30 Degree RH SQUARE UNC 7/16x3/8x1 EDP#41141

  • Cedar Rapids, Iowa, United States
  • Jun 9th
3/4" Garr 80507 Carbide TialN 4 Flute .090 CR End Mill (O 922)

3/4" Garr 80507 Carbide TialN 4 Flute .090 CR End Mill (O 922)

  • Dallas, Texas, United States
  • Jun 9th
3 - 1 1/4" shank end mills

3 - 1 1/4" shank end mills

  • Suring, Wisconsin, United States
  • Jun 9th
DORMER WOODRUFF CUTTER 1 1/2" X 1/4" X 1/2" SHAFT

DORMER WOODRUFF CUTTER 1 1/2" X 1/4" X 1/2" SHAFT

  • Surrey, British Columbia, Canada
  • Jun 9th
Concave Radius End Mill 1/4" Radius, cutter DIA 3/4"

Concave Radius End Mill 1/4" Radius, cutter DIA 3/4"

  • Westfield, Massachusetts, United States
  • Jun 9th
3/4" Garr 80467 Carbide TialN 4 Flute .030 CR End Mill (O 925)

3/4" Garr 80467 Carbide TialN 4 Flute .030 CR End Mill (O 925)

  • Dallas, Texas, United States
  • Jun 9th
3/4" Garr 80487 Carbide TialN 4 Flute .060 CR End Mill (O 924)

3/4" Garr 80487 Carbide TialN 4 Flute .060 CR End Mill (O 924)

  • Dallas, Texas, United States
  • Jun 9th
1/2" Garr 80307 Carbide 4 Flute TiALN .015CR End Mill (O 926)

1/2" Garr 80307 Carbide 4 Flute TiALN .015CR End Mill (O 926)

  • Dallas, Texas, United States
  • Jun 9th
DORMER WOODRUFF CUTTER 1 1/2" X 5/16" X 1/2" SHAFT

DORMER WOODRUFF CUTTER 1 1/2" X 5/16" X 1/2" SHAFT

  • Surrey, British Columbia, Canada
  • Jun 9th
(Lot of 4) 3/4" HTC Varimill Carbide TialN 4 Flute .020 CR End Mill (B 96)

(Lot of 4) 3/4" HTC Varimill Carbide TialN 4 Flute .020 CR End Mill (B 96)

  • Dallas, Texas, United States
  • Jun 9th
Lot of (2) Brubaker 1/8 x 3/16 Shank Carbide Endmill 2 Flute =NOS=

Lot of (2) Brubaker 1/8 x 3/16 Shank Carbide Endmill 2 Flute =NOS=

  • Compton, California, United States
  • Jun 9th
DORMER WOODRUFF CUTTER 1 1/2" X 3/8" X 1/2" SHAFT

DORMER WOODRUFF CUTTER 1 1/2" X 3/8" X 1/2" SHAFT

  • Surrey, British Columbia, Canada
  • Jun 9th
Set of 3 carbide 2 flute1/8", 3/16 ball end mills and 7/32 straight

Set of 3 carbide 2 flute1/8", 3/16 ball end mills and 7/32 straight

  • Indianapolis, Indiana, United States
  • Jun 9th
Niagara profile cutter

Niagara profile cutter

  • Whitehall, Michigan, United States
  • Jun 9th
5/8" Garr 80427 Carbide 4 Flute TiALN .090 CR End Mill (O 931)

5/8" Garr 80427 Carbide 4 Flute TiALN .090 CR End Mill (O 931)

  • Dallas, Texas, United States
  • Jun 9th
Lot of (6) Guhring 1/2" Cobalt End Mill - p/n: 52764-1

Lot of (6) Guhring 1/2" Cobalt End Mill - p/n: 52764-1

  • Compton, California, United States
  • Jun 9th
Brubaker Special End Mill HNA 1" Diameter 2 Flute .07 Rad =NOS=

Brubaker Special End Mill HNA 1" Diameter 2 Flute .07 Rad =NOS=

  • Compton, California, United States
  • Jun 9th

People who viewed this item also vieved

12 MM D-1 KEYWAY BROACH DUMONT MINUTEMAN USA

12 MM D-1 KEYWAY BROACH DUMONT MINUTEMAN USA

  • East Brunswick, New Jersey, United States
  • Jan 30th
7/16 D KEYWAY BROACH DUMONT MINUTEMAN USA

7/16 D KEYWAY BROACH DUMONT MINUTEMAN USA

  • East Brunswick, New Jersey, United States
  • Jan 30th
ISCAR DNMG 332-VL IC908

ISCAR DNMG 332-VL IC908

  • Dugo Selo, Zagreb, Croatia, Republic of
  • Jan 30th
2 Allied Machine & Engineering Corp inserts M099800 0060 151T-0025

2 Allied Machine & Engineering Corp inserts M099800 0060 151T-0025

  • Rochester, Michigan, United States
  • Jan 30th
CNMX453T0820 KY3500 KENNAMETAL CERAMIC TURNING INSERTS

CNMX453T0820 KY3500 KENNAMETAL CERAMIC TURNING INSERTS

  • Johnson City, Tennessee, United States
  • Jan 30th
SNHX1203T KC920M KENLOC CARBIDE LOCKPIN INSERTS

SNHX1203T KC920M KENLOC CARBIDE LOCKPIN INSERTS

  • Johnson City, Tennessee, United States
  • Jan 30th
Brown & Sharpe + Generic -2 Milling Cutters [.5" X 5" X 1.25"]&[1/16" X 6 X 1"]

Brown & Sharpe + Generic -2 Milling Cutters [.5" X 5" X 1.25"]&[1/16" X 6 X 1"]

  • Plano, Texas, United States
  • Jan 30th
Brown & Sharpe -Milling Cutter 1/2" X 6" X 1.25" "WR3" #MFG #MANUFACTURING #CNC

Brown & Sharpe -Milling Cutter 1/2" X 6" X 1.25" "WR3" #MFG #MANUFACTURING #CNC

  • Plano, Texas, United States
  • Jan 30th
VTG Starrett Drive Pin Punch Set of 8 w/ Case

VTG Starrett Drive Pin Punch Set of 8 w/ Case

  • Noblesville, Indiana, United States
  • Jan 30th
14 X 1 TOOL DIE L H THREAD

14 X 1 TOOL DIE L H THREAD

  • Tucson, Arizona, United States
  • Jan 30th
Cle-Line C20999, Size 3, HSS, Straight Shank, Flute Taper Pin Reamer

Cle-Line C20999, Size 3, HSS, Straight Shank, Flute Taper Pin Reamer

  • Chillicothe, Missouri, United States
  • Jan 30th
ANTIQUE QUICK SET ADJUSTABLE BLADE REAMERS

ANTIQUE QUICK SET ADJUSTABLE BLADE REAMERS

  • San Ardo, California, United States
  • Jan 30th
SM-BL-07-5 Steelmax 7 1/4" TCT Blade for Mild Steel

SM-BL-07-5 Steelmax 7 1/4" TCT Blade for Mild Steel

  • Niagara, Wisconsin, United States
  • Jan 30th
Dolfa 5-748-258 Metal Slitting Saw With Side Chip Clearance - 3" X 3/32" X 1"

Dolfa 5-748-258 Metal Slitting Saw With Side Chip Clearance - 3" X 3/32" X 1"

  • Coarsegold, California, United States
  • Jan 30th
Hertel 1" Center Cutting Bit 2 Flute CNC Milling Carbide Bit HAA75032L

Hertel 1" Center Cutting Bit 2 Flute CNC Milling Carbide Bit HAA75032L

  • Corry, Pennsylvania, United States
  • Jan 30th
WELDON DEBURRING TOOLS

WELDON DEBURRING TOOLS

  • Randolph, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies