+ Post new Ad
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 0
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 1
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 2
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 3
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 0
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 1
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 2
Quick Change Tool Post,125-150mm Centre Height,Block size73x 73x 51 mm+4 holders, US $154.00 – Picture 3

Quick Change Tool Post,125-150mm Centre Height,block Size73x 73x 51 Mm+4 Holders

US $154.00

  • Delhi, DELHI, India
  • Jan 30th
Open on mobile:
QR code
This is a high quality quick change tool post for 125- 150 mm Centre Height. An improved fully hardened and ground and superbly grinded finished quality with chamfering at edges for secure working. The Main Block Size is 73mm x 73 mm x 51 mm Height. Centre bore is 5/8" Maximum capacity of the holder is 16 mm ( 5/8" ) This set would be supplied with 2 std Holders, 1 vee Holder & 1 Parting Holder along with a Spanner & Allen keys set. A high demanded item in the entire  world in a decent lowered price than all. Its a great deal !!!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer CLASSIC QUALITY TOOLS
Country of Manufacture India
Model T 51

Directions

Similar products from Fast Change Tools

Lot of Five kwik switch 300 End Mill Holders 1/2", 5/8", 3/4", 7/8", 1"

Lot of Five kwik switch 300 End Mill Holders 1/2", 5/8", 3/4", 7/8", 1"

  • Holland, Ohio, United States
  • Jan 30th
Lot of Three kwik switch 300 End Mill Holders 5/8", 3/4", 7/8"

Lot of Three kwik switch 300 End Mill Holders 5/8", 3/4", 7/8"

  • Holland, Ohio, United States
  • Jan 30th
New COLLIS 62962 Turret Tool Holders MT 4 MT4 Morse Taper Shank 2.5" Adapter

New COLLIS 62962 Turret Tool Holders MT 4 MT4 Morse Taper Shank 2.5" Adapter

  • Happy Valley, Oregon, United States
  • Jan 30th
New COLLIS 68032 1/2 30mm Precision Milling Holders Straight Shank End Mills

New COLLIS 68032 1/2 30mm Precision Milling Holders Straight Shank End Mills

  • Happy Valley, Oregon, United States
  • Jan 30th
New COLLIS Cat 30 75241 CV30SMH .7500-2.00 Tool Holder

New COLLIS Cat 30 75241 CV30SMH .7500-2.00 Tool Holder

  • Happy Valley, Oregon, United States
  • Jan 30th
New COLLIS 75526 Cat 50 V-Flange Shell Tool Mill End Holder 2.50-2.40

New COLLIS 75526 Cat 50 V-Flange Shell Tool Mill End Holder 2.50-2.40

  • Happy Valley, Oregon, United States
  • Jan 30th
NEW COLLIS Cat 50 V-Flange Shell Tool Mill End Holder 75533 CV50SHM 1.25-3.5

NEW COLLIS Cat 50 V-Flange Shell Tool Mill End Holder 75533 CV50SHM 1.25-3.5

  • Happy Valley, Oregon, United States
  • Jan 30th
QCE3-875 QUICK CHANGE 40 END MILL ADAPTER 7/8"

QCE3-875 QUICK CHANGE 40 END MILL ADAPTER 7/8"

  • Lisle, Illinois, United States
  • Jan 30th
KDK-104 Compatible Parting Bar Combination

KDK-104 Compatible Parting Bar Combination

  • Chino, California, United States
  • Jan 30th
Quick Change Tool Post,90- 115 mm Centre Height-58 x 58 x 37 mm block +4 holders

Quick Change Tool Post,90- 115 mm Centre Height-58 x 58 x 37 mm block +4 holders

  • Delhi, DELHI, India
  • Jan 30th
NEW ALORIS CXA #2 BORING, TURNING & FACING HOLDER GROOVE 1/2" to 3/4" CAP USA

NEW ALORIS CXA #2 BORING, TURNING & FACING HOLDER GROOVE 1/2" to 3/4" CAP USA

  • Modesto, California, United States
  • Jan 30th
Aloris Universal Lathe Spindle and Collet Stop S-1

Aloris Universal Lathe Spindle and Collet Stop S-1

  • Carrollton, Ohio, United States
  • Jan 30th
KDK STYLE 104 EXTENSION TURNING BAR HOLDER LATHES 12-16

KDK STYLE 104 EXTENSION TURNING BAR HOLDER LATHES 12-16

  • Carrollton, Ohio, United States
  • Jan 30th
KDK STYLE 105 MASTER BAR FOR BORING BARS LATHES 12-16

KDK STYLE 105 MASTER BAR FOR BORING BARS LATHES 12-16

  • Carrollton, Ohio, United States
  • Jan 30th
Quick Change Tool Post Holder No. 1 (CXA-300 Series)

Quick Change Tool Post Holder No. 1 (CXA-300 Series)

  • Chino, California, United States
  • Jan 30th
KDK Compatible #153 Tool Holder, Extension Turning-New

KDK Compatible #153 Tool Holder, Extension Turning-New

  • Chino, California, United States
  • Jan 30th
Komet ABS-32 ER20 Collet Chuck Adapter, # A3312130, Used, WARRANTY

Komet ABS-32 ER20 Collet Chuck Adapter, # A3312130, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
Aloris BXA Quick Change Lathe Tool Post 5pc Holder Set

Aloris BXA Quick Change Lathe Tool Post 5pc Holder Set

  • Carrollton, Ohio, United States
  • Jan 30th
KDK-102 THREADING & FACING BAR HOLDER

KDK-102 THREADING & FACING BAR HOLDER

  • Covina, California, United States
  • Jan 30th
1 Kwik Switch 200 Series 80235 acura flex collet chuck with 9/64" collet R#0133

1 Kwik Switch 200 Series 80235 acura flex collet chuck with 9/64" collet R#0133

  • Dayton, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

Parlec C50-77TA4 Compression Tension Tapper New

Parlec C50-77TA4 Compression Tension Tapper New

  • Glendale, Arizona, United States
  • May 26th
Tapmatic - Model 90X, 1/2 Inch Min Tap Capacity

Tapmatic - Model 90X, 1/2 Inch Min Tap Capacity

  • Wilmington, Delaware, United States
  • May 26th
1 USED SANDVIK CARBIDE BORING BAR. MB-E500-17-09R GROOVING BAR. W/ COOL. {J245}

1 USED SANDVIK CARBIDE BORING BAR. MB-E500-17-09R GROOVING BAR. W/ COOL. {J245}

  • Mentor, Ohio, United States
  • May 27th
1 USED SANDVIK CARBIDE BORING BAR. MB-E0625-25-09 GROOVING BAR. W/ COOL. {J244}

1 USED SANDVIK CARBIDE BORING BAR. MB-E0625-25-09 GROOVING BAR. W/ COOL. {J244}

  • Mentor, Ohio, United States
  • May 27th
A10R-SDUPL 2 SANDVIK BORING BAR

A10R-SDUPL 2 SANDVIK BORING BAR

  • Minneapolis, Minnesota, United States
  • May 29th
Valenite 4" dia. Face Mill Part number qwn-40r

Valenite 4" dia. Face Mill Part number qwn-40r

  • Columbia, Kentucky, United States
  • May 29th
Morse 2 arbor adapter

Morse 2 arbor adapter

  • Norwich, Connecticut, United States
  • May 29th
Glenzer- Detroit Morse Taper Adaptor Sleeve, 1-4, used

Glenzer- Detroit Morse Taper Adaptor Sleeve, 1-4, used

  • St Thomas, Ontario, Canada
  • May 29th
Browning Bushing Q1 2, 2" Bore ID, 4 1/8" OD

Browning Bushing Q1 2, 2" Bore ID, 4 1/8" OD

  • Evansville, Indiana, United States
  • May 30th
NEW in Box Taper Bushing 1210 1 1/8

NEW in Box Taper Bushing 1210 1 1/8

  • Robertsdale, Alabama, United States
  • May 30th
BRAND NEW PARLEC-USA BT-40 1/2" SHELL END MILL ADAPTER FREE SHIPPING

BRAND NEW PARLEC-USA BT-40 1/2" SHELL END MILL ADAPTER FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • Jun 1st
BT 40 TOOL HOLDER, DA 200 COLLET CHUCK TOOL HOLDER

BT 40 TOOL HOLDER, DA 200 COLLET CHUCK TOOL HOLDER

  • Fremont, California, United States
  • Jun 1st
Ramsey Sprocket Gear 1307-0802-219816-B-46T 46 Teeth 4 7/8" Bore New

Ramsey Sprocket Gear 1307-0802-219816-B-46T 46 Teeth 4 7/8" Bore New

  • Clover, South Carolina, United States
  • Jun 8th
TTC 85272 Type 'B'Toolholder Bushing,Bushing Diameter:2'

TTC 85272 Type 'B'Toolholder Bushing,Bushing Diameter:2'

  • Duncan, South Carolina, United States
  • Jun 8th
Apex Tool Group 30602 Drill Chuck-1/2" CHUCK W/KEY

Apex Tool Group 30602 Drill Chuck-1/2" CHUCK W/KEY

  • Brooklyn, New York, United States
  • Jun 9th
Shars R8 - 33JT Drill Chuck Arbor R8 - JT33 NEW

Shars R8 - 33JT Drill Chuck Arbor R8 - JT33 NEW

  • Winter Springs, Florida, United States
  • Jun 9th
K4-130CS SUNNEN HONE MANDREL WITH ADAPTER .130" - .135" RANGE

K4-130CS SUNNEN HONE MANDREL WITH ADAPTER .130" - .135" RANGE

  • Cleveland, Ohio, United States
  • Oct 21st
K12-463AH SUNNEN HONE MANDREL WITH ADAPTER .463" - .479" RANGE

K12-463AH SUNNEN HONE MANDREL WITH ADAPTER .463" - .479" RANGE

  • Cleveland, Ohio, United States
  • Oct 21st
11kw 15HP 300hz VFD inverter frequency converter 3ph 380VAC tot 3ph 0-380V 25A

11kw 15HP 300hz VFD inverter frequency converter 3ph 380VAC tot 3ph 0-380V 25A

  • DongGuan, China
  • Nov 1st
7.5kw 10HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph0-380V 17A

7.5kw 10HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph0-380V 17A

  • DongGuan, China
  • Nov 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies