+ Post new Ad
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 0
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 1
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 2
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 3
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 4
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 5
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 0
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 1
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 2
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 3
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 4
QUICK P212-0204 LA/KF 8X8L Diamond Knurl Tool Knurl Holder Cut Type Knurler C10, US $549.95 – Picture 5

Quick P212-0204 La/kf 8x8l Diamond Knurl Tool Knurl Holder Cut Type Knurler C10

US $549.95

  • Saint Louis, Missouri, United States
  • Jan 30th
Open on mobile:
QR code
????? QUICK KNURLING TECHNOLOGIES ????? P212-0204 LA/KF Diamond Knurl Tool Cut Type Knurler - Knurl Holder 1/16" Minimum Capacity 1/2" Maximum Capacity Left Hand Cutting Direction 8X8L Square Shank 5/16" Shank Width 5/16" Shank Height 3-1/4" Shank Length 2 Knurls Required (Not Included) LA/KF Knurl Series Cross / Diamond Pattern 66184 RETAILS OVER 1,099.00 ! FREE PRIORITY MAIL SHIPPING ! ! ! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers!! If there is anything we can do, please just ask.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Quick Knurling Tools
MPN 66184
Brand Quick Knurling Tools
Country/Region of Manufacture Unknown
Model P212-0204

Directions

Similar products from Indexable Tool Holders

Ingersoll 2.0" Insert Mill # 26J2K2082R02

Ingersoll 2.0" Insert Mill # 26J2K2082R02

  • Johnson City, New York, United States
  • Jan 30th
ISCAR 5/8" INDEXABLE END MILL USES ANKX-090408 CARBIDE INSERTS

ISCAR 5/8" INDEXABLE END MILL USES ANKX-090408 CARBIDE INSERTS

  • Cadiz, Kentucky, United States
  • Jan 30th
KYOCERA Ceratip Indexable End Mill MEY40-S32-240 THN02770 <1765>

KYOCERA Ceratip Indexable End Mill MEY40-S32-240 THN02770 <1765>

  • Saint Louis, Missouri, United States
  • Jan 30th
SVJBR2525M16 Out circle Indexable turning screw type tool holder Arbor 93 Degree

SVJBR2525M16 Out circle Indexable turning screw type tool holder Arbor 93 Degree

  • Hong Kong, Hong Kong
  • Jan 30th
MDPNN2020K11 Indexable turning tool holder 62.5 Degree for CNC Lathe Milling

MDPNN2020K11 Indexable turning tool holder 62.5 Degree for CNC Lathe Milling

  • Hong Kong, Hong Kong
  • Jan 30th
MDPNN2020K15 Indexable turning tool holder 62.5 Degree for CNC Lathe Milling

MDPNN2020K15 Indexable turning tool holder 62.5 Degree for CNC Lathe Milling

  • Hong Kong, Hong Kong
  • Jan 30th
SDQCR1212H07 Out circle Indexable turn screw type tool holder Arbor 107.5 Degree

SDQCR1212H07 Out circle Indexable turn screw type tool holder Arbor 107.5 Degree

  • Hong Kong, Hong Kong
  • Jan 30th
ISCAR MM HCD080-090-2T05 IC908 1 PIECE

ISCAR MM HCD080-090-2T05 IC908 1 PIECE

  • Venice, Florida, United States
  • Jan 30th
Lot 1pcs BAP300R C25-25-200 Indexable End Mill Holder Dia 25mm Length 200mm

Lot 1pcs BAP300R C25-25-200 Indexable End Mill Holder Dia 25mm Length 200mm

  • CN, China
  • Jan 30th
Akko ADKT-123-R-1616-2-T15 2mm 1 pcs.

Akko ADKT-123-R-1616-2-T15 2mm 1 pcs.

  • Denizli, default, Turkey
  • Jan 30th
SCLCR10-3 Indexable Boring Bar CCMT Insert Included-New

SCLCR10-3 Indexable Boring Bar CCMT Insert Included-New

  • Chino, California, United States
  • Jan 30th
ISCAR INDEXABLE CHAMDRILL BODY DCM 0531-265-063A-5D

ISCAR INDEXABLE CHAMDRILL BODY DCM 0531-265-063A-5D

  • New Britain, Connecticut, United States
  • Jan 30th
KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH INSERT__KSFR-164C__ #7

KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH INSERT__KSFR-164C__ #7

  • Ukiah, California, United States
  • Jan 30th
KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH INSERT__KTCN-644C__#12

KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH INSERT__KTCN-644C__#12

  • Ukiah, California, United States
  • Jan 30th
KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH PAD__DTCNR-164C__ #5

KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH PAD__DTCNR-164C__ #5

  • Ukiah, California, United States
  • Jan 30th
KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER__DWSS-164__ #6

KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER__DWSS-164__ #6

  • Ukiah, California, United States
  • Jan 30th
KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH INSERT__DTGNR-164D__ #9

KENNAMETAL INDEXABLE CARBIDE TOOLHOLDER WITH INSERT__DTGNR-164D__ #9

  • Ukiah, California, United States
  • Jan 30th
LMT FETTE 3/4&#034; Right Hand Point Blank Medium Steel Tool Holder Kit -EDP #53664

LMT FETTE 3/4" Right Hand Point Blank Medium Steel Tool Holder Kit -EDP #53664

  • Venice, Florida, United States
  • Jan 30th
WHITNEY PARTS &amp; TOOLING TOP CLAMP INSERT 663537, 4 1/8&#034; OAL, 1 3/8&#034; DEPTH

WHITNEY PARTS & TOOLING TOP CLAMP INSERT 663537, 4 1/8" OAL, 1 3/8" DEPTH

  • Coffeyville, Kansas, United States
  • Jan 30th
Kyocera CERATIP S100-DRZ1751-06 Magic Drill 7-110234 17mm

Kyocera CERATIP S100-DRZ1751-06 Magic Drill 7-110234 17mm

  • Berea, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

PARLEC (?) CAT40 #4 MORSE TAPER HOLDER CAT 40 MT MORE TOOLING LISTED LOT C11999

PARLEC (?) CAT40 #4 MORSE TAPER HOLDER CAT 40 MT MORE TOOLING LISTED LOT C11999

  • Dayton, Ohio, United States
  • Mar 8th
VALENITE CAT40 1&#034; DIAMETER ENDMILL HOLDER MORE LISTED END MILL CAT 40 LOT C11991

VALENITE CAT40 1" DIAMETER ENDMILL HOLDER MORE LISTED END MILL CAT 40 LOT C11991

  • Dayton, Ohio, United States
  • Mar 8th
TMX 5/8&#034; INDEXABLE BORING BAR WITH KENNAMETAL DCMT CARBIDE INSERTS

TMX 5/8" INDEXABLE BORING BAR WITH KENNAMETAL DCMT CARBIDE INSERTS

  • Cadiz, Kentucky, United States
  • Mar 10th
TMX 3/4&#034; INDEXABLE BORING BAR WITH KENNAMETAL DPMT CARBIDE INSERTS

TMX 3/4" INDEXABLE BORING BAR WITH KENNAMETAL DPMT CARBIDE INSERTS

  • Cadiz, Kentucky, United States
  • Mar 10th
NEW BISON 7-445-005 MT1 to MT2 Arbor Morse Taper Adapter Reducing Drill SLEEVE

NEW BISON 7-445-005 MT1 to MT2 Arbor Morse Taper Adapter Reducing Drill SLEEVE

  • Saint Louis, Missouri, United States
  • Mar 28th
NEW IMPORT HARD STEEL MT1 to MT3 Arbor Morse Taper Adapter Reducing Drill Sleeve

NEW IMPORT HARD STEEL MT1 to MT3 Arbor Morse Taper Adapter Reducing Drill Sleeve

  • Saint Louis, Missouri, United States
  • Mar 28th
New! Browning Q1-1-1/4 split taper bushing 1-1/4&#034; bore Q1111/4

New! Browning Q1-1-1/4 split taper bushing 1-1/4" bore Q1111/4

  • Francis Creek, Wisconsin, United States
  • May 5th
J Style Tool Holder Bushing for Mazak , Okuma, Haas 1-1/2&#034; O.D. ,1&#034; I.D.

J Style Tool Holder Bushing for Mazak , Okuma, Haas 1-1/2" O.D. ,1" I.D.

  • Lake in the Hills, Illinois, United States
  • May 5th
VALENITE BT 40 TG100 COLLET CHUCK 2-1/2&#034; PROJECTION STK 6950

VALENITE BT 40 TG100 COLLET CHUCK 2-1/2" PROJECTION STK 6950

  • Wadley, Alabama, United States
  • May 24th
CARBOLOY BT 40 TG100 COLLET CHUCK 2-7/8&#034; PROJECTION STK 6954

CARBOLOY BT 40 TG100 COLLET CHUCK 2-7/8" PROJECTION STK 6954

  • Wadley, Alabama, United States
  • May 24th
LOT OF 3 TOOL HOLDERS W/ .400 &amp; 1&#034; CAP W/ 1 &#034; SHANK

LOT OF 3 TOOL HOLDERS W/ .400 & 1" CAP W/ 1 " SHANK

  • California, United States
  • May 25th
Lyndex NMTB 30 3/8&#039;&#039; Endmill Holder 1.75&#034; PRO N3006 0375 (LOC578A)

Lyndex NMTB 30 3/8'' Endmill Holder 1.75" PRO N3006 0375 (LOC578A)

  • Laingsburg, Michigan, United States
  • May 25th
Jacobs Model 14N 1/2&#034; x 3JT Super Ball Bearing Keyed Drill Chuck- TIR .003&#034;

Jacobs Model 14N 1/2" x 3JT Super Ball Bearing Keyed Drill Chuck- TIR .003"

  • Hamden, Connecticut, United States
  • Jun 3rd
Jacobs Model 8-1/2N 1/4&#034; x 2SJT Super Ball Bearing Keyed Drill Chuck- TIR .003&#034;

Jacobs Model 8-1/2N 1/4" x 2SJT Super Ball Bearing Keyed Drill Chuck- TIR .003"

  • Hamden, Connecticut, United States
  • Jun 3rd
2 Yuasa J6 Quick Change Tool Holders

2 Yuasa J6 Quick Change Tool Holders

  • Millstone Township, New Jersey, United States
  • Jun 3rd
Nikken NQM4-35 Quick Change Tap Collet Holder with 1/4&#034;, 5/16&#034;, 3/8&#034; Taps

Nikken NQM4-35 Quick Change Tap Collet Holder with 1/4", 5/16", 3/8" Taps

  • Millstone Township, New Jersey, United States
  • Jun 3rd
Superior hone mandrel 5pc set A-6-7 to A-10-10 Vari Sizes

Superior hone mandrel 5pc set A-6-7 to A-10-10 Vari Sizes

  • Montebello, California, United States
  • Jun 9th
Superior hone mandrel 5pc set A-6-7 to A-11-10 sizes vari

Superior hone mandrel 5pc set A-6-7 to A-11-10 sizes vari

  • Montebello, California, United States
  • Jun 9th
Fischer PRECISE collet SC40 D1.5 (Sc42), for PRECISE Spindle SC 40 (SC 42)

Fischer PRECISE collet SC40 D1.5 (Sc42), for PRECISE Spindle SC 40 (SC 42)

  • Europe, Ukraine
  • Oct 20th
Fischer PRECISE collet SC40 D3.15 (Sc42), for PRECISE Spindle SC 40 (SC 42)

Fischer PRECISE collet SC40 D3.15 (Sc42), for PRECISE Spindle SC 40 (SC 42)

  • Europe, Ukraine
  • Oct 20th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies