+ Post new Ad
Rayco Vacuum Clamping Kit and Manifold Fixture Plate, US $740 – Picture 0
Rayco Vacuum Clamping Kit and Manifold Fixture Plate, US $740 – Picture 0

Rayco Vacuum Clamping Kit And Manifold Fixture Plate

US $740

  • Morrisville, North Carolina, United States
  • Nov 6th
Open on mobile:
QR code
Rayco Vacuum Fixture Plate Kit. This is a great Modular Fixture Kit for measuring your parts on an Optical Comparator of Video Measuring Machine. Comes with the Acrylic 7" x 9"  Plate with 9-Port Manifold, Suction Cups, Vacuum Pump, 9 Air Lines, Tension Springs, Standoffs and Slide Bases. The Plate has 4 holes that were enlarged for a special application, see above. The thread sizes in the Fixture Plate is 1/4-20, with .500" spacing. The plate thickness is .750". This kit comes with everything pictured above.

Directions

Similar products from Fittings & Plates

Hardinge C3-A Tool Seting Fixture for DSA

Hardinge C3-A Tool Seting Fixture for DSA

  • New Britain, Connecticut, United States
  • Nov 8th
MACHINIST ANGLE BLOCK , SETUP BLOCK 2 5/16" X 3 1/16" X 3 3/8"

MACHINIST ANGLE BLOCK , SETUP BLOCK 2 5/16" X 3 1/16" X 3 3/8"

  • Batavia, Illinois, United States
  • Nov 8th
HHIP 3402-0310 10" x 8" x 6" Slotted Angle Plate, Webbed

HHIP 3402-0310 10" x 8" x 6" Slotted Angle Plate, Webbed

  • USA, United States
  • Nov 8th
10" x 8" x 6" Precision Right Angle Plate Machining Mill Set Up Block, Used

10" x 8" x 6" Precision Right Angle Plate Machining Mill Set Up Block, Used

  • Lorain, Ohio, United States
  • Nov 8th
Cast iron bench iron stand 33” height 10x7 mounting plate ---Local Pickup

Cast iron bench iron stand 33” height 10x7 mounting plate ---Local Pickup

  • Trumbull, Connecticut, United States
  • Nov 7th
5-C Spin Index w/1" Collet & Tooling (#1307MT)

5-C Spin Index w/1" Collet & Tooling (#1307MT)

  • Chino, California, United States
  • Nov 7th
Magnetic sine plate

Magnetic sine plate

  • Upland, California, United States
  • Nov 7th
Suburban tool sine plate SP-66-S1

Suburban tool sine plate SP-66-S1

  • Nevada, United States
  • Nov 7th
HHIP 2-1/2 INCH SINE BAR (3402-1203)

HHIP 2-1/2 INCH SINE BAR (3402-1203)

  • USA, United States
  • Nov 7th
Starrett Crystal Pink 18 X 24 X 6 with stand and cover

Starrett Crystal Pink 18 X 24 X 6 with stand and cover

  • East Norwich, New York, United States
  • Nov 7th
Cleveland Universal Jig Co. 0A8 And 0A8AV Fixtures

Cleveland Universal Jig Co. 0A8 And 0A8AV Fixtures

  • Osceola, Nebraska, United States
  • Nov 6th
Jergens sub plate

Jergens sub plate

  • Cincinnati, Ohio, United States
  • Nov 6th
4" Right Angle Mill Milling Set Up Mounting Positioning Block Fixture Plate

4" Right Angle Mill Milling Set Up Mounting Positioning Block Fixture Plate

  • Mertztown, Pennsylvania, United States
  • Nov 6th
2 Right Angle Mill Milling Set Up Mounting Positioning Block Fixture Plate

2 Right Angle Mill Milling Set Up Mounting Positioning Block Fixture Plate

  • Mertztown, Pennsylvania, United States
  • Nov 6th
Jam 3 Ton Mechanical Punch Press Multi Stroke Single Phase Model GPN 305S

Jam 3 Ton Mechanical Punch Press Multi Stroke Single Phase Model GPN 305S

  • Hopkins, Minnesota, United States
  • Nov 6th
ZEATZ PRECISION 10" UNIVERSAL DIVIDING HEAD W/ BUCK 6" 6 JAW CHUCK + TAIL STOCK

ZEATZ PRECISION 10" UNIVERSAL DIVIDING HEAD W/ BUCK 6" 6 JAW CHUCK + TAIL STOCK

  • Ellington, New York, United States
  • Nov 5th
YUASA MODEL TSP-4 CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 3-1/2"- 4-1/2"

YUASA MODEL TSP-4 CAST IRON TAIL STOCK ADJUSTABLE CENTER HEIGHT 3-1/2"- 4-1/2"

  • Ellington, New York, United States
  • Nov 5th
NICE! YUASA NEWS 5C COLLET INDEXING FIXTURE HZ VT + HARDINGE COLLET

NICE! YUASA NEWS 5C COLLET INDEXING FIXTURE HZ VT + HARDINGE COLLET

  • Ellington, New York, United States
  • Nov 5th
6" x 2-1/4" PRECISION SINE PLATE FIXTURE TILTING SET UP

6" x 2-1/4" PRECISION SINE PLATE FIXTURE TILTING SET UP

  • Ellington, New York, United States
  • Nov 5th
ANGLE PLATES PAIR 14"W x 66"H x 29-3/4"D T-Slots (29544)

ANGLE PLATES PAIR 14"W x 66"H x 29-3/4"D T-Slots (29544)

  • Wixom, Michigan, United States
  • Nov 5th

People who viewed this item also vieved

V-Blocks 4" Wide x 2-5/8" High x 1-5/8" Thick Set of 2

V-Blocks 4" Wide x 2-5/8" High x 1-5/8" Thick Set of 2

  • Garden City, Idaho, United States
  • Jan 30th
Cast Iron V-Block Set

Cast Iron V-Block Set

  • Garden City, Idaho, United States
  • Jan 30th
1/8" HIGH PRECISION MACHINIST PARALLEL SET .0002 STEEL 10 PAIR THIN PARALLELS

1/8" HIGH PRECISION MACHINIST PARALLEL SET .0002 STEEL 10 PAIR THIN PARALLELS

  • Huntington Beach, California, United States
  • Jan 30th
NEW ATLAS CRAFTSMAN 6 INCH LATHE #1 MORSE TAPER DEAD CENTER HARDENED NEW

NEW ATLAS CRAFTSMAN 6 INCH LATHE #1 MORSE TAPER DEAD CENTER HARDENED NEW

  • Niles, Michigan, United States
  • Jan 30th
LIVE CENTER LATHE KIT RECOR POWER CORONET REVOLVING KIT EXCELLENT CWA101

LIVE CENTER LATHE KIT RECOR POWER CORONET REVOLVING KIT EXCELLENT CWA101

  • Naperville, Illinois, United States
  • Jan 30th
Lathe center____1849/3

Lathe center____1849/3

  • Saint Louis, Missouri, United States
  • Jan 30th
Craftsman Four Jaw Lathe Chuck

Craftsman Four Jaw Lathe Chuck

  • Cummington, Massachusetts, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Lathe Chuck Jaws some Ralmikes

MACHINIST LATHE MILL Lot of Lathe Chuck Jaws some Ralmikes

  • Morris Plains, New Jersey, United States
  • Jan 30th
TURRET LATHE TOOL HOLDER

TURRET LATHE TOOL HOLDER

  • West Point, Pennsylvania, United States
  • Jan 30th
Mill Tooling Hold Down Step Block Bridgeport

Mill Tooling Hold Down Step Block Bridgeport

  • Belleville, Illinois, United States
  • Jan 30th
New Craftsman Flexible line clamps item#294J

New Craftsman Flexible line clamps item#294J

  • Clinton, New York, United States
  • Jan 30th
VINTAGE HARGRAVE 10 CLAMP No. 44 CINCINNATI TOOL CO. U.S.A.

VINTAGE HARGRAVE 10 CLAMP No. 44 CINCINNATI TOOL CO. U.S.A.

  • Youngtown, Arizona, United States
  • Jan 30th
40 NMTB Tooling Collet chuck, solid holder, arbor, CNC mill tooling, Bridgeport

40 NMTB Tooling Collet chuck, solid holder, arbor, CNC mill tooling, Bridgeport

  • Murfreesboro, Tennessee, United States
  • Jan 30th
rego-fix er 8 flex collet chuck CYL 3/8 " X 070 ER8M for Machinist Gunsmith New

rego-fix er 8 flex collet chuck CYL 3/8 " X 070 ER8M for Machinist Gunsmith New

  • Bennett, Colorado, United States
  • Jan 30th
Hardinge 5C 2" EDC for Threaded Spindles # 14330000000000

Hardinge 5C 2" EDC for Threaded Spindles # 14330000000000

  • West Warwick, Rhode Island, United States
  • Jan 30th
Hardinge O.S. Davenport Collet .422"

Hardinge O.S. Davenport Collet .422"

  • Coventry, Rhode Island, United States
  • Jan 30th
Hardinge O.S. Davenport Collet 1/2"

Hardinge O.S. Davenport Collet 1/2"

  • Coventry, Rhode Island, United States
  • Jan 30th
Hardinge O.S. Davenport Collet 1/4"

Hardinge O.S. Davenport Collet 1/4"

  • Coventry, Rhode Island, United States
  • Jan 30th
POMONA 72085-0 TEST ADAPTER *NEW IN A FACTORY BAG*

POMONA 72085-0 TEST ADAPTER *NEW IN A FACTORY BAG*

  • Camarillo, California, United States
  • Jan 30th
DRESSER 0545805N SPRING *NEW OUT OF BOX*

DRESSER 0545805N SPRING *NEW OUT OF BOX*

  • Camarillo, California, United States
  • Jan 30th
LOT OF 5 SWAGELOK SS-1014-1 BACK FERRULE *NEW IN A FACTORY BAG*

LOT OF 5 SWAGELOK SS-1014-1 BACK FERRULE *NEW IN A FACTORY BAG*

  • Camarillo, California, United States
  • Jan 30th
MACHINIST MILL LATHE TOOL Small Micro Rotary Table 5 1/2" for Milling Machine

MACHINIST MILL LATHE TOOL Small Micro Rotary Table 5 1/2" for Milling Machine

  • Morris Plains, New Jersey, United States
  • Jan 30th
3" TILTING ROTARY TABLE

3" TILTING ROTARY TABLE

  • Baton Rouge, Louisiana, United States
  • Jan 30th
ATS CNC Mill 4th Axis Rotary Table , Mori Seiki , Haas , Fadal ,Dividing Head

ATS CNC Mill 4th Axis Rotary Table , Mori Seiki , Haas , Fadal ,Dividing Head

  • Apple Valley, California, United States
  • Jan 30th
HEAVY DUTY RIGDID PIPE VISE CLAMP TABLETOP BENCH TRUCK MOUNT PLUMBERS

HEAVY DUTY RIGDID PIPE VISE CLAMP TABLETOP BENCH TRUCK MOUNT PLUMBERS

  • Berne, Indiana, United States
  • Jan 30th
Reed pipe vise 4688-348 4

Reed pipe vise 4688-348 4

  • Hillsdale, New Jersey, United States
  • Jan 30th
One lot of Working Vise 3288-25 6

One lot of Working Vise 3288-25 6

  • Hillsdale, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies